NXP USA Inc.
Şəkil təsvir ola bilər.
Məhsul təfərrüatları üçün spesifikasiyalara baxın.
MPXHZ6250AC6T1
Ətraflı Baxın Məlumat vərəqləri

MPXHZ6250AC6T1

Introduction

The MPXHZ6250AC6T1 is a pressure sensor belonging to the category of integrated silicon pressure sensors. This sensor is widely used in various industrial and automotive applications due to its high accuracy, reliability, and compact design.

Basic Information Overview

  • Category: Integrated Silicon Pressure Sensor
  • Use: Measuring pressure in industrial and automotive applications
  • Characteristics: High accuracy, reliability, compact design
  • Package: Surface mount
  • Essence: Accurate pressure measurement
  • Packaging/Quantity: Tape and reel packaging, quantity varies based on supplier

Specifications

  • Pressure Range: 0 to 250 kPa
  • Supply Voltage: 4.75 to 5.25 V
  • Output Type: Analog
  • Operating Temperature Range: -40°C to 125°C
  • Accuracy: ±1.5% Full Scale Span (typical)

Detailed Pin Configuration

The MPXHZ6250AC6T1 features a total of six pins: 1. Vout (Analog Output) 2. Vsupply (Power Supply) 3. GND (Ground) 4. NC (No Connection) 5. NC (No Connection) 6. NC (No Connection)

Functional Features

  • High accuracy and linearity
  • Ratiometric output
  • Compensated temperature performance
  • Durable and robust design

Advantages and Disadvantages

Advantages

  • High accuracy
  • Wide operating temperature range
  • Compact size
  • Ratiometric output for easy interfacing

Disadvantages

  • Limited pressure range
  • Analog output may require additional signal conditioning

Working Principles

The MPXHZ6250AC6T1 operates on the principle of piezoresistive sensing. When pressure is applied, the internal resistors change their resistance, resulting in a corresponding change in the output voltage. This voltage is proportional to the applied pressure and is provided as the sensor's output.

Detailed Application Field Plans

The MPXHZ6250AC6T1 is suitable for a wide range of applications, including: - Industrial automation - HVAC systems - Automotive engine management - Medical equipment - Aerospace and aviation

Detailed and Complete Alternative Models

Some alternative models to the MPXHZ6250AC6T1 include: - MPX5700AP - MPXV5010DP - MPX2050GP

In conclusion, the MPXHZ6250AC6T1 is a highly reliable and accurate pressure sensor suitable for various industrial and automotive applications. Its compact design and excellent performance make it a preferred choice for engineers and designers seeking precise pressure measurement solutions.

Texniki həllərdə MPXHZ6250AC6T1 tətbiqi ilə bağlı 10 ümumi sual və cavabı sadalayın

  1. What is the MPXHZ6250AC6T1 pressure sensor used for?

    • The MPXHZ6250AC6T1 pressure sensor is commonly used to measure and monitor air or gas pressure in various technical solutions.

  2. What is the operating voltage range of the MPXHZ6250AC6T1?

    • The operating voltage range of the MPXHZ6250AC6T1 is typically 4.75V to 5.25V.

  3. How does the MPXHZ6250AC6T1 communicate with microcontrollers or data acquisition systems?

    • The MPXHZ6250AC6T1 usually communicates using analog voltage output, making it compatible with most microcontrollers and data acquisition systems.

  4. What is the pressure range that the MPXHZ6250AC6T1 can measure?

    • The MPXHZ6250AC6T1 can measure pressure within a range of 0 to 250 kPa (0 to 36.3 psi).

  5. Is the MPXHZ6250AC6T1 suitable for harsh environments?

    • Yes, the MPXHZ6250AC6T1 is designed to be suitable for use in harsh environments due to its robust construction and reliability.

  6. What is the accuracy of the MPXHZ6250AC6T1 pressure sensor?

    • The MPXHZ6250AC6T1 typically has an accuracy of around ±1.5% full scale span over the specified temperature range.

  7. Can the MPXHZ6250AC6T1 be used for automotive applications?

    • Yes, the MPXHZ6250AC6T1 is often used in automotive applications such as tire pressure monitoring systems and engine control systems.

  8. Does the MPXHZ6250AC6T1 require calibration?

    • The MPXHZ6250AC6T1 may require initial calibration to ensure accurate measurements, especially if high precision is needed.

  9. What are the typical applications of the MPXHZ6250AC6T1 in technical solutions?

    • Typical applications include industrial automation, HVAC systems, medical devices, and aerospace applications.

  10. Is the MPXHZ6250AC6T1 sensitive to vibration or shock?

    • The MPXHZ6250AC6T1 is designed to have minimal sensitivity to vibration or shock, making it suitable for dynamic environments.