Microchip Technology
Şəkil təsvir ola bilər.
Məhsul təfərrüatları üçün spesifikasiyalara baxın.
PIC24EP128MC202-I/SP
Ətraflı Baxın Məlumat vərəqləri

PIC24EP128MC202-I/SP

Product Overview

Category

The PIC24EP128MC202-I/SP belongs to the category of microcontrollers.

Use

This microcontroller is commonly used in various electronic devices and systems for control and processing purposes.

Characteristics

  • High-performance 16-bit architecture
  • Enhanced core with advanced peripherals
  • Large memory capacity
  • Low power consumption
  • Wide operating voltage range

Package

The PIC24EP128MC202-I/SP is available in a small outline, 28-pin plastic dual inline package (DIP).

Essence

The essence of this microcontroller lies in its ability to provide efficient control and processing capabilities for a wide range of applications.

Packaging/Quantity

The PIC24EP128MC202-I/SP is typically packaged in reels or tubes, with a quantity of 100 units per package.

Specifications

  • Microcontroller Family: PIC24EP
  • Core Size: 16-bit
  • Program Memory Size: 128 KB
  • RAM Size: 8 KB
  • Number of I/O Pins: 23
  • Operating Voltage Range: 2.3V to 3.6V
  • Maximum Speed: 70 MHz
  • Data Bus Width: 16-bit
  • ADC Resolution: 10-bit
  • Communication Interfaces: UART, SPI, I2C, USB

Detailed Pin Configuration

The PIC24EP128MC202-I/SP has a total of 28 pins, each serving a specific purpose. Here is a detailed pin configuration:

  1. VDD - Power supply voltage
  2. VSS - Ground
  3. RA0 - General-purpose I/O pin
  4. RA1 - General-purpose I/O pin
  5. RA2 - General-purpose I/O pin
  6. RA3 - General-purpose I/O pin
  7. RA4 - General-purpose I/O pin
  8. RA5 - General-purpose I/O pin
  9. RB0 - General-purpose I/O pin
  10. RB1 - General-purpose I/O pin
  11. RB2 - General-purpose I/O pin
  12. RB3 - General-purpose I/O pin
  13. RB4 - General-purpose I/O pin
  14. RB5 - General-purpose I/O pin
  15. RB6 - General-purpose I/O pin
  16. RB7 - General-purpose I/O pin
  17. RB8 - General-purpose I/O pin
  18. RB9 - General-purpose I/O pin
  19. RB10 - General-purpose I/O pin
  20. RB11 - General-purpose I/O pin
  21. RB12 - General-purpose I/O pin
  22. RB13 - General-purpose I/O pin
  23. RB14 - General-purpose I/O pin
  24. RB15 - General-purpose I/O pin
  25. VCAP - Capacitor connection for internal voltage regulator
  26. VSS - Ground
  27. OSC1/CLKI - Oscillator input/clock input
  28. OSC2/CLKO - Oscillator output/clock output

Functional Features

  • High-speed processing capabilities
  • Enhanced core with advanced peripherals for efficient control
  • Ample memory capacity for storing program code and data
  • Low power consumption for energy-efficient operation
  • Wide operating voltage range for flexibility in various applications
  • Multiple communication interfaces for seamless integration with other devices

Advantages and Disadvantages

Advantages

  • High-performance 16-bit architecture enables efficient processing.
  • Enhanced core and advanced peripherals provide enhanced control capabilities.
  • Ample memory capacity allows for complex program execution.
  • Low power consumption prolongs battery life in portable applications.
  • Wide operating voltage range ensures compatibility with different power sources.

Disadvantages

  • Limited number of I/O pins may restrict the connectivity options in complex systems.
  • Higher cost compared to lower-end microcontrollers with similar specifications.

Working Principles

The PIC24EP128MC202-I/SP operates based on the principles of digital logic and microcontroller architecture. It executes instructions stored in its program memory, interacts with peripherals, and processes data according to the program code. The microcontroller's core performs arithmetic, logical, and control operations, while the peripherals facilitate communication, input/output, and other specific functions.

Detailed Application Field Plans

The PIC24EP128MC202-I/SP finds applications in various fields, including but not limited to:

  1. Industrial automation: Control systems for manufacturing processes, robotics, and machinery.
  2. Consumer electronics: Home appliances, gaming consoles, and audio/video equipment.
  3. Automotive: Engine management systems, dashboard controls, and infotainment systems.
  4. Medical devices: Patient monitoring systems, diagnostic equipment, and implantable devices.
  5. Internet of Things (IoT): Smart home automation, wearable devices, and sensor networks.

Detailed and Complete Alternative Models

  • PIC24EP64MC202

Texniki həllərdə PIC24EP128MC202-I/SP tətbiqi ilə bağlı 10 ümumi sual və cavabı sadalayın

  1. What is the maximum operating frequency of PIC24EP128MC202-I/SP?

    • The maximum operating frequency of PIC24EP128MC202-I/SP is 70 MHz.

  2. What are the key features of PIC24EP128MC202-I/SP?

    • PIC24EP128MC202-I/SP features a 16-bit microcontroller, 128 KB of flash memory, 8 KB of RAM, and various communication interfaces.

  3. Can PIC24EP128MC202-I/SP be used in industrial control applications?

    • Yes, PIC24EP128MC202-I/SP is suitable for industrial control applications due to its robust features and performance.

  4. Does PIC24EP128MC202-I/SP support communication protocols like SPI and I2C?

    • Yes, PIC24EP128MC202-I/SP supports popular communication protocols such as SPI and I2C.

  5. What development tools are available for programming PIC24EP128MC202-I/SP?

    • Development tools such as MPLAB X IDE and MPLAB XC16 Compiler can be used for programming PIC24EP128MC202-I/SP.

  6. Is PIC24EP128MC202-I/SP suitable for low-power applications?

    • Yes, PIC24EP128MC202-I/SP offers low-power modes and features, making it suitable for low-power applications.

  7. What are the recommended operating conditions for PIC24EP128MC202-I/SP?

    • The recommended operating voltage range for PIC24EP128MC202-I/SP is 2.2V to 3.6V, with a typical operating temperature range of -40°C to 85°C.

  8. Can PIC24EP128MC202-I/SP be used in motor control applications?

    • Yes, PIC24EP128MC202-I/SP is well-suited for motor control applications due to its high-performance capabilities.

  9. Are there any application notes or reference designs available for PIC24EP128MC202-I/SP?

    • Yes, Microchip provides application notes and reference designs to assist in the implementation of PIC24EP128MC202-I/SP in various technical solutions.

  10. What are the available peripherals on PIC24EP128MC202-I/SP?

    • PIC24EP128MC202-I/SP features multiple timers, PWM modules, ADC channels, UART, and more, providing a wide range of peripheral options for technical solutions.