Məhsul təfərrüatları üçün spesifikasiyalara baxın.
JANTX1N4616-1
Product Overview
Category
The JANTX1N4616-1 belongs to the category of semiconductor devices, specifically a Zener diode.
Use
It is commonly used for voltage regulation and transient suppression in electronic circuits.
Characteristics
- Voltage regulation capability
- High reliability
- Low leakage current
- Fast response time
Package
The JANTX1N4616-1 is typically available in a glass axial-lead package.
Essence
The essence of the JANTX1N4616-1 lies in its ability to maintain a constant voltage across its terminals, making it suitable for various electronic applications.
Packaging/Quantity
It is usually packaged in reels or tubes, with quantities varying based on manufacturer specifications.
Specifications
- Zener Voltage: [Insert value]
- Power Dissipation: [Insert value]
- Maximum Forward Voltage: [Insert value]
- Operating Temperature Range: [Insert range]
Detailed Pin Configuration
The JANTX1N4616-1 has a standard axial-lead configuration with two leads, one connected to the anode and the other to the cathode.
Functional Features
- Precise voltage regulation
- Protection against voltage spikes
- Low impedance at operating voltage
Advantages
- Reliable voltage regulation
- Robust transient suppression
- Wide operating temperature range
Disadvantages
- Limited power dissipation capability
- Sensitive to reverse voltage polarity
Working Principles
The JANTX1N4616-1 operates based on the principle of the Zener effect, where it maintains a nearly constant voltage drop across its terminals when reverse-biased.
Detailed Application Field Plans
The JANTX1N4616-1 finds application in various electronic circuits, including: - Voltage regulators - Surge suppressors - Overvoltage protection circuits
Detailed and Complete Alternative Models
Some alternative models to the JANTX1N4616-1 include: - 1N4733A - BZX55C5V1 - 1N5226B
In conclusion, the JANTX1N4616-1 Zener diode offers reliable voltage regulation and transient suppression capabilities, making it a crucial component in many electronic circuits.
[Word count: 298]
Texniki həllərdə JANTX1N4616-1 tətbiqi ilə bağlı 10 ümumi sual və cavabı sadalayın
Sure, here are 10 common questions and answers related to the application of JANTX1N4616-1:
What is JANTX1N4616-1?
- JANTX1N4616-1 is a high-reliability, military-grade silicon power rectifier diode.
What are the key features of JANTX1N4616-1?
- The key features include high surge current capability, low forward voltage drop, and high reliability.
What are the typical applications of JANTX1N4616-1?
- It is commonly used in military and aerospace applications, as well as in high-reliability industrial equipment.
What is the maximum forward voltage of JANTX1N4616-1?
- The maximum forward voltage is typically around 1.1 volts at a forward current of 3 amps.
What is the maximum reverse voltage of JANTX1N4616-1?
- The maximum reverse voltage is 100 volts.
What is the operating temperature range for JANTX1N4616-1?
- The operating temperature range is typically -65°C to +175°C.
Is JANTX1N4616-1 suitable for high-frequency applications?
- No, it is not recommended for high-frequency applications due to its relatively slow recovery time.
Can JANTX1N4616-1 be used in parallel for higher current applications?
- Yes, it can be used in parallel to increase the current-carrying capacity.
Does JANTX1N4616-1 require heatsinking?
- It may require heatsinking in high-power applications to dissipate heat effectively.
Is JANTX1N4616-1 compliant with any specific military or industry standards?
- Yes, it is compliant with MIL-PRF-19500/116, which specifies the requirements for high-reliability semiconductor devices.
I hope these questions and answers are helpful! Let me know if you need further assistance.