NXP USA Inc.
Şəkil təsvir ola bilər.
Məhsul təfərrüatları üçün spesifikasiyalara baxın.
MPXV5010GP
Ətraflı Baxın Məlumat vərəqləri

MPXV5010GP

Introduction

The MPXV5010GP is a pressure sensor belonging to the category of integrated pressure sensors. It is commonly used for measuring absolute pressure in various applications. This sensor possesses unique characteristics and comes in a specific package, making it suitable for a wide range of industrial and commercial uses.

Basic Information Overview

  • Category: Integrated Pressure Sensor
  • Use: Measuring Absolute Pressure
  • Characteristics: Small Size, High Accuracy, Low Power Consumption
  • Package: Surface Mount
  • Essence: Accurate Pressure Sensing
  • Packaging/Quantity: Tape and Reel (2500 units per reel)

Specifications

  • Pressure Range: 0 to 10 kPa
  • Supply Voltage: 4.75 to 5.25 V
  • Output Type: Analog
  • Operating Temperature: -40°C to 125°C
  • Accuracy: ±1.5% Full Scale

Detailed Pin Configuration

The MPXV5010GP features a total of 6 pins: 1. Vout - Analog Output 2. Vss - Ground 3. Vdd - Supply Voltage 4. N/C - No Connection 5. N/C - No Connection 6. N/C - No Connection

Functional Features

  • High Accuracy: Provides precise pressure measurements
  • Small Size: Enables integration into compact designs
  • Low Power Consumption: Ideal for battery-powered applications
  • Robust Construction: Suitable for harsh environments

Advantages and Disadvantages

Advantages

  • Accurate pressure sensing
  • Compact size
  • Low power consumption
  • Robust construction

Disadvantages

  • Limited pressure range
  • Analog output may require additional signal conditioning

Working Principles

The MPXV5010GP operates on the principle of piezoresistive sensing. When subjected to pressure, the sensor's internal diaphragm deflects, causing a change in resistance. This change is then converted into an analog voltage output proportional to the applied pressure.

Detailed Application Field Plans

The MPXV5010GP finds extensive use in various applications, including: - Medical Devices: Blood pressure monitors, respiratory equipment - HVAC Systems: Air flow control, filter monitoring - Industrial Automation: Hydraulic systems, pneumatic controls - Consumer Electronics: Smartphones, wearable devices

Detailed and Complete Alternative Models

  • MPXV5004GC6U: Similar pressure sensor with a different pressure range
  • MPXV5004DP: Differential pressure sensor for specialized applications
  • MPXV5006GC6T1: Higher pressure range variant for industrial use

In conclusion, the MPXV5010GP is a versatile integrated pressure sensor with high accuracy and small form factor, making it suitable for a wide range of applications across various industries.

[Word Count: 410]

Texniki həllərdə MPXV5010GP tətbiqi ilə bağlı 10 ümumi sual və cavabı sadalayın

  1. What is the MPXV5010GP pressure sensor used for?

    • The MPXV5010GP is a pressure sensor designed to measure absolute pressure in various applications, such as automotive, industrial, and medical devices.

  2. How does the MPXV5010GP work?

    • The sensor utilizes a piezoresistive transducer to convert pressure into an analog output voltage, which can be interfaced with microcontrollers or other electronic systems for pressure measurement.

  3. What is the operating range of the MPXV5010GP?

    • The sensor has an operating pressure range of 0 to 10 kPa (0 to 1.45 psi), making it suitable for low-pressure measurement applications.

  4. Can the MPXV5010GP be used in harsh environments?

    • While the sensor is not designed for extreme environmental conditions, it can be used in controlled industrial environments with proper protection and sealing.

  5. How accurate is the MPXV5010GP?

    • The sensor typically offers high accuracy within its specified pressure range, with variations depending on the specific application and calibration.

  6. What are the typical applications of the MPXV5010GP?

    • Common applications include air flow measurement, pneumatic control systems, altitude measurement, and medical equipment requiring precise pressure monitoring.

  7. Does the MPXV5010GP require calibration?

    • Like most sensors, periodic calibration may be necessary to maintain accuracy, especially if used in critical or highly regulated applications.

  8. Can the MPXV5010GP be interfaced with microcontrollers?

    • Yes, the sensor's analog output can be easily interfaced with microcontrollers or analog-to-digital converters for digital processing and data acquisition.

  9. What is the power supply requirement for the MPXV5010GP?

    • The sensor typically operates on a 5V DC power supply, making it compatible with standard electronic systems.

  10. Is the MPXV5010GP sensitive to vibration or shock?

    • The sensor is designed to withstand typical mechanical vibrations and shocks encountered in its intended applications, but excessive force should be avoided to prevent damage.