Məhsul təfərrüatları üçün spesifikasiyalara baxın.
MC908EY8CFAER
Product Overview
Category: Microcontroller
Use: Embedded systems, automotive applications
Characteristics: High-performance, low-power consumption, integrated peripherals
Package: 64-pin LQFP (Low-Profile Quad Flat Package)
Essence: A microcontroller designed for embedded systems with a focus on automotive applications
Packaging/Quantity: Individually packaged, quantity varies based on manufacturer
Specifications
- Architecture: 8-bit
- CPU Speed: Up to 8 MHz
- Flash Memory: 8 KB
- RAM: 512 bytes
- Operating Voltage: 2.7V to 5.5V
- Temperature Range: -40°C to +125°C
- Number of I/O Pins: 54
- Communication Interfaces: SPI, I2C, UART
- Analog-to-Digital Converter (ADC): 10-bit, 8 channels
- Timers/Counters: 16-bit, 4 channels
- PWM Channels: 4
- Watchdog Timer: Yes
- Operating Current: Varies based on usage
Detailed Pin Configuration
The MC908EY8CFAER microcontroller has a total of 64 pins. The pin configuration is as follows:
- VDDA - Analog Power Supply
- VSSA - Analog Ground
- PTA0 - General Purpose Input/Output (GPIO)
- PTA1 - GPIO
- PTA2 - GPIO
- PTA3 - GPIO
- PTA4 - GPIO
- PTA5 - GPIO
- PTA6 - GPIO
- PTA7 - GPIO
- RESET - Reset Pin
- IRQ - Interrupt Request Pin
- PTB0 - GPIO
- PTB1 - GPIO
- PTB2 - GPIO
- PTB3 - GPIO
- PTB4 - GPIO
- PTB5 - GPIO
- PTB6 - GPIO
- PTB7 - GPIO
- PTC0 - GPIO
- PTC1 - GPIO
- PTC2 - GPIO
- PTC3 - GPIO
- PTC4 - GPIO
- PTC5 - GPIO
- PTC6 - GPIO
- PTC7 - GPIO
- VDD - Digital Power Supply
- VSS - Digital Ground
- PTD0 - GPIO
- PTD1 - GPIO
- PTD2 - GPIO
- PTD3 - GPIO
- PTD4 - GPIO
- PTD5 - GPIO
- PTD6 - GPIO
- PTD7 - GPIO
- PTE0 - GPIO
- PTE1 - GPIO
- PTE2 - GPIO
- PTE3 - GPIO
- PTE4 - GPIO
- PTE5 - GPIO
- PTE6 - GPIO
- PTE7 - GPIO
- VCAP - Capacitor Connection for Voltage Regulator
- VREFH - High Reference Voltage
- VREFL - Low Reference Voltage
- AVSS - Analog Ground
- AVDD - Analog Power Supply
- AD0 - Analog Input Channel 0
- AD1 - Analog Input Channel 1
- AD2 - Analog Input Channel 2
- AD3 - Analog Input Channel 3
- AD4 - Analog Input Channel 4
- AD5 - Analog Input Channel 5
- AD6 - Analog Input Channel 6
- AD7 - Analog Input Channel 7
- VDDPLL - PLL Power Supply
- VSSPLL - PLL Ground
- XTAL - Crystal Connection
- EXTAL - Crystal Connection
- VDDX - Digital Power Supply
Functional Features
- High-performance 8-bit microcontroller suitable for embedded systems
- Designed specifically for automotive applications
- Low-power consumption for efficient operation
- Integrated peripherals such as SPI, I2C, UART for communication
- Analog-to-Digital Converter (ADC) for precise analog measurements
- Timers/Counters and PWM channels for accurate timing and control
- Reset pin and interrupt request pin for system control
- Watchdog timer for system reliability
Advantages and Disadvantages
Advantages: - High-performance capabilities - Low-power consumption - Integrated peripherals simplify system design - Suitable for automotive applications - Wide operating voltage range - Temperature range suitable for harsh environments
Disadvantages: - Limited flash memory capacity (8 KB) - Limited RAM capacity (512 bytes) - Limited number of
Texniki həllərdə MC908EY8CFAER tətbiqi ilə bağlı 10 ümumi sual və cavabı sadalayın
Sure! Here are 10 common questions and answers related to the application of MC908EY8CFAER in technical solutions:
Q: What is MC908EY8CFAER? A: MC908EY8CFAER is a microcontroller from the MC9S08 family, designed for embedded control applications.
Q: What are the key features of MC908EY8CFAER? A: Some key features include an 8-bit CPU, flash memory, EEPROM, analog-to-digital converter (ADC), timers, and communication interfaces.
Q: What is the maximum clock frequency supported by MC908EY8CFAER? A: MC908EY8CFAER supports a maximum clock frequency of 20 MHz.
Q: Can MC908EY8CFAER be used for low-power applications? A: Yes, MC908EY8CFAER has power-saving modes and features that make it suitable for low-power applications.
Q: What programming languages can be used with MC908EY8CFAER? A: MC908EY8CFAER can be programmed using assembly language or high-level languages like C.
Q: How much flash memory does MC908EY8CFAER have? A: MC908EY8CFAER has 8 KB of flash memory for program storage.
Q: Does MC908EY8CFAER support analog inputs? A: Yes, MC908EY8CFAER has an integrated 10-bit ADC that can be used for analog input measurements.
Q: Can MC908EY8CFAER communicate with other devices? A: Yes, MC908EY8CFAER supports various communication interfaces like UART, SPI, and I2C for data exchange with other devices.
Q: Is MC908EY8CFAER suitable for automotive applications? A: Yes, MC908EY8CFAER is designed to meet the requirements of automotive applications, including temperature and voltage ranges.
Q: Are there any development tools available for MC908EY8CFAER? A: Yes, there are several development tools available, including integrated development environments (IDEs) and debuggers, to aid in programming and testing MC908EY8CFAER-based solutions.
Please note that the specific details and answers may vary depending on the manufacturer's documentation and specifications of MC908EY8CFAER.