NXP USA Inc.
Şəkil təsvir ola bilər.
Məhsul təfərrüatları üçün spesifikasiyalara baxın.
MC908GR48ACFJE
Ətraflı Baxın Məlumat vərəqləri

MC908GR48ACFJE

Product Overview

Category

MC908GR48ACFJE belongs to the category of microcontrollers.

Use

It is primarily used for embedded systems and applications that require control and processing capabilities.

Characteristics

  • High-performance microcontroller with advanced features
  • Low power consumption
  • Compact size
  • Wide operating voltage range
  • Integrated peripherals for enhanced functionality

Package

MC908GR48ACFJE is available in a compact package, suitable for surface mount technology (SMT) assembly.

Essence

The essence of MC908GR48ACFJE lies in its ability to provide efficient control and processing capabilities in various embedded systems.

Packaging/Quantity

The product is typically packaged in reels or trays, depending on the manufacturer's specifications. The quantity per package may vary, but it is commonly available in quantities of 100 or more.

Specifications

  • Microcontroller core: 8-bit
  • Clock frequency: Up to 20 MHz
  • Flash memory: 48 KB
  • RAM: 2 KB
  • Operating voltage: 2.7V to 5.5V
  • Number of I/O pins: 48
  • Communication interfaces: UART, SPI, I2C
  • Analog-to-digital converter (ADC): 10-bit resolution, multiple channels
  • Timers and PWM outputs: Multiple timers with programmable functions
  • Operating temperature range: -40°C to +85°C

Detailed Pin Configuration

The pin configuration of MC908GR48ACFJE is as follows:

  1. VDD - Power supply
  2. VSS - Ground
  3. PTA0 - General-purpose I/O
  4. PTA1 - General-purpose I/O
  5. PTA2 - General-purpose I/O
  6. PTA3 - General-purpose I/O
  7. PTA4 - General-purpose I/O
  8. PTA5 - General-purpose I/O
  9. PTA6 - General-purpose I/O
  10. PTA7 - General-purpose I/O
  11. RESET - Reset pin
  12. PTB0 - General-purpose I/O
  13. PTB1 - General-purpose I/O
  14. PTB2 - General-purpose I/O
  15. PTB3 - General-purpose I/O
  16. PTB4 - General-purpose I/O
  17. PTB5 - General-purpose I/O
  18. PTB6 - General-purpose I/O
  19. PTB7 - General-purpose I/O
  20. ...

(Complete pin configuration available in the product datasheet)

Functional Features

  • High-speed processing capabilities
  • Integrated peripherals for enhanced functionality
  • Low power consumption for energy-efficient applications
  • Flexible communication interfaces for seamless connectivity
  • Analog-to-digital converter for precise sensor measurements
  • Timers and PWM outputs for accurate timing control

Advantages and Disadvantages

Advantages

  • High-performance microcontroller suitable for demanding applications
  • Compact size allows for space-saving designs
  • Wide operating voltage range enables compatibility with various power sources
  • Integrated peripherals reduce the need for external components
  • Low power consumption extends battery life in portable devices

Disadvantages

  • Limited memory capacity compared to higher-end microcontrollers
  • 8-bit architecture may not be suitable for certain complex applications
  • Limited number of I/O pins may restrict the connectivity options in some projects

Working Principles

MC908GR48ACFJE operates based on the principles of a typical microcontroller. It executes instructions stored in its flash memory, processes data, and controls various peripherals and I/O devices according to the program logic. The clock frequency determines the speed at which instructions are executed.

Detailed Application Field Plans

MC908GR48ACFJE finds applications in various fields, including but not limited to: - Industrial automation - Automotive electronics - Consumer electronics - Medical devices - Internet of Things (IoT) devices - Robotics

Detailed and Complete Alternative Models

Some alternative models that offer similar functionality to MC908GR48ACFJE are: - MC9S08AW60CFDE - MC9S08GB60ACFUE - MC9S08JM16CLD - MC9S08LL64CLH - MC9S08PA8VLC

These models provide different memory capacities, pin configurations, and additional features, allowing designers to choose the most suitable microcontroller for their specific requirements.

(Note: The list of alternative models may vary based on availability and manufacturer updates)

Word count: 550 words

Texniki həllərdə MC908GR48ACFJE tətbiqi ilə bağlı 10 ümumi sual və cavabı sadalayın

Sure! Here are 10 common questions and answers related to the application of MC908GR48ACFJE in technical solutions:

  1. Q: What is MC908GR48ACFJE? A: MC908GR48ACFJE is a microcontroller from the MC908GR series, manufactured by NXP Semiconductors.

  2. Q: What are the key features of MC908GR48ACFJE? A: Some key features include an 8-bit CPU core, flash memory, RAM, multiple I/O ports, timers, and analog-to-digital converters.

  3. Q: What are the typical applications of MC908GR48ACFJE? A: MC908GR48ACFJE is commonly used in various technical solutions such as industrial control systems, automotive electronics, consumer electronics, and home automation.

  4. Q: How much flash memory does MC908GR48ACFJE have? A: MC908GR48ACFJE has 48 KB of flash memory for storing program code.

  5. Q: Can MC908GR48ACFJE be programmed using C or assembly language? A: Yes, MC908GR48ACFJE can be programmed using both C and assembly language.

  6. Q: Does MC908GR48ACFJE support communication protocols like UART, SPI, and I2C? A: Yes, MC908GR48ACFJE supports UART (Universal Asynchronous Receiver-Transmitter), SPI (Serial Peripheral Interface), and I2C (Inter-Integrated Circuit) communication protocols.

  7. Q: What is the operating voltage range of MC908GR48ACFJE? A: The operating voltage range of MC908GR48ACFJE is typically between 2.7V and 5.5V.

  8. Q: Can MC908GR48ACFJE operate in low-power modes? A: Yes, MC908GR48ACFJE has low-power modes such as wait mode and stop mode to conserve energy when not actively processing.

  9. Q: Does MC908GR48ACFJE have built-in analog-to-digital converters (ADC)? A: Yes, MC908GR48ACFJE has multiple built-in 10-bit ADCs for converting analog signals into digital values.

  10. Q: Are there any development tools available for programming MC908GR48ACFJE? A: Yes, NXP provides development tools like IDEs (Integrated Development Environments), compilers, debuggers, and evaluation boards specifically designed for programming and testing MC908GR48ACFJE-based solutions.

Please note that the specific details may vary depending on the version or variant of MC908GR48ACFJE being used.