Microchip Technology
Şəkil təsvir ola bilər.
Məhsul təfərrüatları üçün spesifikasiyalara baxın.
PIC18LF26K42-I/ML
Ətraflı Baxın Məlumat vərəqləri

PIC18LF26K42-I/ML

Product Overview

Category

The PIC18LF26K42-I/ML belongs to the category of microcontrollers.

Use

This microcontroller is commonly used in various electronic devices and embedded systems for controlling and processing data.

Characteristics

  • High-performance 8-bit architecture
  • Low power consumption
  • Enhanced Core Independent Peripherals (CIPs)
  • Wide operating voltage range
  • Large program memory capacity
  • Multiple communication interfaces

Package

The PIC18LF26K42-I/ML is available in a small form factor package, known as QFN-28.

Essence

The essence of this microcontroller lies in its ability to provide efficient and reliable control and processing capabilities for a wide range of applications.

Packaging/Quantity

The PIC18LF26K42-I/ML is typically packaged in reels containing a quantity of 250 units.

Specifications

  • Microcontroller Family: PIC18
  • CPU Speed: Up to 64 MHz
  • Program Memory Size: 32 KB
  • RAM Size: 2 KB
  • Number of I/O Pins: 25
  • ADC Resolution: 10-bit
  • Operating Voltage Range: 1.8V to 5.5V
  • Communication Interfaces: UART, SPI, I2C
  • Timers: 4 x 8-bit, 1 x 16-bit

Detailed Pin Configuration

The PIC18LF26K42-I/ML has a total of 28 pins. The pin configuration is as follows:

  1. VDD - Power supply voltage
  2. RA0 - General-purpose I/O pin
  3. RA1 - General-purpose I/O pin
  4. RA2 - General-purpose I/O pin
  5. RA3 - General-purpose I/O pin
  6. RA4 - General-purpose I/O pin
  7. RA5 - General-purpose I/O pin
  8. VSS - Ground
  9. RC0 - General-purpose I/O pin
  10. RC1 - General-purpose I/O pin
  11. RC2 - General-purpose I/O pin
  12. RC3 - General-purpose I/O pin
  13. RC4 - General-purpose I/O pin
  14. RC5 - General-purpose I/O pin
  15. RC6 - General-purpose I/O pin
  16. RC7 - General-purpose I/O pin
  17. OSC1 - Oscillator input
  18. OSC2 - Oscillator output
  19. RB0 - General-purpose I/O pin
  20. RB1 - General-purpose I/O pin
  21. RB2 - General-purpose I/O pin
  22. RB3 - General-purpose I/O pin
  23. RB4 - General-purpose I/O pin
  24. RB5 - General-purpose I/O pin
  25. RB6 - General-purpose I/O pin
  26. RB7 - General-purpose I/O pin
  27. MCLR - Master Clear (Reset) input
  28. VDD - Power supply voltage

Functional Features

The PIC18LF26K42-I/ML microcontroller offers several functional features, including:

  • Enhanced Core Independent Peripherals (CIPs) for autonomous operation
  • High-speed and efficient processing capabilities
  • Multiple communication interfaces for seamless connectivity
  • Flexible I/O pins for interfacing with external devices
  • Integrated analog-to-digital converter (ADC) for precise measurements
  • Timers for accurate timing control
  • Low power consumption for energy-efficient applications

Advantages and Disadvantages

Advantages

  • High-performance architecture enables fast and efficient processing.
  • Wide operating voltage range allows for versatile applications.
  • Enhanced Core Independent Peripherals (CIPs) simplify system design and reduce software overhead.
  • Large program memory capacity accommodates complex applications.
  • Multiple communication interfaces facilitate seamless integration with other devices.

Disadvantages

  • Limited RAM size may restrict the complexity of certain applications.
  • Small form factor package may require additional considerations for heat dissipation.
  • Higher cost compared to some other microcontrollers in the market.

Working Principles

The PIC18LF26K42-I/ML operates based on the principles of a typical microcontroller. It executes instructions stored in its program memory, interacts with external devices through its I/O pins, and utilizes its integrated peripherals to perform various tasks. The microcontroller's central processing unit (CPU) coordinates these operations, ensuring proper control and data processing.

Detailed Application Field Plans

The PIC18LF26K42-I/ML finds applications in various fields, including:

  1. Industrial Automation: Control systems, motor drives, and monitoring devices.
  2. Consumer Electronics: Home appliances, gaming consoles, and wearable devices.
  3. Automotive: Engine control units, dashboard displays, and infotainment systems.
  4. Internet of Things (IoT): Smart home devices, environmental sensors, and remote monitoring systems.

Texniki həllərdə PIC18LF26K42-I/ML tətbiqi ilə bağlı 10 ümumi sual və cavabı sadalayın

  1. What is the maximum operating frequency of PIC18LF26K42-I/ML?
    - The maximum operating frequency of PIC18LF26K42-I/ML is 64 MHz.

  2. What are the key features of PIC18LF26K42-I/ML?
    - Some key features of PIC18LF26K42-I/ML include low power consumption, integrated peripherals, and enhanced core performance.

  3. Can PIC18LF26K42-I/ML be used in battery-powered applications?
    - Yes, PIC18LF26K42-I/ML is suitable for battery-powered applications due to its low power consumption.

  4. What communication interfaces are supported by PIC18LF26K42-I/ML?
    - PIC18LF26K42-I/ML supports communication interfaces such as SPI, I2C, and UART.

  5. Is PIC18LF26K42-I/ML compatible with common development tools?
    - Yes, PIC18LF26K42-I/ML is compatible with popular development tools such as MPLAB X IDE and MPLAB Code Configurator.

  6. What are the available memory options for PIC18LF26K42-I/ML?
    - PIC18LF26K42-I/ML offers various memory options including Flash program memory, EEPROM data memory, and SRAM.

  7. Can PIC18LF26K42-I/ML be used in industrial control applications?
    - Yes, PIC18LF26K42-I/ML is suitable for industrial control applications due to its robust design and integrated peripherals.

  8. Are there any application notes or reference designs available for PIC18LF26K42-I/ML?
    - Yes, Microchip provides application notes and reference designs to assist with the implementation of PIC18LF26K42-I/ML in technical solutions.

  9. What is the temperature range for operating PIC18LF26K42-I/ML?
    - PIC18LF26K42-I/ML has an extended temperature range from -40°C to 125°C, making it suitable for a wide range of environments.

  10. Can PIC18LF26K42-I/ML be used in automotive electronics?
    - Yes, PIC18LF26K42-I/ML is designed to meet the requirements for automotive electronics applications, including temperature and voltage specifications.