Məhsul təfərrüatları üçün spesifikasiyalara baxın.
MPX2200AP
Product Overview
The MPX2200AP belongs to the category of pressure sensors and is commonly used for measuring absolute pressure in various applications. This sensor is known for its high accuracy, reliability, and compact package, making it suitable for a wide range of industrial and consumer electronic devices.
Basic Information
- Category: Pressure Sensor
- Use: Measure Absolute Pressure
- Characteristics: High Accuracy, Reliability
- Package: Compact
- Essence: Accurate Pressure Measurement
- Packaging/Quantity: Varies by Supplier
Specifications
- Pressure Range: 0 to 200 kPa
- Supply Voltage: 4.85 to 5.35 V
- Output: 0.2 to 4.7 V
- Operating Temperature: -40°C to 125°C
- Compensated Temperature: 0°C to 85°C
Detailed Pin Configuration
The MPX2200AP features a total of 6 pins: 1. Vout (Output Voltage) 2. Vsupply (Supply Voltage) 3. GND (Ground) 4. N/C (Not Connected) 5. N/C (Not Connected) 6. N/C (Not Connected)
Functional Features
- High Accuracy Pressure Measurement
- Wide Operating Temperature Range
- Low Power Consumption
- Small Form Factor
Advantages and Disadvantages
Advantages
- High Accuracy
- Wide Operating Temperature Range
- Compact Size
- Low Power Consumption
Disadvantages
- Limited Pressure Range
- Sensitivity to EMI/RFI Interference
Working Principles
The MPX2200AP utilizes piezoresistive technology to measure absolute pressure. When pressure is applied, the internal resistors change their values, resulting in a corresponding change in output voltage. This voltage is then converted into a digital signal for further processing.
Detailed Application Field Plans
The MPX2200AP is widely used in the following applications: - Automotive Engine Control Systems - Industrial Process Control - Medical Devices - Consumer Electronics
Detailed and Complete Alternative Models
- MPX5700AP - Higher Pressure Range
- MPX5050AP - Lower Pressure Range
- MPXV5010DP - Dual Port Design
In conclusion, the MPX2200AP is a reliable and accurate pressure sensor that finds extensive use in various industries due to its compact size, high accuracy, and wide operating temperature range.
[Word Count: 324]
Texniki həllərdə MPX2200AP tətbiqi ilə bağlı 10 ümumi sual və cavabı sadalayın
Sure, here are 10 common questions and answers related to the application of MPX2200AP in technical solutions:
What is the operating pressure range of MPX2200AP?
- The operating pressure range of MPX2200AP is 0 to 200 kPa (0 to 29 psi).
What is the output voltage range of MPX2200AP?
- The output voltage range of MPX2200AP is typically 0.5V to 4.5V.
Can MPX2200AP be used for measuring air or gas pressure?
- Yes, MPX2200AP is suitable for measuring air or gas pressure within its specified range.
What is the supply voltage requirement for MPX2200AP?
- The supply voltage requirement for MPX2200AP is 4.75V to 5.25V.
Is MPX2200AP compatible with microcontrollers and ADCs?
- Yes, MPX2200AP can be easily interfaced with microcontrollers and ADCs due to its ratiometric output.
What is the temperature range for proper operation of MPX2200AP?
- The temperature range for proper operation of MPX2200AP is -40°C to 125°C.
Can MPX2200AP be used in automotive applications?
- Yes, MPX2200AP is commonly used in automotive applications such as tire pressure monitoring systems.
Does MPX2200AP require external calibration?
- No, MPX2200AP is factory calibrated and does not require external calibration.
What is the response time of MPX2200AP?
- The response time of MPX2200AP is typically less than 1ms.
Can MPX2200AP be used in medical devices?
- Yes, MPX2200AP can be utilized in medical devices for pressure sensing applications within its specified range.
These questions and answers cover various aspects of the application of MPX2200AP in technical solutions. If you have any more specific questions, feel free to ask!