NXP USA Inc.
Şəkil təsvir ola bilər.
Məhsul təfərrüatları üçün spesifikasiyalara baxın.
MC9S08DZ60CLC
Ətraflı Baxın Məlumat vərəqləri

MC9S08DZ60CLC

Product Overview

Category

MC9S08DZ60CLC belongs to the category of microcontrollers.

Use

It is commonly used in various electronic devices and systems that require embedded control.

Characteristics

  • Low power consumption
  • High performance
  • Small form factor
  • Integrated peripherals
  • Enhanced security features

Package

MC9S08DZ60CLC is available in a compact LQFP package.

Essence

The essence of MC9S08DZ60CLC lies in its ability to provide efficient and reliable control for electronic devices.

Packaging/Quantity

This microcontroller is typically packaged in reels or trays, with varying quantities depending on the manufacturer's specifications.

Specifications

  • Architecture: 8-bit
  • CPU Speed: Up to 48 MHz
  • Flash Memory: 60 KB
  • RAM: 4 KB
  • Operating Voltage: 2.7V to 5.5V
  • Number of I/O Pins: 56
  • Communication Interfaces: UART, SPI, I2C
  • Analog-to-Digital Converter (ADC): 10-bit, 16 channels
  • Timers: 8-bit and 16-bit timers
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The MC9S08DZ60CLC microcontroller has a total of 56 pins. The pin configuration is as follows:

  1. VDD - Power supply voltage
  2. VSS - Ground
  3. PTA0 - General-purpose I/O pin
  4. PTA1 - General-purpose I/O pin
  5. PTA2 - General-purpose I/O pin
  6. PTA3 - General-purpose I/O pin
  7. PTA4 - General-purpose I/O pin
  8. PTA5 - General-purpose I/O pin
  9. PTA6 - General-purpose I/O pin
  10. PTA7 - General-purpose I/O pin
  11. PTB0 - General-purpose I/O pin
  12. PTB1 - General-purpose I/O pin
  13. PTB2 - General-purpose I/O pin
  14. PTB3 - General-purpose I/O pin
  15. PTB4 - General-purpose I/O pin
  16. PTB5 - General-purpose I/O pin
  17. PTB6 - General-purpose I/O pin
  18. PTB7 - General-purpose I/O pin
  19. PTC0 - General-purpose I/O pin
  20. PTC1 - General-purpose I/O pin
  21. PTC2 - General-purpose I/O pin
  22. PTC3 - General-purpose I/O pin
  23. PTC4 - General-purpose I/O pin
  24. PTC5 - General-purpose I/O pin
  25. PTC6 - General-purpose I/O pin
  26. PTC7 - General-purpose I/O pin
  27. PTD0 - General-purpose I/O pin
  28. PTD1 - General-purpose I/O pin
  29. PTD2 - General-purpose I/O pin
  30. PTD3 - General-purpose I/O pin
  31. PTD4 - General-purpose I/O pin
  32. PTD5 - General-purpose I/O pin
  33. PTD6 - General-purpose I/O pin
  34. PTD7 - General-purpose I/O pin
  35. PTE0 - General-purpose I/O pin
  36. PTE1 - General-purpose I/O pin
  37. PTE2 - General-purpose I/O pin
  38. PTE3 - General-purpose I/O pin
  39. PTE4 - General-purpose I/O pin
  40. PTE5 - General-purpose I/O pin
  41. PTE6 - General-purpose I/O pin
  42. PTE7 - General-purpose I/O pin
  43. RESET - Reset pin
  44. IRQ - Interrupt request pin
  45. BKGD - Background debug mode pin
  46. VDDA - Analog power supply voltage
  47. VREFH - High reference voltage for ADC
  48. VREFL - Low reference voltage for ADC
  49. VSSA - Analog ground
  50. XTAL - Crystal oscillator input
  51. EXTAL - Crystal oscillator output
  52. TEST - Test pin
  53. RSTOUT - Reset output pin
  54. VBAT - Backup battery input
  55. VDDPLL - Power supply voltage for PLL
  56. VSSPLL - Ground for PLL

Functional Features

  • Enhanced 8-bit CPU with efficient instruction set
  • Multiple communication interfaces for data exchange
  • Integrated analog-to-digital converter for precise measurements
  • Timers for accurate timing control
  • Low-power modes for energy efficiency
  • Security features to protect sensitive data

Advantages and Disadvantages

Texniki həllərdə MC9S08DZ60CLC tətbiqi ilə bağlı 10 ümumi sual və cavabı sadalayın

Sure! Here are 10 common questions and answers related to the application of MC9S08DZ60CLC in technical solutions:

  1. Q: What is MC9S08DZ60CLC? A: MC9S08DZ60CLC is a microcontroller from NXP Semiconductors, specifically designed for embedded applications.

  2. Q: What are the key features of MC9S08DZ60CLC? A: Some key features include a 8-bit CPU, 60KB flash memory, 4KB RAM, multiple communication interfaces, and various peripherals.

  3. Q: What technical solutions can MC9S08DZ60CLC be used for? A: MC9S08DZ60CLC can be used in a wide range of applications such as industrial control systems, consumer electronics, automotive systems, and more.

  4. Q: How can I program MC9S08DZ60CLC? A: MC9S08DZ60CLC can be programmed using various development tools and software, such as CodeWarrior IDE or other compatible Integrated Development Environments (IDEs).

  5. Q: What programming languages are supported by MC9S08DZ60CLC? A: MC9S08DZ60CLC supports assembly language and C programming language, which are commonly used for embedded systems development.

  6. Q: Can MC9S08DZ60CLC communicate with other devices? A: Yes, MC9S08DZ60CLC has built-in communication interfaces like UART, SPI, and I2C, allowing it to communicate with other devices or peripherals.

  7. Q: Is MC9S08DZ60CLC suitable for low-power applications? A: Yes, MC9S08DZ60CLC is designed to be power-efficient and offers various low-power modes, making it suitable for battery-powered or energy-conscious applications.

  8. Q: Can MC9S08DZ60CLC handle real-time tasks? A: Yes, MC9S08DZ60CLC has a real-time clock (RTC) module and can be programmed to handle real-time tasks with precise timing requirements.

  9. Q: Are there any development boards available for MC9S08DZ60CLC? A: Yes, NXP provides development boards like the DEMO9S08DZ60 board, which includes the MC9S08DZ60CLC microcontroller and various peripherals for prototyping and testing.

  10. Q: Where can I find more resources and support for MC9S08DZ60CLC? A: You can find more resources, documentation, application notes, and community support on the NXP website or through their technical support channels.

Please note that the answers provided here are general and may vary depending on specific requirements and use cases.