Microsemi Corporation
Şəkil təsvir ola bilər.
Məhsul təfərrüatları üçün spesifikasiyalara baxın.
MXSMBG13AE3
Ətraflı Baxın Məlumat vərəqləri

MXSMBG13AE3

Product Overview

Category: Electronic Component
Use: Voltage Regulator
Characteristics: High efficiency, low dropout voltage
Package: SOT-23
Essence: Regulates voltage for electronic devices
Packaging/Quantity: Tape & Reel, 3000 units per reel

Specifications

  • Input Voltage: 2.5V to 5.5V
  • Output Voltage: 1.2V to 3.3V
  • Dropout Voltage: 150mV at 100mA
  • Output Current: 500mA
  • Quiescent Current: 75µA
  • Operating Temperature: -40°C to 125°C

Detailed Pin Configuration

  1. VIN (Input Voltage)
  2. GND (Ground)
  3. VOUT (Output Voltage)

Functional Features

  • Low dropout voltage
  • Thermal shutdown protection
  • Short-circuit current limit
  • Reverse current protection

Advantages and Disadvantages

Advantages: - High efficiency - Wide input voltage range - Small package size

Disadvantages: - Limited output current - Sensitive to external noise

Working Principles

The MXSMBG13AE3 is a voltage regulator that maintains a stable output voltage despite fluctuations in the input voltage. It achieves this by using a feedback loop to adjust the output voltage based on the reference voltage.

Detailed Application Field Plans

The MXSMBG13AE3 is suitable for various battery-powered applications such as portable electronics, IoT devices, and handheld instruments. Its low dropout voltage and high efficiency make it ideal for prolonging battery life in these applications.

Detailed and Complete Alternative Models

  1. LM1117-3.3
  2. MCP1703T-3302E/DB

This completes the entry for MXSMBG13AE3, providing comprehensive information about its category, use, characteristics, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.

Texniki həllərdə MXSMBG13AE3 tətbiqi ilə bağlı 10 ümumi sual və cavabı sadalayın

  1. What is MXSMBG13AE3?

    • MXSMBG13AE3 is a surface mount TVS diode designed to protect sensitive electronics from voltage transients induced by lightning, inductive load switching, and electrostatic discharge.

  2. What is the maximum voltage rating of MXSMBG13AE3?

    • The maximum voltage rating of MXSMBG13AE3 is 13V.

  3. What is the peak pulse power of MXSMBG13AE3?

    • The peak pulse power of MXSMBG13AE3 is 600W.

  4. What are the typical applications of MXSMBG13AE3?

    • MXSMBG13AE3 is commonly used in telecommunications equipment, industrial control systems, and automotive electronics for surge protection.

  5. What is the operating temperature range of MXSMBG13AE3?

    • The operating temperature range of MXSMBG13AE3 is -55°C to +150°C.

  6. Does MXSMBG13AE3 meet any industry standards?

    • Yes, MXSMBG13AE3 complies with the requirements of IEC 61000-4-2 (ESD) and IEC 61000-4-5 (Surge).

  7. Can MXSMBG13AE3 be used in outdoor applications?

    • Yes, MXSMBG13AE3 is suitable for outdoor applications due to its robust construction and high surge protection capability.

  8. What is the package type of MXSMBG13AE3?

    • MXSMBG13AE3 is available in a SMB package, which is a surface mount package.

  9. Is MXSMBG13AE3 RoHS compliant?

    • Yes, MXSMBG13AE3 is compliant with the Restriction of Hazardous Substances (RoHS) directive.

  10. Are there any recommended layout guidelines for using MXSMBG13AE3 in a PCB design?

    • Yes, it is recommended to minimize the length of the traces connecting MXSMBG13AE3 to the protected circuit and to provide a low impedance path to ground. Additionally, placing the TVS diode as close as possible to the protected circuit is advisable for optimal performance.