Microchip Technology
Şəkil təsvir ola bilər.
Məhsul təfərrüatları üçün spesifikasiyalara baxın.
PIC18F27K40-I/ML
Ətraflı Baxın Məlumat vərəqləri

PIC18F27K40-I/ML

Product Overview

Category

The PIC18F27K40-I/ML belongs to the category of microcontrollers.

Use

This microcontroller is commonly used in various electronic applications that require embedded control and processing capabilities.

Characteristics

  • High-performance 8-bit architecture
  • Flash memory for program storage
  • Integrated peripherals for enhanced functionality
  • Low power consumption
  • Wide operating voltage range

Package

The PIC18F27K40-I/ML is available in a small form factor package, known as the ML package. This package provides ease of integration into compact designs.

Essence

The essence of the PIC18F27K40-I/ML lies in its ability to provide efficient and reliable control and processing capabilities in a compact package.

Packaging/Quantity

The PIC18F27K40-I/ML is typically packaged in reels or tubes, with a quantity of 1000 units per reel/tube.

Specifications

  • Microcontroller Family: PIC18
  • Core Size: 8-bit
  • Program Memory Size: 128 KB
  • RAM Size: 3.8 KB
  • Number of I/O Pins: 28
  • Operating Voltage Range: 2.3V to 5.5V
  • Maximum Clock Frequency: 64 MHz
  • Data Bus Width: 8-bit
  • ADC Resolution: 10-bit
  • Communication Interfaces: UART, SPI, I2C
  • Timers/Counters: 4 x 8-bit, 1 x 16-bit

Detailed Pin Configuration

The PIC18F27K40-I/ML has a total of 28 pins, each serving a specific purpose. The pin configuration is as follows:

  1. VDD - Power supply voltage
  2. RA0 - General-purpose I/O pin
  3. RA1 - General-purpose I/O pin
  4. RA2 - General-purpose I/O pin
  5. RA3 - General-purpose I/O pin
  6. RA4 - General-purpose I/O pin
  7. RA5 - General-purpose I/O pin
  8. VSS - Ground
  9. RB0 - General-purpose I/O pin
  10. RB1 - General-purpose I/O pin
  11. RB2 - General-purpose I/O pin
  12. RB3 - General-purpose I/O pin
  13. RB4 - General-purpose I/O pin
  14. RB5 - General-purpose I/O pin
  15. RB6 - General-purpose I/O pin
  16. RB7 - General-purpose I/O pin
  17. RC0 - General-purpose I/O pin
  18. RC1 - General-purpose I/O pin
  19. RC2 - General-purpose I/O pin
  20. RC3 - General-purpose I/O pin
  21. RC4 - General-purpose I/O pin
  22. RC5 - General-purpose I/O pin
  23. RC6 - General-purpose I/O pin
  24. RC7 - General-purpose I/O pin
  25. OSC1/CLKI - Oscillator input
  26. OSC2/CLKO - Oscillator output
  27. VCAP - Capacitor connection for internal voltage regulator
  28. MCLR/VPP - Master Clear input

Functional Features

The PIC18F27K40-I/ML offers a range of functional features that enhance its usability and performance. Some notable features include:

  • High-speed processing capabilities
  • Enhanced peripheral integration, including UART, SPI, and I2C interfaces
  • On-chip flash memory for program storage
  • Low power consumption modes for energy efficiency
  • Multiple timers/counters for precise timing operations
  • Analog-to-Digital Converter (ADC) for analog signal processing
  • Flexible I/O pins for versatile connectivity options

Advantages and Disadvantages

Advantages

  • High-performance 8-bit architecture enables efficient processing.
  • Integrated peripherals reduce the need for external components, saving cost and board space.
  • Low power consumption extends battery life in portable applications.
  • Wide operating voltage range allows compatibility with various power sources.

Disadvantages

  • Limited program memory size may restrict the complexity of applications.
  • 8-bit architecture may not be suitable for certain demanding computational tasks.
  • Limited number of I/O pins may limit the connectivity options in complex systems.

Working Principles

The PIC18F27K40-I/ML operates based on the principles of microcontroller architecture. It executes instructions stored in its flash memory to perform desired tasks. The integrated peripherals and I/O pins allow interaction with external devices and sensors. The microcontroller's clock generates timing signals for precise operation, while the ADC converts analog signals into digital data for processing.

Detailed Application Field Plans

The PIC18F27K40-I/ML finds applications in various fields, including but not limited to:

  1. Industrial automation: Control systems, motor control, and

Texniki həllərdə PIC18F27K40-I/ML tətbiqi ilə bağlı 10 ümumi sual və cavabı sadalayın

  1. Question: What is the maximum operating frequency of PIC18F27K40-I/ML?
    Answer: The maximum operating frequency of PIC18F27K40-I/ML is 64 MHz.

  2. Question: What are the key features of PIC18F27K40-I/ML?
    Answer: Some key features of PIC18F27K40-I/ML include 128 KB Flash program memory, 3.5 KB RAM, and 1.8V-5.5V operating voltage range.

  3. Question: Can PIC18F27K40-I/ML be used for motor control applications?
    Answer: Yes, PIC18F27K40-I/ML can be used for motor control applications with its integrated PWM modules and high-speed ADC.

  4. Question: What communication interfaces are supported by PIC18F27K40-I/ML?
    Answer: PIC18F27K40-I/ML supports SPI, I2C, and UART communication interfaces.

  5. Question: Is PIC18F27K40-I/ML suitable for battery-powered applications?
    Answer: Yes, PIC18F27K40-I/ML's low-power modes and wide operating voltage range make it suitable for battery-powered applications.

  6. Question: Can PIC18F27K40-I/ML be programmed using C language?
    Answer: Yes, PIC18F27K40-I/ML can be programmed using C language with the MPLAB XC8 compiler.

  7. Question: What development tools are available for PIC18F27K40-I/ML?
    Answer: Development tools such as MPLAB X IDE and PICkit 4 programmer/debugger are available for PIC18F27K40-I/ML.

  8. Question: Does PIC18F27K40-I/ML have built-in security features?
    Answer: Yes, PIC18F27K40-I/ML includes hardware and software security features to protect code and data.

  9. Question: What are the temperature specifications for PIC18F27K40-I/ML?
    Answer: PIC18F27K40-I/ML has an operating temperature range of -40°C to 125°C.

  10. Question: Can PIC18F27K40-I/ML be used in industrial automation applications?
    Answer: Yes, PIC18F27K40-I/ML is suitable for industrial automation applications due to its robust design and communication capabilities.