Microsemi Corporation
Şəkil təsvir ola bilər.
Məhsul təfərrüatları üçün spesifikasiyalara baxın.
JAN1N5551
Ətraflı Baxın Məlumat vərəqləri

JAN1N5551

Product Overview

Category

The JAN1N5551 belongs to the category of semiconductor diodes.

Use

It is commonly used in electronic circuits for rectification, voltage regulation, and signal demodulation.

Characteristics

  • Forward voltage drop: 0.7V
  • Reverse voltage: 200V
  • Maximum forward current: 150mA
  • Fast switching speed

Package

The JAN1N5551 is typically available in a DO-35 glass package.

Essence

This diode is essential for converting alternating current (AC) to direct current (DC) and for protecting circuits from reverse voltage.

Packaging/Quantity

The JAN1N5551 is usually packaged in reels or tubes, with quantities varying based on manufacturer specifications.

Specifications

  • Peak repetitive reverse voltage: 200V
  • Average rectified output current: 150mA
  • Non-repetitive peak surge current: 2A
  • Operating temperature range: -65°C to +175°C

Detailed Pin Configuration

The JAN1N5551 has two pins, anode, and cathode, with the anode being the positive terminal and the cathode being the negative terminal.

Functional Features

  • High reliability
  • Low leakage current
  • Fast recovery time

Advantages and Disadvantages

Advantages

  • High voltage capability
  • Fast switching speed
  • Low forward voltage drop

Disadvantages

  • Limited maximum forward current
  • Sensitive to temperature variations

Working Principles

The JAN1N5551 operates based on the principle of creating a one-way flow of current when forward-biased and blocking the flow of current when reverse-biased.

Detailed Application Field Plans

The JAN1N5551 is widely used in: - Power supply units - Voltage regulators - Signal demodulation circuits - Overvoltage protection circuits

Detailed and Complete Alternative Models

Some alternative models to the JAN1N5551 include: - 1N4001 - 1N4148 - 1N5819 - 1N5399

In conclusion, the JAN1N5551 semiconductor diode is a crucial component in electronic circuits, providing reliable rectification and voltage regulation. Its high voltage capability and fast switching speed make it suitable for various applications, although its limited maximum forward current and sensitivity to temperature variations should be considered in circuit design.

[Word count: 314]

Texniki həllərdə JAN1N5551 tətbiqi ilə bağlı 10 ümumi sual və cavabı sadalayın

Sure, here are 10 common questions and answers related to the application of JAN1N5551 in technical solutions:

  1. What is the voltage rating of JAN1N5551?

    • The voltage rating of JAN1N5551 is typically 200 volts.

  2. What is the maximum forward current for JAN1N5551?

    • The maximum forward current for JAN1N5551 is usually around 150 mA.

  3. Can JAN1N5551 be used in high-temperature environments?

    • Yes, JAN1N5551 is designed to operate in high-temperature environments and can withstand temperatures up to 175°C.

  4. What type of diode is JAN1N5551?

    • JAN1N5551 is a general-purpose silicon rectifier diode.

  5. What are the typical applications of JAN1N5551?

    • Typical applications of JAN1N5551 include power supply circuits, rectification, and voltage regulation.

  6. Does JAN1N5551 have fast switching capabilities?

    • Yes, JAN1N5551 has fast switching characteristics, making it suitable for high-frequency applications.

  7. Is JAN1N5551 suitable for use in surge protection circuits?

    • Yes, JAN1N5551 is often used in surge protection circuits due to its robustness and fast response to transient overvoltage conditions.

  8. What is the reverse recovery time of JAN1N5551?

    • The reverse recovery time of JAN1N5551 is typically in the range of 4 to 8 nanoseconds.

  9. Can JAN1N5551 be used in low-power applications?

    • Yes, JAN1N5551 can be used in low-power applications due to its low forward voltage drop.

  10. Are there any specific precautions to consider when using JAN1N5551 in circuit designs?

    • It's important to consider thermal management due to the potential for heat dissipation, especially in high-current applications. Additionally, proper voltage and current ratings should be observed to ensure reliable performance.

I hope these questions and answers are helpful! Let me know if you need further assistance.