Məhsul təfərrüatları üçün spesifikasiyalara baxın.
PIC18F26K83T-I/SO
Product Overview
Category
The PIC18F26K83T-I/SO belongs to the category of microcontrollers.
Use
This microcontroller is commonly used in various electronic devices and systems for control and processing purposes.
Characteristics
- High-performance 8-bit architecture
- Low power consumption
- Enhanced peripheral integration
- Ample program memory and data memory
- Wide operating voltage range
- Flexible input/output options
Package
The PIC18F26K83T-I/SO is available in a small outline (SO) package, which is suitable for surface mount applications.
Essence
The essence of this microcontroller lies in its ability to provide efficient and reliable control and processing capabilities for a wide range of electronic devices and systems.
Packaging/Quantity
The PIC18F26K83T-I/SO is typically packaged in reels or tubes, with a quantity of 250 units per reel/tube.
Specifications
- Microcontroller Family: PIC18
- Core Size: 8-bit
- Program Memory Size: 64 KB
- RAM Size: 4 KB
- Number of I/O Pins: 35
- Operating Voltage Range: 1.8V to 5.5V
- Maximum Clock Frequency: 64 MHz
- Communication Interfaces: UART, SPI, I2C
- Analog-to-Digital Converter (ADC): 10-bit, 13 channels
- Timers/Counters: 4 x 8-bit, 3 x 16-bit
- Operating Temperature Range: -40°C to +125°C
Detailed Pin Configuration
The PIC18F26K83T-I/SO has a total of 35 pins, each serving a specific purpose. The pin configuration is as follows:
- Pin 1: VDD - Power supply voltage
- Pin 2: VSS - Ground
- Pin 3: RA0/AN0 - Analog input or digital I/O
- Pin 4: RA1/AN1 - Analog input or digital I/O
- Pin 5: RA2/AN2 - Analog input or digital I/O
- Pin 6: RA3/AN3 - Analog input or digital I/O
- Pin 7: RA4/T0CKI/C1OUT - Timer0 clock input or digital I/O
- Pin 8: RA5/AN4/SS1 - Analog input or digital I/O
- Pin 9: RE3/MCLR/VPP - Master Clear input or programming voltage
- Pin 10: RE0/AN5/C2IN1-/CK1SPP - Analog input or digital I/O
- ... (continue with the remaining pins)
Functional Features
The PIC18F26K83T-I/SO offers several functional features that enhance its performance and versatility:
- Enhanced Core: The microcontroller's 8-bit architecture provides efficient processing capabilities.
- Peripheral Integration: Integrated peripherals such as UART, SPI, and I2C enable seamless communication with other devices.
- Ample Memory: Sufficient program memory and data memory allow for complex applications.
- Low Power Consumption: The microcontroller is designed to minimize power consumption, making it suitable for battery-powered devices.
- Flexible I/O Options: The numerous I/O pins offer flexibility in connecting external components and sensors.
Advantages and Disadvantages
Advantages
- High-performance processing capabilities
- Wide operating voltage range
- Enhanced peripheral integration
- Ample memory for complex applications
- Low power consumption
Disadvantages
- Limited number of I/O pins compared to some other microcontrollers
- Relatively higher cost compared to lower-end microcontrollers
Working Principles
The PIC18F26K83T-I/SO operates based on the principles of digital logic and microcontroller architecture. It executes instructions stored in its program memory to perform various tasks, such as data processing, control, and communication. The microcontroller interacts with external devices and sensors through its I/O pins and integrated peripherals.
Detailed Application Field Plans
The PIC18F26K83T-I/SO finds applications in a wide range of fields, including but not limited to:
- Industrial Automation: Control systems for manufacturing processes and machinery.
- Consumer Electronics: Smart home devices, wearable technology, and entertainment systems.
- Automotive: Engine control units, dashboard displays, and vehicle diagnostics.
- Medical Devices: Patient monitoring systems, diagnostic equipment, and implantable devices.
- Internet of Things (IoT): Connected devices and systems for home automation, agriculture, and environmental monitoring.
Detailed and Complete Alternative Models
- PIC18F25K83T-I/SO
- PIC18F27K83T-I/SO
- PIC18F24K83T-I/SO
Texniki həllərdə PIC18F26K83T-I/SO tətbiqi ilə bağlı 10 ümumi sual və cavabı sadalayın
What is the maximum operating frequency of PIC18F26K83T-I/SO?
- The maximum operating frequency of PIC18F26K83T-I/SO is 64 MHz.
What are the key features of PIC18F26K83T-I/SO?
- The key features of PIC18F26K83T-I/SO include 64 KB Flash program memory, 3.5 KB RAM, 1.8V-5.5V operating voltage range, and multiple communication interfaces.
Can PIC18F26K83T-I/SO be used for motor control applications?
- Yes, PIC18F26K83T-I/SO can be used for motor control applications due to its integrated peripherals such as PWM modules and high-speed comparators.
Does PIC18F26K83T-I/SO support USB communication?
- Yes, PIC18F26K83T-I/SO supports USB communication through its integrated USB module.
What development tools are available for programming PIC18F26K83T-I/SO?
- Development tools such as MPLAB X IDE and MPLAB Code Configurator can be used for programming and configuring PIC18F26K83T-I/SO.
Is PIC18F26K83T-I/SO suitable for low-power applications?
- Yes, PIC18F26K83T-I/SO is suitable for low-power applications with its low-power modes and low standby current consumption.
Can PIC18F26K83T-I/SO be used in industrial automation systems?
- Yes, PIC18F26K83T-I/SO is suitable for industrial automation systems due to its robust communication interfaces and peripheral integration.
What are the available package options for PIC18F26K83T-I/SO?
- PIC18F26K83T-I/SO is available in a 28-pin SOIC package.
Does PIC18F26K83T-I/SO have built-in security features?
- Yes, PIC18F26K83T-I/SO includes security features such as code protection and write-protectable Flash memory.
Are there any application notes or reference designs available for PIC18F26K83T-I/SO?
- Yes, Microchip provides application notes and reference designs for various applications using PIC18F26K83T-I/SO.