Şəkil təsvir ola bilər.
Məhsul təfərrüatları üçün spesifikasiyalara baxın.
PIC18F46K80-E/ML

PIC18F46K80-E/ML

Product Overview

Category

The PIC18F46K80-E/ML belongs to the category of microcontrollers.

Use

This microcontroller is commonly used in various electronic applications that require embedded control and processing capabilities.

Characteristics

  • High-performance 8-bit architecture
  • Flash memory for program storage
  • Integrated peripherals for enhanced functionality
  • Low power consumption
  • Wide operating voltage range
  • Robust communication interfaces

Package

The PIC18F46K80-E/ML is available in a small form factor package, known as ML (Micro Leadframe).

Essence

The essence of this microcontroller lies in its ability to provide efficient and reliable control and processing capabilities in a compact package.

Packaging/Quantity

The PIC18F46K80-E/ML is typically packaged in reels or tubes, with a quantity of 1000 units per package.

Specifications

  • Microcontroller Family: PIC18
  • Core Size: 8-bit
  • Program Memory Size: 64KB
  • RAM Size: 3.8KB
  • Number of I/O Pins: 36
  • Operating Voltage Range: 2.0V to 5.5V
  • Maximum Clock Frequency: 64 MHz
  • Communication Interfaces: UART, SPI, I2C
  • Analog-to-Digital Converter (ADC) Resolution: 10-bit
  • Timers/Counters: 4
  • PWM Channels: 5
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The PIC18F46K80-E/ML has a total of 36 pins, each serving a specific purpose. The pin configuration is as follows:

  1. VDD - Power supply voltage
  2. VSS - Ground
  3. RA0 - General-purpose I/O pin
  4. RA1 - General-purpose I/O pin
  5. RA2 - General-purpose I/O pin
  6. RA3 - General-purpose I/O pin
  7. RA4 - General-purpose I/O pin
  8. RA5 - General-purpose I/O pin
  9. MCLR - Master Clear input
  10. VREF- - Reference voltage for ADC
  11. AN0 - Analog input channel 0
  12. AN1 - Analog input channel 1
  13. AN2 - Analog input channel 2
  14. AN3 - Analog input channel 3
  15. AN4 - Analog input channel 4
  16. AN5 - Analog input channel 5
  17. AN6 - Analog input channel 6
  18. AN7 - Analog input channel 7
  19. RB0 - General-purpose I/O pin
  20. RB1 - General-purpose I/O pin
  21. RB2 - General-purpose I/O pin
  22. RB3 - General-purpose I/O pin
  23. RB4 - General-purpose I/O pin
  24. RB5 - General-purpose I/O pin
  25. RB6 - General-purpose I/O pin
  26. RB7 - General-purpose I/O pin
  27. RB8 - General-purpose I/O pin
  28. RB9 - General-purpose I/O pin
  29. RB10 - General-purpose I/O pin
  30. RB11 - General-purpose I/O pin
  31. RB12 - General-purpose I/O pin
  32. RB13 - General-purpose I/O pin
  33. RB14 - General-purpose I/O pin
  34. RB15 - General-purpose I/O pin
  35. VCAP - Capacitor connection for internal voltage regulator
  36. VSS - Ground

Functional Features

The PIC18F46K80-E/ML offers a range of functional features that enhance its usability and performance. Some notable features include:

  • High-speed processing capabilities
  • Flash memory for program storage and easy reprogramming
  • Integrated peripherals such as UART, SPI, and I2C for communication
  • Analog-to-Digital Converter (ADC) for precise analog measurements
  • Timers/Counters for accurate timing operations
  • Pulse Width Modulation (PWM) channels for controlling analog outputs
  • Low power consumption modes for energy efficiency
  • Enhanced security features to protect sensitive data

Advantages and Disadvantages

Advantages

  • High-performance 8-bit architecture enables efficient processing.
  • Wide operating voltage range allows flexibility in various applications.
  • Integrated peripherals simplify circuit design and reduce external component count.
  • Low power consumption extends battery life in portable devices.
  • Robust communication interfaces facilitate seamless data exchange.

Disadvantages

  • Limited program memory size may restrict the complexity of applications.
  • Limited RAM size may impose constraints on data storage and manipulation.
  • Lack of advanced features found in higher-end microcontrollers.

Working Principles

The PIC18F46K80-E/ML operates based on the principles of a typical microcontroller. It

Texniki həllərdə PIC18F46K80-E/ML tətbiqi ilə bağlı 10 ümumi sual və cavabı sadalayın

  1. Question: What is the maximum operating frequency of PIC18F46K80-E/ML?
    Answer: The maximum operating frequency of PIC18F46K80-E/ML is 64 MHz.

  2. Question: What are the key features of PIC18F46K80-E/ML?
    Answer: PIC18F46K80-E/ML features 64 KB Flash program memory, 3.8 KB RAM, and 1.5 KB EEPROM data memory.

  3. Question: Can PIC18F46K80-E/ML be used for motor control applications?
    Answer: Yes, PIC18F46K80-E/ML is suitable for motor control applications due to its integrated PWM modules and high-speed ADC.

  4. Question: Does PIC18F46K80-E/ML support communication protocols like SPI and I2C?
    Answer: Yes, PIC18F46K80-E/ML supports SPI, I2C, and UART communication protocols.

  5. Question: What is the voltage range for operating PIC18F46K80-E/ML?
    Answer: PIC18F46K80-E/ML operates within a voltage range of 2.0V to 5.5V.

  6. Question: Is PIC18F46K80-E/ML suitable for battery-powered applications?
    Answer: Yes, PIC18F46K80-E/ML's low power consumption makes it suitable for battery-powered applications.

  7. Question: Can PIC18F46K80-E/ML be programmed using C language?
    Answer: Yes, PIC18F46K80-E/ML can be programmed using C language through MPLAB XC8 compiler.

  8. Question: What development tools are compatible with PIC18F46K80-E/ML?
    Answer: PIC18F46K80-E/ML is compatible with MPLAB X IDE and MPLAB ICD 3 in-circuit debugger.

  9. Question: Does PIC18F46K80-E/ML have built-in security features?
    Answer: Yes, PIC18F46K80-E/ML offers code protection and a programmable brown-out reset feature for enhanced security.

  10. Question: Can PIC18F46K80-E/ML be used in industrial automation applications?
    Answer: Yes, PIC18F46K80-E/ML's robust peripherals and communication capabilities make it suitable for industrial automation applications.