Məhsul təfərrüatları üçün spesifikasiyalara baxın.
JANTXV1N6627
Product Overview
Category
The JANTXV1N6627 belongs to the category of semiconductor devices, specifically a Zener diode.
Use
It is commonly used for voltage regulation and protection in electronic circuits.
Characteristics
- Voltage regulation capability
- Reverse breakdown voltage stability
- Low impedance
- High reliability
Package
The JANTXV1N6627 is typically available in a DO-41 package.
Essence
The essence of the JANTXV1N6627 lies in its ability to maintain a constant voltage across its terminals when reverse biased.
Packaging/Quantity
It is usually packaged in reels or tubes, with quantities varying based on manufacturer specifications.
Specifications
- Voltage Range: 6.2V to 200V
- Power Dissipation: 500mW
- Operating Temperature Range: -65°C to +175°C
- Zener Impedance: 10Ω to 100Ω
Detailed Pin Configuration
The JANTXV1N6627 has two pins, anode, and cathode, with the anode being the positive terminal and the cathode being the negative terminal.
Functional Features
- Precise voltage regulation
- Protection against voltage spikes
- Stable operation over a wide temperature range
Advantages
- Reliable voltage regulation
- Low impedance
- Wide operating temperature range
Disadvantages
- Limited power dissipation capability
- Sensitivity to temperature fluctuations
Working Principles
When the voltage across the JANTXV1N6627 exceeds its rated breakdown voltage, it allows current to flow in the reverse direction, effectively maintaining a constant voltage drop across its terminals.
Detailed Application Field Plans
The JANTXV1N6627 is widely used in: - Power supply units - Voltage reference circuits - Overvoltage protection systems
Detailed and Complete Alternative Models
Some alternative models to the JANTXV1N6627 include: - 1N4728A - BZX55C6V2 - LM336Z-5.0
In conclusion, the JANTXV1N6627 Zener diode offers precise voltage regulation and protection, making it an essential component in various electronic circuits.
Word count: 346
Texniki həllərdə JANTXV1N6627 tətbiqi ilə bağlı 10 ümumi sual və cavabı sadalayın
What is JANTXV1N6627?
- JANTXV1N6627 is a high-reliability, military-grade silicon power rectifier diode.
What are the key specifications of JANTXV1N6627?
- The JANTXV1N6627 has a maximum repetitive reverse voltage of 200 volts, a forward current of 6 amperes, and a forward voltage drop of 1.1 volts at 3 amperes.
In what technical solutions can JANTXV1N6627 be used?
- JANTXV1N6627 can be used in power supply circuits, voltage regulation, reverse polarity protection, and general rectification applications in military and aerospace systems.
What are the temperature ratings for JANTXV1N6627?
- The JANTXV1N6627 is rated for operation over a temperature range of -65°C to +175°C.
Does JANTXV1N6627 have any special packaging requirements?
- Yes, JANTXV1N6627 is typically available in hermetically sealed glass packages to ensure reliability in harsh environments.
Are there any specific considerations for mounting JANTXV1N6627?
- It is important to follow proper soldering and mounting techniques to minimize thermal stress on the diode and ensure reliable operation.
Can JANTXV1N6627 be used in high-frequency applications?
- While JANTXV1N6627 is not specifically designed for high-frequency applications, it can be used in moderate frequency circuits with appropriate consideration for its characteristics.
What are the potential failure modes of JANTXV1N6627?
- Common failure modes include excessive reverse voltage, overcurrent conditions, and thermal overstress. Proper design and operating conditions can mitigate these risks.
Is JANTXV1N6627 compliant with any industry standards?
- Yes, JANTXV1N6627 is compliant with MIL-PRF-19500/578, which specifies the requirements for high-reliability semiconductor devices.
Where can I find detailed application notes for using JANTXV1N6627 in technical solutions?
- Detailed application notes and guidelines for using JANTXV1N6627 can be found in the manufacturer's datasheet and application-specific technical documents.