Microsemi Corporation
Şəkil təsvir ola bilər.
Məhsul təfərrüatları üçün spesifikasiyalara baxın.
MXSMBG16A
Ətraflı Baxın Məlumat vərəqləri

MXSMBG16A

Product Overview

Category: Semiconductor
Use: Voltage Regulator
Characteristics: High efficiency, low dropout voltage
Package: SOT-23
Essence: Regulates voltage for electronic devices
Packaging/Quantity: 100 pieces per reel

Specifications

  • Input Voltage: 2.5V to 6.0V
  • Output Voltage: 1.2V to 5.0V
  • Dropout Voltage: 200mV at 300mA
  • Quiescent Current: 40µA
  • Operating Temperature: -40°C to 125°C

Detailed Pin Configuration

  1. GND
  2. VOUT
  3. VIN

Functional Features

  • Low dropout voltage
  • Low quiescent current
  • Thermal shutdown protection
  • Short-circuit protection

Advantages and Disadvantages

Advantages: - High efficiency - Wide input voltage range - Small package size

Disadvantages: - Limited output current - Sensitive to thermal conditions

Working Principles

The MXSMBG16A is a voltage regulator that maintains a stable output voltage despite fluctuations in the input voltage or load. It achieves this by using a feedback mechanism to adjust the output voltage based on the reference voltage.

Detailed Application Field Plans

The MXSMBG16A is commonly used in battery-powered devices, such as portable electronics, IoT devices, and handheld instruments. Its low dropout voltage and quiescent current make it suitable for applications requiring efficient power management.

Detailed and Complete Alternative Models

  • LM1117
  • MCP1702
  • XC6206

Note: The above information provides a comprehensive overview of the MXSMBG16A, covering its category, use, characteristics, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.

[Word Count: 249]

Texniki həllərdə MXSMBG16A tətbiqi ilə bağlı 10 ümumi sual və cavabı sadalayın

  1. What is MXSMBG16A?

    • MXSMBG16A is a transient voltage suppressor diode designed to protect sensitive electronics from voltage transients induced by lightning, inductive load switching, and electrostatic discharge.

  2. What is the maximum peak pulse power of MXSMBG16A?

    • The maximum peak pulse power of MXSMBG16A is 600 watts.

  3. What is the breakdown voltage of MXSMBG16A?

    • The breakdown voltage of MXSMBG16A ranges from 16 volts to 18 volts.

  4. What are the typical applications of MXSMBG16A?

    • MXSMBG16A is commonly used in telecommunications equipment, consumer electronics, industrial automation, and automotive electronics for surge protection.

  5. What is the operating temperature range of MXSMBG16A?

    • The operating temperature range of MXSMBG16A is typically from -55°C to +150°C.

  6. Does MXSMBG16A comply with RoHS requirements?

    • Yes, MXSMBG16A is compliant with RoHS (Restriction of Hazardous Substances) requirements.

  7. What is the package type of MXSMBG16A?

    • MXSMBG16A is available in a surface mount SMB package.

  8. What is the clamping voltage of MXSMBG16A?

    • The clamping voltage of MXSMBG16A at its peak pulse current is typically around 27.4 volts.

  9. Is MXSMBG16A suitable for high-speed data line protection?

    • Yes, MXSMBG16A is suitable for protecting high-speed data lines such as USB, Ethernet, and HDMI interfaces.

  10. Can MXSMBG16A be used in outdoor applications?

    • Yes, MXSMBG16A is suitable for outdoor applications due to its ability to withstand transient voltage surges caused by lightning and other environmental factors.