Microchip Technology
Şəkil təsvir ola bilər.
Məhsul təfərrüatları üçün spesifikasiyalara baxın.
PIC18F44J10-I/ML
Ətraflı Baxın Məlumat vərəqləri

PIC18F44J10-I/ML

Product Overview

Category

The PIC18F44J10-I/ML belongs to the category of microcontrollers.

Use

This microcontroller is commonly used in various electronic devices and embedded systems for controlling and processing data.

Characteristics

  • High-performance 8-bit architecture
  • Flash program memory
  • Low power consumption
  • Wide operating voltage range
  • Integrated peripherals for enhanced functionality

Package

The PIC18F44J10-I/ML is available in a small form factor package, known as ML (Micro Leadframe).

Essence

The essence of this microcontroller lies in its ability to provide efficient control and processing capabilities in a compact package.

Packaging/Quantity

The PIC18F44J10-I/ML is typically packaged in reels or tubes, with a quantity of 1000 units per package.

Specifications

  • Architecture: 8-bit
  • Program Memory Size: 16 KB
  • RAM Size: 1 KB
  • Operating Voltage Range: 2.3V to 5.5V
  • Maximum Speed: 40 MHz
  • Number of I/O Pins: 36
  • ADC Channels: 12
  • UART Modules: 2
  • Timers: 4
  • Comparators: 2

Detailed Pin Configuration

The PIC18F44J10-I/ML has a total of 36 pins, each serving a specific purpose. The pin configuration is as follows:

  1. VDD - Power supply voltage
  2. RA0 - General-purpose I/O pin
  3. RA1 - General-purpose I/O pin
  4. RA2 - General-purpose I/O pin
  5. RA3 - General-purpose I/O pin
  6. RA4 - General-purpose I/O pin
  7. RA5 - General-purpose I/O pin
  8. VSS - Ground
  9. OSC1/CLKIN - Oscillator input
  10. OSC2/CLKOUT - Oscillator output
  11. RC0 - General-purpose I/O pin
  12. RC1 - General-purpose I/O pin
  13. RC2 - General-purpose I/O pin
  14. RC3 - General-purpose I/O pin
  15. RC4 - General-purpose I/O pin
  16. RC5 - General-purpose I/O pin
  17. RC6 - General-purpose I/O pin
  18. RC7 - General-purpose I/O pin
  19. VUSB - USB power supply
  20. RB0 - General-purpose I/O pin
  21. RB1 - General-purpose I/O pin
  22. RB2 - General-purpose I/O pin
  23. RB3 - General-purpose I/O pin
  24. RB4 - General-purpose I/O pin
  25. RB5 - General-purpose I/O pin
  26. RB6 - General-purpose I/O pin
  27. RB7 - General-purpose I/O pin
  28. RB8 - General-purpose I/O pin
  29. RB9 - General-purpose I/O pin
  30. RB10 - General-purpose I/O pin
  31. RB11 - General-purpose I/O pin
  32. RB12 - General-purpose I/O pin
  33. RB13 - General-purpose I/O pin
  34. RB14 - General-purpose I/O pin
  35. RB15 - General-purpose I/O pin
  36. VDDCORE - Core voltage supply

Functional Features

The PIC18F44J10-I/ML offers several functional features that enhance its capabilities:

  • Flash program memory for storing and executing code
  • Integrated analog-to-digital converters (ADC) for precise measurements
  • Universal asynchronous receiver-transmitter (UART) modules for serial communication
  • Timers for accurate timing and event generation
  • Comparators for analog signal comparisons

Advantages and Disadvantages

Advantages

  • High-performance 8-bit architecture allows for efficient processing of data
  • Low power consumption makes it suitable for battery-powered applications
  • Wide operating voltage range provides flexibility in various power supply scenarios
  • Integrated peripherals reduce the need for external components, saving cost and board space

Disadvantages

  • Limited program memory size may restrict the complexity of applications
  • Limited RAM size may impose constraints on data storage and manipulation
  • Lack of advanced features found in higher-end microcontrollers

Working Principles

The PIC18F44J10-I/ML operates based on the principles of a typical microcontroller. It executes instructions stored in its program memory, interacts with external devices through its I/O pins, and utilizes its integrated peripherals to perform specific tasks. The microcontroller's internal clock generates timing signals for synchronization, ensuring accurate operation.

Detailed Application Field Plans

The PIC18F44J10-I/ML finds applications in various fields, including but not limited to:

  1. Industrial automation: Controlling machinery and processes in manufacturing plants.
  2. Consumer electronics

Texniki həllərdə PIC18F44J10-I/ML tətbiqi ilə bağlı 10 ümumi sual və cavabı sadalayın

  1. Question: What is the maximum operating frequency of PIC18F44J10-I/ML?
    Answer: The maximum operating frequency of PIC18F44J10-I/ML is 32 MHz.

  2. Question: What are the key features of PIC18F44J10-I/ML?
    Answer: The key features of PIC18F44J10-I/ML include 16KB Flash program memory, 256 bytes of EEPROM data memory, and 1.5 KB of SRAM.

  3. Question: Can PIC18F44J10-I/ML be used for low-power applications?
    Answer: Yes, PIC18F44J10-I/ML is suitable for low-power applications due to its low power consumption and multiple low-power modes.

  4. Question: What communication interfaces are supported by PIC18F44J10-I/ML?
    Answer: PIC18F44J10-I/ML supports SPI, I2C, and UART communication interfaces.

  5. Question: Is it possible to use PIC18F44J10-I/ML for analog signal processing?
    Answer: Yes, PIC18F44J10-I/ML has built-in analog-to-digital converters (ADC) and can be used for analog signal processing.

  6. Question: What development tools are available for programming PIC18F44J10-I/ML?
    Answer: Development tools such as MPLAB X IDE and MPLAB XC8 compiler can be used for programming PIC18F44J10-I/ML.

  7. Question: Can PIC18F44J10-I/ML be used in industrial control applications?
    Answer: Yes, PIC18F44J10-I/ML is suitable for industrial control applications due to its robust design and peripheral support.

  8. Question: What are the available package options for PIC18F44J10-I/ML?
    Answer: PIC18F44J10-I/ML is available in a 28-pin QFN package.

  9. Question: Does PIC18F44J10-I/ML have built-in security features?
    Answer: Yes, PIC18F44J10-I/ML offers various security features such as code protection and write-protectable flash memory.

  10. Question: Can PIC18F44J10-I/ML be used in automotive applications?
    Answer: Yes, PIC18F44J10-I/ML is suitable for automotive applications due to its wide operating voltage range and temperature tolerance.