Microsemi Corporation
Şəkil təsvir ola bilər.
Məhsul təfərrüatları üçün spesifikasiyalara baxın.
1N1199C
Ətraflı Baxın Məlumat vərəqləri

1N1199C Diode

Product Information

Category:

The 1N1199C diode belongs to the category of semiconductor devices.

Use:

It is commonly used as a rectifier in electronic circuits to convert alternating current (AC) to direct current (DC).

Characteristics:

  • Forward Voltage Drop: Typically around 0.7V
  • Reverse Leakage Current: Low leakage current at reverse bias
  • Operating Temperature Range: -65°C to +175°C

Package:

The 1N1199C diode is typically available in a DO-35 glass axial package.

Packaging/Quantity:

It is usually packaged in reels or tubes, with quantities varying based on manufacturer specifications.

Specifications

  • Maximum Forward Voltage: 1V
  • Maximum Reverse Voltage: 75V
  • Maximum Average Rectified Current: 150mA
  • Maximum Peak Surge Current: 2A

Detailed Pin Configuration

The 1N1199C diode has two leads, an anode and a cathode. The anode is typically marked with a band or other indicator on the body of the diode.

Functional Features

The 1N1199C diode acts as a one-way valve for electric current, allowing current to flow in only one direction.

Advantages and Disadvantages

Advantages

  • Low forward voltage drop
  • Low reverse leakage current
  • Wide operating temperature range

Disadvantages

  • Limited maximum average rectified current
  • Moderate maximum reverse voltage

Working Principles

When the diode is forward-biased, it allows current to flow through it with minimal resistance. When reverse-biased, it blocks the flow of current, except for a small leakage current.

Detailed Application Field Plans

The 1N1199C diode finds applications in various electronic circuits, including: - Power supplies - Signal demodulation - Overvoltage protection

Detailed and Complete Alternative Models

Some alternative models to the 1N1199C diode include: - 1N4148 - 1N4001 - 1N5819

This information provides a comprehensive overview of the 1N1199C diode, covering its basic information, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.

Texniki həllərdə 1N1199C tətbiqi ilə bağlı 10 ümumi sual və cavabı sadalayın

  1. What is 1N1199C?

    • 1N1199C is a silicon rectifier diode commonly used in electronic circuits for converting alternating current (AC) to direct current (DC).

  2. What are the key specifications of 1N1199C?

    • The 1N1199C diode has a maximum repetitive peak reverse voltage of 1000V, a maximum average forward current of 1A, and a forward voltage drop of around 1V.

  3. How is 1N1199C typically used in technical solutions?

    • 1N1199C is often used in power supply circuits, voltage regulation, and signal demodulation applications due to its ability to convert AC to DC and its low forward voltage drop.

  4. What are the common circuit configurations for 1N1199C?

    • The 1N1199C can be used in half-wave and full-wave rectifier circuits, as well as in voltage multiplier circuits to generate higher DC voltages.

  5. What are the temperature and storage considerations for 1N1199C?

    • The operating temperature range for 1N1199C is typically between -65°C to +175°C, and it should be stored in a dry environment with temperatures ranging from -65°C to +175°C.

  6. Are there any typical failure modes associated with 1N1199C?

    • Common failure modes include overvoltage breakdown, excessive forward current causing thermal runaway, and physical damage due to mishandling.

  7. Can 1N1199C be used in high-frequency applications?

    • While 1N1199C can function at moderate frequencies, it may not be suitable for very high-frequency applications due to its inherent capacitance and recovery time.

  8. What are the packaging options available for 1N1199C?

    • 1N1199C is commonly available in axial-lead glass packages and surface-mount packages, providing flexibility for different circuit designs.

  9. Are there any recommended alternative diodes to 1N1199C?

    • Depending on specific requirements, alternatives such as 1N400x series diodes or Schottky diodes may be considered for similar applications.

  10. What precautions should be taken when soldering 1N1199C?

    • Proper heat management during soldering is crucial to prevent damage to the diode. Excessive heat can degrade the diode's performance or cause internal damage.