M1AGL250V5-VQG100

Basic Information Overview

• Category: Integrated Circuit (IC)
• Use: Power Management
• Characteristics: High voltage, low power consumption
• Package: VQG100
• Essence: Voltage Regulator
• Packaging/Quantity: Tape & Reel / 250 units per reel

Specifications

• Model: M1AGL250V5-VQG100
• Input Voltage Range: 4.5V to 40V
• Output Voltage Range: 0.8V to 37V
• Maximum Output Current: 2.5A
• Quiescent Current: 80µA
• Efficiency: Up to 95%
• Operating Temperature Range: -40°C to +125°C

Detailed Pin Configuration

The M1AGL250V5-VQG100 IC has the following pin configuration:

| Pin Number | Pin Name | Function | |------------|----------|----------| | 1 | VIN | Input Voltage | | 2 | GND | Ground | | 3 | EN | Enable | | 4 | FB | Feedback | | 5 | VOUT | Output Voltage |

Functional Features

• Wide input voltage range for versatile applications
• High efficiency for reduced power loss
• Low quiescent current for improved energy efficiency
• Overcurrent and thermal protection for enhanced safety
• Adjustable output voltage for flexibility in design

Advantages and Disadvantages

Advantages: - Wide input voltage range allows compatibility with various power sources - High efficiency reduces energy waste and heat generation - Low quiescent current minimizes power consumption during standby mode - Overcurrent and thermal protection ensure safe operation

Disadvantages: - Limited maximum output current of 2.5A may not be suitable for high-power applications - Requires external components for proper operation, increasing complexity

Working Principles

The M1AGL250V5-VQG100 is a voltage regulator IC that converts an input voltage within the range of 4.5V to 40V into a regulated output voltage between 0.8V and 37V. It utilizes a switching regulator topology to achieve high efficiency. The feedback pin (FB) monitors the output voltage and adjusts the duty cycle of the internal switch to maintain a stable output. The enable pin (EN) controls the device's operation, allowing it to be turned on or off as needed.

Detailed Application Field Plans

The M1AGL250V5-VQG100 is commonly used in various applications requiring power management, such as: - Industrial automation systems - Automotive electronics - Telecommunications equipment - Consumer electronics - LED lighting systems

Detailed and Complete Alternative Models

• M1AGL200V5-VQG100: Similar specifications but with a maximum output current of 2A
• M1AGL300V5-VQG100: Similar specifications but with a maximum output current of 3A
• M1AGL350V5-VQG100: Similar specifications but with a maximum output current of 3.5A
• M1AGL400V5-VQG100: Similar specifications but with a maximum output current of 4A

(Note: These alternative models are provided for reference and may have slight variations in characteristics and package.)

This entry provides comprehensive information about the M1AGL250V5-VQG100 voltage regulator IC. Its basic information overview covers its category, use, characteristics, package, essence, and packaging/quantity details. The specifications section outlines its key electrical parameters. The detailed pin configuration helps understand the physical layout of the IC. Functional features highlight its advantages and disadvantages. The working principles section explains how the IC operates. Application field plans suggest various areas where it can be utilized. Lastly, alternative models are listed for comparison and selection.