PIC24FV16KM204-I/PT

Overview

• Category: Microcontroller
• Use: Embedded systems, control applications
• Characteristics:
  • High performance
  • Low power consumption
  • Large memory capacity
  • Rich peripheral integration
• Package: TQFP (Thin Quad Flat Pack)
• Essence: Advanced microcontroller for various applications
• Packaging/Quantity: Tape and reel, 1000 units per reel

Specifications

• Architecture: 16-bit
• CPU Speed: Up to 32 MHz
• Flash Memory: 16 KB
• RAM: 2 KB
• Operating Voltage Range: 2.3V to 5.5V
• Digital I/O Pins: 28
• Analog Input Channels: 12
• Communication Interfaces: UART, SPI, I2C
• Timers: 4 x 16-bit, 1 x 32-bit
• ADC Resolution: 10-bit
• PWM Channels: 6
• Operating Temperature Range: -40°C to +85°C

Pin Configuration

The PIC24FV16KM204-I/PT microcontroller has a total of 44 pins. The pin configuration is as follows:

• Pin 1: VDD (Power Supply)
• Pin 2: VSS (Ground)
• Pin 3: RA0 (Analog/Digital I/O)
• Pin 4: RA1 (Analog/Digital I/O)
• Pin 5: RA2 (Analog/Digital I/O)
• ...
• Pin 44: RB15 (Digital I/O)

For the complete pinout diagram, refer to the datasheet.

Functional Features

• High-performance CPU with efficient instruction set
• Integrated peripherals for enhanced functionality
• Flexible communication interfaces for seamless connectivity
• Rich analog capabilities for precise measurements
• Advanced timers and PWM channels for accurate timing control
• Low-power modes for energy-efficient operation

Advantages

• High processing power for demanding applications
• Ample memory capacity for storing complex programs
• Versatile peripheral integration reduces external component count
• Wide operating voltage range allows for diverse power supply options
• Robust packaging ensures durability in various environments

Disadvantages

• Limited number of I/O pins may restrict connectivity options in some designs
• Higher cost compared to lower-end microcontrollers with similar features
• Steeper learning curve due to the complexity of the architecture

Working Principles

The PIC24FV16KM204-I/PT microcontroller operates based on the Harvard architecture, where program memory and data memory are separate. It executes instructions fetched from the Flash memory and performs calculations using the CPU and integrated peripherals. The microcontroller communicates with external devices through its communication interfaces and interacts with the physical world through its I/O pins.

Application Field Plans

The PIC24FV16KM204-I/PT microcontroller finds applications in various fields, including:

1. Industrial automation: Control systems, motor control, monitoring devices.
2. Consumer electronics: Home appliances, audio/video equipment, gaming consoles.
3. Automotive: Engine management, dashboard displays, infotainment systems.
4. Medical devices: Patient monitoring, diagnostic equipment, wearable health trackers.
5. Internet of Things (IoT): Smart home automation, sensor networks, connected devices.

Alternative Models

If the PIC24FV16KM204-I/PT does not meet specific requirements, alternative microcontrollers with similar capabilities include:

1. PIC24FV32KA302
2. PIC24FJ64GA704
3. PIC24HJ128GP502
4. PIC24EP256GU810

These alternatives offer varying memory capacities, pin counts, and additional features to cater to different application needs.

In conclusion, the PIC24FV16KM204-I/PT microcontroller is a high-performance 16-bit microcontroller with rich peripheral integration and versatile applications. Its advanced features, robust packaging, and wide operating voltage range make it suitable for various control and embedded systems projects.