PIC24FJ64GA106-I/MR

Product Overview

Category

The PIC24FJ64GA106-I/MR belongs to the category of microcontrollers.

Use

This microcontroller is commonly used in various electronic devices and embedded systems for controlling and processing data.

Characteristics

• High-performance 16-bit architecture
• Low power consumption
• Large memory capacity
• Integrated peripherals for enhanced functionality
• Wide operating voltage range
• Robust communication interfaces

Package

The PIC24FJ64GA106-I/MR is available in a small form factor package, allowing for easy integration into compact designs.

Essence

The essence of this microcontroller lies in its ability to provide efficient and reliable control and processing capabilities for a wide range of applications.

Packaging/Quantity

The PIC24FJ64GA106-I/MR is typically packaged in reels or tubes, with a quantity of 250 units per reel/tube.

Specifications

• Microcontroller Family: PIC24F
• Core Size: 16-bit
• Program Memory Size: 64 KB
• RAM Size: 8 KB
• Number of I/O Pins: 35
• Operating Voltage Range: 2.0V to 3.6V
• Maximum Speed: 32 MHz
• Communication Interfaces: UART, SPI, I2C
• Analog-to-Digital Converter (ADC) Resolution: 10-bit
• Timers/Counters: 4
• Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The PIC24FJ64GA106-I/MR has a total of 35 pins, each serving a specific purpose. The pin configuration is as follows:

1. VDD - Power supply voltage
2. VSS - Ground
3. RA0 - General-purpose I/O pin
4. RA1 - General-purpose I/O pin
5. RA2 - General-purpose I/O pin
6. RA3 - General-purpose I/O pin
7. RA4 - General-purpose I/O pin
8. RA5 - General-purpose I/O pin
9. MCLR - Master Clear input
10. RB0 - General-purpose I/O pin
11. RB1 - General-purpose I/O pin
12. RB2 - General-purpose I/O pin
13. RB3 - General-purpose I/O pin
14. RB4 - General-purpose I/O pin
15. RB5 - General-purpose I/O pin
16. RB6 - General-purpose I/O pin
17. RB7 - General-purpose I/O pin
18. RB8 - General-purpose I/O pin
19. RB9 - General-purpose I/O pin
20. RB10 - General-purpose I/O pin
21. RB11 - General-purpose I/O pin
22. RB12 - General-purpose I/O pin
23. RB13 - General-purpose I/O pin
24. RB14 - General-purpose I/O pin
25. RB15 - General-purpose I/O pin
26. VCAP - Capacitor connection for internal voltage regulator
27. AVDD - Analog power supply voltage
28. AVSS - Analog ground
29. AN0 - Analog input channel 0
30. AN1 - Analog input channel 1
31. AN2 - Analog input channel 2
32. AN3 - Analog input channel 3
33. AN4 - Analog input channel 4
34. AN5 - Analog input channel 5
35. VREF+ - Positive reference voltage for ADC

Functional Features

The PIC24FJ64GA106-I/MR offers a range of functional features, including:

• High-speed processing capabilities
• Flexible and configurable I/O pins
• Integrated analog-to-digital converter (ADC)
• Enhanced communication interfaces for data transfer
• Timers and counters for precise timing operations
• Low power consumption modes for energy efficiency
• Built-in security features for data protection

Advantages and Disadvantages

Advantages

• High-performance 16-bit architecture enables efficient processing of complex tasks.
• Large memory capacity allows for the implementation of sophisticated algorithms.
• Integrated peripherals reduce the need for external components, saving cost and board space.
• Wide operating voltage range ensures compatibility with various power sources.
• Robust communication interfaces facilitate seamless data exchange with other devices.

Disadvantages

• Limited number of I/O pins may restrict the connectivity options in certain applications.
• Higher power consumption compared to some low-power microcontrollers.
• Relatively higher cost compared to lower-end microcontrollers.

Working Principles

The PIC24FJ64GA106-I/MR operates based on the principles of digital logic and microcontroller architecture. It executes instructions stored in its program memory to perform specific tasks. The microcontroller interacts with external devices through its I/O pins and communication interfaces, enabling data input,