NXP USA Inc.
Şəkil təsvir ola bilər.
Məhsul təfərrüatları üçün spesifikasiyalara baxın.
MPX2102GP
Ətraflı Baxın Məlumat vərəqləri

MPX2102GP

Product Overview

The MPX2102GP belongs to the category of pressure sensors and is commonly used for measuring absolute pressure in various applications. This sensor is known for its high accuracy, reliability, and robust packaging, making it suitable for demanding environments. The MPX2102GP is typically available in a small package and is designed to provide precise pressure measurements.

Basic Information

  • Category: Pressure Sensor
  • Use: Measuring Absolute Pressure
  • Characteristics: High Accuracy, Reliability, Robust Packaging
  • Package: Small Form Factor
  • Essence: Precise Pressure Measurement
  • Packaging/Quantity: Varies by Supplier

Specifications

  • Pressure Range: 0 to 100 kPa
  • Supply Voltage: 4.85 to 5.35 V
  • Output Type: Analog
  • Operating Temperature: -40°C to 125°C
  • Sensitivity: 45 mV/kPa

Detailed Pin Configuration

The MPX2102GP features a total of 6 pins: 1. Vout (Analog Output) 2. Vss (Ground) 3. V+ (Supply Voltage) 4. NC (No Connection) 5. NC (No Connection) 6. NC (No Connection)

Functional Features

  • High Accuracy
  • Low Power Consumption
  • Overvoltage Protection
  • Temperature Compensation

Advantages and Disadvantages

Advantages

  • High Accuracy
  • Robust Packaging
  • Wide Operating Temperature Range

Disadvantages

  • Limited Pressure Range
  • Analog Output Requires Additional Signal Conditioning

Working Principles

The MPX2102GP operates on the principle of piezoresistive sensing, where changes in pressure cause a corresponding change in resistance. This change is then converted into an analog voltage output, providing an accurate representation of the applied pressure.

Detailed Application Field Plans

The MPX2102GP is commonly used in the following applications: - Automotive Engine Control Systems - Industrial Automation - Medical Devices - HVAC Systems

Detailed and Complete Alternative Models

  • MPX2050GP
  • MPX5700AP

In conclusion, the MPX2102GP is a reliable and accurate pressure sensor suitable for various applications, despite its limited pressure range and the need for additional signal conditioning when using the analog output.

Word Count: 346

Texniki həllərdə MPX2102GP tətbiqi ilə bağlı 10 ümumi sual və cavabı sadalayın

  1. What is the MPX2102GP?

    • The MPX2102GP is a pressure sensor designed to measure absolute or differential pressure.

  2. What is the operating voltage range of the MPX2102GP?

    • The operating voltage range of the MPX2102GP is typically 4.75V to 5.25V.

  3. What is the pressure range that the MPX2102GP can measure?

    • The MPX2102GP can measure pressure ranges from 0 to 100 kPa (0 to 14.5 psi).

  4. How does the MPX2102GP communicate with microcontrollers or other devices?

    • The MPX2102GP typically communicates using analog voltage output proportional to the measured pressure.

  5. What are some common applications for the MPX2102GP?

    • Common applications include industrial controls, HVAC systems, and medical equipment.

  6. What is the accuracy of the MPX2102GP?

    • The accuracy of the MPX2102GP is typically within ±2.5% full scale.

  7. Can the MPX2102GP be used in harsh environments?

    • Yes, the MPX2102GP is designed to operate in harsh environments and is suitable for various industrial applications.

  8. Does the MPX2102GP require calibration?

    • It is recommended to calibrate the MPX2102GP periodically to maintain accuracy.

  9. Is the MPX2102GP sensitive to temperature changes?

    • The MPX2102GP has built-in temperature compensation to minimize the impact of temperature changes on its measurements.

  10. What is the typical response time of the MPX2102GP?

    • The typical response time of the MPX2102GP is in the range of milliseconds, making it suitable for dynamic pressure measurements.