Microsemi Corporation
Şəkil təsvir ola bilər.
Məhsul təfərrüatları üçün spesifikasiyalara baxın.
JANTX1N4458
Ətraflı Baxın Məlumat vərəqləri

JANTX1N4458

Product Overview

Category

The JANTX1N4458 is a high-reliability, military-grade silicon rectifier diode.

Use

It is commonly used in applications where high reliability and performance are critical, such as aerospace, defense, and other demanding environments.

Characteristics

  • High-reliability
  • Military-grade
  • Silicon rectifier diode

Package

The JANTX1N4458 is typically available in a DO-41 package.

Essence

The essence of the JANTX1N4458 lies in its ability to provide consistent and reliable rectification in harsh operating conditions.

Packaging/Quantity

It is usually packaged in reels or tubes, with quantities varying based on the supplier and customer requirements.

Specifications

  • Maximum Average Forward Current: 1A
  • Peak Repetitive Reverse Voltage: 200V
  • Operating Temperature Range: -65°C to +175°C
  • Forward Voltage Drop: 1.1V at 1A

Detailed Pin Configuration

The JANTX1N4458 has two pins, an anode, and a cathode. The anode is typically denoted by a longer lead or a notch on the diode body.

Functional Features

  • High reliability under extreme conditions
  • Low forward voltage drop
  • Fast reverse recovery time

Advantages

  • Suitable for high-reliability applications
  • Performs well in harsh environments
  • Low forward voltage drop minimizes power loss

Disadvantages

  • Higher cost compared to standard commercial diodes
  • Limited availability from non-military grade suppliers

Working Principles

The JANTX1N4458 operates on the principle of rectification, allowing current to flow in only one direction while blocking it in the reverse direction. This enables it to convert alternating current (AC) to direct current (DC) in electronic circuits.

Detailed Application Field Plans

The JANTX1N4458 is widely used in: - Aerospace electronics - Defense systems - Industrial equipment operating in extreme conditions

Detailed and Complete Alternative Models

Some alternative models to the JANTX1N4458 include: - JANTX1N5806 - JANTX1N5550 - JANTX1N6463

In conclusion, the JANTX1N4458 is a high-reliability silicon rectifier diode designed for use in demanding applications where consistent performance is essential. Its robust characteristics, functional features, and wide application field make it a preferred choice for critical electronic systems.

Word Count: 366

Texniki həllərdə JANTX1N4458 tətbiqi ilə bağlı 10 ümumi sual və cavabı sadalayın

  1. What is the JANTX1N4458 diode used for?

    • The JANTX1N4458 diode is commonly used for voltage regulation, signal processing, and protection in various technical solutions.

  2. What are the key specifications of the JANTX1N4458 diode?

    • The JANTX1N4458 diode is a silicon switching diode with a maximum repetitive peak reverse voltage of 200V and a forward current of 150mA.

  3. How does the JANTX1N4458 diode perform in voltage regulation applications?

    • The JANTX1N4458 diode can be used in voltage regulation circuits to maintain a stable output voltage by effectively clamping or limiting the voltage spikes.

  4. Can the JANTX1N4458 diode be used for signal processing?

    • Yes, the JANTX1N4458 diode is suitable for signal processing applications such as waveform shaping and frequency multiplication due to its fast switching characteristics.

  5. What are the typical applications where the JANTX1N4458 diode provides protection?

    • The JANTX1N4458 diode is often used for overvoltage protection in electronic circuits, protecting sensitive components from voltage surges and transients.

  6. What is the forward voltage drop of the JANTX1N4458 diode?

    • The forward voltage drop of the JANTX1N4458 diode is typically around 1V at a forward current of 10mA.

  7. Is the JANTX1N4458 diode suitable for high-frequency applications?

    • Yes, the JANTX1N4458 diode's fast switching speed makes it suitable for high-frequency applications such as RF circuits and microwave systems.

  8. What are the temperature considerations for the JANTX1N4458 diode?

    • The JANTX1N4458 diode has a wide operating temperature range, typically from -65°C to 175°C, making it suitable for various environmental conditions.

  9. Can the JANTX1N4458 diode be used in rectification circuits?

    • While it is primarily a switching diode, the JANTX1N4458 diode can be used for low-power rectification applications due to its low forward voltage drop.

  10. Are there any reliability considerations when using the JANTX1N4458 diode in technical solutions?

    • The JANTX1N4458 diode is designed for high-reliability applications and is manufactured to meet stringent military and aerospace standards, ensuring long-term performance and durability.