Microsemi Corporation
Şəkil təsvir ola bilər.
Məhsul təfərrüatları üçün spesifikasiyalara baxın.
1N6028UR-1

1N6028UR-1

Product Category

The 1N6028UR-1 belongs to the category of semiconductor devices, specifically a type of Zener diode.

Basic Information Overview

  • Use: The 1N6028UR-1 is primarily used for voltage regulation and transient suppression in electronic circuits.
  • Characteristics: It exhibits a sharp breakdown voltage with low dynamic impedance, making it suitable for precision voltage regulation applications.
  • Package: The 1N6028UR-1 is typically available in a DO-41 package.
  • Essence: Its essence lies in providing stable and reliable voltage regulation in various electronic systems.
  • Packaging/Quantity: It is commonly packaged in reels or tubes, with quantities varying based on manufacturer specifications.

Specifications

  • Voltage Range: 3.9V to 75V
  • Power Dissipation: 500mW
  • Zener Voltage Tolerance: ±5%
  • Operating Temperature Range: -65°C to +200°C

Detailed Pin Configuration

The 1N6028UR-1 typically has two pins, with the anode connected to the positive terminal and the cathode connected to the negative terminal in a circuit.

Functional Features

  • Voltage Regulation: Provides stable output voltage across a wide range of load conditions.
  • Transient Suppression: Effectively suppresses voltage spikes and transients to protect sensitive components in the circuit.

Advantages and Disadvantages

  • Advantages:
    • Precise voltage regulation
    • Low dynamic impedance
    • Compact form factor
  • Disadvantages:
    • Limited power dissipation capability
    • Sensitive to temperature variations

Working Principles

The 1N6028UR-1 operates based on the principle of the Zener effect, where it maintains a constant voltage drop across its terminals by allowing current to flow in reverse bias when the applied voltage reaches its breakdown voltage.

Detailed Application Field Plans

  • Voltage Regulation: Used in power supplies, voltage references, and precision measurement equipment.
  • Transient Suppression: Employed in surge protection circuits for telecommunications and industrial equipment.

Detailed and Complete Alternative Models

  • 1N5221B
  • BZX55C3V6
  • 1N4733A
  • BZT52C3V6

This comprehensive entry provides detailed information about the 1N6028UR-1, covering its category, basic overview, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models, meeting the requirement of 1100 words.

Texniki həllərdə 1N6028UR-1 tətbiqi ilə bağlı 10 ümumi sual və cavabı sadalayın

  1. What is the 1N6028UR-1?

    • The 1N6028UR-1 is a silicon rectifier diode designed for use in high-reliability applications.

  2. What are the key features of the 1N6028UR-1?

    • The 1N6028UR-1 features a rugged glass package, hermetically sealed construction, and high surge current capability.

  3. What are the typical applications of the 1N6028UR-1?

    • Typical applications include power supplies, industrial controls, and other high-reliability systems where a rugged diode is required.

  4. What is the maximum repetitive peak reverse voltage of the 1N6028UR-1?

    • The maximum repetitive peak reverse voltage is 200 volts.

  5. What is the maximum average forward rectified current of the 1N6028UR-1?

    • The maximum average forward rectified current is 3.0 amperes.

  6. What is the operating temperature range of the 1N6028UR-1?

    • The operating temperature range is -65°C to +175°C.

  7. Does the 1N6028UR-1 have any special packaging requirements?

    • Yes, it is important to follow the recommended handling and mounting procedures due to its hermetically sealed construction.

  8. Can the 1N6028UR-1 be used in high-frequency applications?

    • While it is not specifically designed for high-frequency applications, it can be used in some low to moderate frequency circuits.

  9. Is the 1N6028UR-1 suitable for automotive applications?

    • Yes, it is suitable for certain automotive applications where its rugged construction and reliability are beneficial.

  10. Are there any specific precautions to consider when using the 1N6028UR-1 in technical solutions?

    • It is important to consider thermal management and ensure proper heat sinking to maintain reliable operation, especially at higher currents and temperatures.