NXP USA Inc.
Şəkil təsvir ola bilər.
Məhsul təfərrüatları üçün spesifikasiyalara baxın.
MC9S08DV48ACLF
Ətraflı Baxın Məlumat vərəqləri

MC9S08DV48ACLF

Product Overview

Category: Microcontroller
Use: Embedded systems, consumer electronics, automotive applications
Characteristics: Low power consumption, high performance, integrated peripherals
Package: 64-pin LQFP (Low Profile Quad Flat Package)
Essence: 8-bit microcontroller with enhanced capabilities
Packaging/Quantity: Tape and reel, 2500 units per reel

Specifications

  • Architecture: 8-bit
  • CPU Speed: Up to 48 MHz
  • Flash Memory: 48 KB
  • RAM: 4 KB
  • Operating Voltage Range: 2.7V to 5.5V
  • Operating Temperature Range: -40°C to +85°C
  • Number of I/O Pins: 54
  • Communication Interfaces: UART, SPI, I2C
  • Analog-to-Digital Converter (ADC): 10-bit, 16 channels
  • Timers: 6-channel TPM/PWM module
  • Interrupts: 32 interrupt sources
  • Package Dimensions: 10mm x 10mm

Detailed Pin Configuration

The MC9S08DV48ACLF microcontroller has a total of 64 pins. The pin configuration is as follows:

  1. VDD - Power supply voltage
  2. VSS - Ground
  3. PTA0 - General-purpose I/O pin
  4. PTA1 - General-purpose I/O pin
  5. PTA2 - General-purpose I/O pin
  6. PTA3 - General-purpose I/O pin
  7. PTA4 - General-purpose I/O pin
  8. PTA5 - General-purpose I/O pin
  9. PTA6 - General-purpose I/O pin
  10. PTA7 - General-purpose I/O pin
  11. RESET - Reset pin
  12. PTB0 - General-purpose I/O pin
  13. PTB1 - General-purpose I/O pin
  14. PTB2 - General-purpose I/O pin
  15. PTB3 - General-purpose I/O pin
  16. PTB4 - General-purpose I/O pin
  17. PTB5 - General-purpose I/O pin
  18. PTB6 - General-purpose I/O pin
  19. PTB7 - General-purpose I/O pin
  20. PTC0 - General-purpose I/O pin
  21. PTC1 - General-purpose I/O pin
  22. PTC2 - General-purpose I/O pin
  23. PTC3 - General-purpose I/O pin
  24. PTC4 - General-purpose I/O pin
  25. PTC5 - General-purpose I/O pin
  26. PTC6 - General-purpose I/O pin
  27. PTC7 - General-purpose I/O pin
  28. VSS - Ground
  29. VDD - Power supply voltage
  30. PTD0 - General-purpose I/O pin
  31. PTD1 - General-purpose I/O pin
  32. PTD2 - General-purpose I/O pin
  33. PTD3 - General-purpose I/O pin
  34. PTD4 - General-purpose I/O pin
  35. PTD5 - General-purpose I/O pin
  36. PTD6 - General-purpose I/O pin
  37. PTD7 - General-purpose I/O pin
  38. PTE0 - General-purpose I/O pin
  39. PTE1 - General-purpose I/O pin
  40. PTE2 - General-purpose I/O pin
  41. PTE3 - General-purpose I/O pin
  42. PTE4 - General-purpose I/O pin
  43. PTE5 - General-purpose I/O pin
  44. PTE6 - General-purpose I/O pin
  45. PTE7 - General-purpose I/O pin
  46. VSS - Ground
  47. VDD - Power supply voltage
  48. PTF0 - General-purpose I/O pin
  49. PTF1 - General-purpose I/O pin
  50. PTF2 - General-purpose I/O pin
  51. PTF3 - General-purpose I/O pin
  52. PTF4 - General-purpose I/O pin
  53. PTF5 - General-purpose I/O pin
  54. PTF6 - General-purpose I/O pin
  55. PTF7 - General-purpose I/O pin
  56. PTG0 - General-purpose I/O pin
  57. PTG1 - General-purpose I/O pin
  58. PTG2 - General-purpose I/O pin
  59. PTG3 - General-purpose I/O pin
  60. PTG4 - General-purpose I/O pin
  61. PTG5 - General-purpose I/O pin
  62. PTG6 - General-purpose I/O pin
  63. PTG7 - General-purpose I/O

Texniki həllərdə MC9S08DV48ACLF tətbiqi ilə bağlı 10 ümumi sual və cavabı sadalayın

  1. What is the maximum operating frequency of MC9S08DV48ACLF?
    - The maximum operating frequency of MC9S08DV48ACLF is 40 MHz.

  2. What are the key features of MC9S08DV48ACLF?
    - Key features of MC9S08DV48ACLF include an integrated analog-to-digital converter, multiple communication interfaces, and low-power modes.

  3. Can MC9S08DV48ACLF be used in automotive applications?
    - Yes, MC9S08DV48ACLF is suitable for automotive applications due to its robust design and temperature range.

  4. What development tools are available for MC9S08DV48ACLF?
    - Development tools such as CodeWarrior IDE and PEmicro hardware interfaces are commonly used for MC9S08DV48ACLF.

  5. Does MC9S08DV48ACLF support low-power operation?
    - Yes, MC9S08DV48ACLF offers low-power modes to optimize energy efficiency in battery-powered applications.

  6. What communication interfaces does MC9S08DV48ACLF support?
    - MC9S08DV48ACLF supports interfaces such as I2C, SPI, UART, and CAN for versatile connectivity options.

  7. Is MC9S08DV48ACLF suitable for industrial control systems?
    - Yes, MC9S08DV48ACLF is well-suited for industrial control systems due to its reliability and robust feature set.

  8. Can MC9S08DV48ACLF be programmed using C language?
    - Yes, MC9S08DV48ACLF can be programmed using C language with appropriate development tools and compilers.

  9. What is the typical voltage supply range for MC9S08DV48ACLF?
    - The typical voltage supply range for MC9S08DV48ACLF is 2.7V to 5.5V, making it compatible with various power sources.

  10. Are there any application notes or reference designs available for MC9S08DV48ACLF?
    - Yes, NXP provides comprehensive application notes and reference designs to assist in the implementation of MC9S08DV48ACLF in technical solutions.