NXP USA Inc.
Şəkil təsvir ola bilər.
Məhsul təfərrüatları üçün spesifikasiyalara baxın.
MC9S08DZ60MLF
Ətraflı Baxın Məlumat vərəqləri

MC9S08DZ60MLF

Product Overview

Category

MC9S08DZ60MLF belongs to the category of microcontrollers.

Use

It is primarily used for embedded systems and applications that require control and processing capabilities.

Characteristics

  • Low power consumption
  • High performance
  • Small form factor
  • Integrated peripherals
  • Flexible input/output options

Package

MC9S08DZ60MLF comes in a small form factor package, suitable for compact designs.

Essence

The essence of MC9S08DZ60MLF lies in its ability to provide efficient control and processing capabilities in a compact and low-power package.

Packaging/Quantity

The product is typically packaged in reels or trays, with varying quantities depending on the manufacturer's specifications.

Specifications

  • Microcontroller core: 8-bit HCS08
  • Clock speed: up to 40 MHz
  • Flash memory: 60 KB
  • RAM: 4 KB
  • Operating voltage: 2.7V to 5.5V
  • Number of I/O pins: 48
  • Communication interfaces: UART, SPI, I2C
  • Analog-to-digital converter (ADC): 10-bit resolution, up to 16 channels

Detailed Pin Configuration

The MC9S08DZ60MLF microcontroller has a total of 48 pins. The pin configuration is as follows:

  1. VDD - Power supply voltage
  2. VSS - Ground
  3. PTA0 - General-purpose I/O pin
  4. PTA1 - General-purpose I/O pin
  5. PTA2 - General-purpose I/O pin
  6. PTA3 - General-purpose I/O pin
  7. PTA4 - General-purpose I/O pin
  8. PTA5 - General-purpose I/O pin
  9. PTA6 - General-purpose I/O pin
  10. PTA7 - General-purpose I/O pin
  11. RESET - Reset pin
  12. PTB0 - General-purpose I/O pin
  13. PTB1 - General-purpose I/O pin
  14. PTB2 - General-purpose I/O pin
  15. PTB3 - General-purpose I/O pin
  16. PTB4 - General-purpose I/O pin
  17. PTB5 - General-purpose I/O pin
  18. PTB6 - General-purpose I/O pin
  19. PTB7 - General-purpose I/O pin
  20. VDD - Power supply voltage
  21. VSS - Ground
  22. PTC0 - General-purpose I/O pin
  23. PTC1 - General-purpose I/O pin
  24. PTC2 - General-purpose I/O pin
  25. PTC3 - General-purpose I/O pin
  26. PTC4 - General-purpose I/O pin
  27. PTC5 - General-purpose I/O pin
  28. PTC6 - General-purpose I/O pin
  29. PTC7 - General-purpose I/O pin
  30. IRQ - Interrupt request pin
  31. PTD0 - General-purpose I/O pin
  32. PTD1 - General-purpose I/O pin
  33. PTD2 - General-purpose I/O pin
  34. PTD3 - General-purpose I/O pin
  35. PTD4 - General-purpose I/O pin
  36. PTD5 - General-purpose I/O pin
  37. PTD6 - General-purpose I/O pin
  38. PTD7 - General-purpose I/O pin
  39. VDD - Power supply voltage
  40. VSS - Ground
  41. PTE0 - General-purpose I/O pin
  42. PTE1 - General-purpose I/O pin
  43. PTE2 - General-purpose I/O pin
  44. PTE3 - General-purpose I/O pin
  45. PTE4 - General-purpose I/O pin
  46. PTE5 - General-purpose I/O pin
  47. PTE6 - General-purpose I/O pin
  48. PTE7 - General-purpose I/O pin

Functional Features

  • High-performance 8-bit HCS08 core for efficient control and processing
  • Integrated peripherals such as UART, SPI, and I2C for communication
  • Flexible input/output options with 48 I/O pins
  • Analog-to-digital converter (ADC) with 10-bit resolution for accurate analog measurements
  • Low power consumption for energy-efficient designs

Advantages and Disadvantages

Advantages

  • Compact form factor suitable for space-constrained designs
  • High-performance core for efficient processing
  • Integrated peripherals simplify system design
  • Flexible I/O options for versatile applications
  • Low power consumption extends battery life

Disadvantages

  • Limited memory capacity compared to higher-end microcontrollers
  • 8-bit architecture may not be suitable for complex applications requiring higher precision

Texniki həllərdə MC9S08DZ60MLF tətbiqi ilə bağlı 10 ümumi sual və cavabı sadalayın

  1. What is the maximum operating frequency of MC9S08DZ60MLF?
    - The maximum operating frequency of MC9S08DZ60MLF is 40 MHz.

  2. What are the key features of MC9S08DZ60MLF?
    - Some key features of MC9S08DZ60MLF include a 8-bit S08 core, up to 60 KB flash memory, and integrated peripherals such as timers, analog comparators, and UART modules.

  3. Can MC9S08DZ60MLF be used in automotive applications?
    - Yes, MC9S08DZ60MLF is suitable for automotive applications due to its robust design and temperature range.

  4. What development tools are available for MC9S08DZ60MLF?
    - Development tools such as CodeWarrior IDE and PEmicro hardware interfaces are commonly used for MC9S08DZ60MLF.

  5. Is MC9S08DZ60MLF suitable for low-power applications?
    - Yes, MC9S08DZ60MLF offers low-power modes and features to support battery-powered or energy-efficient applications.

  6. What communication interfaces does MC9S08DZ60MLF support?
    - MC9S08DZ60MLF supports interfaces such as SPI, I2C, and UART for communication with other devices.

  7. Can MC9S08DZ60MLF be used in industrial control systems?
    - Yes, MC9S08DZ60MLF is well-suited for industrial control systems due to its reliability and robustness.

  8. What are the available package options for MC9S08DZ60MLF?
    - MC9S08DZ60MLF is available in various package options including LQFP, QFN, and TSSOP.

  9. Does MC9S08DZ60MLF have built-in security features?
    - Yes, MC9S08DZ60MLF includes security features such as flash memory protection and secure communication protocols.

  10. Are there any application notes or reference designs available for MC9S08DZ60MLF?
    - Yes, NXP provides application notes and reference designs to assist in the implementation of MC9S08DZ60MLF in technical solutions.