NXP USA Inc.
Şəkil təsvir ola bilər.
Məhsul təfərrüatları üçün spesifikasiyalara baxın.
MPXV5050DP
Ətraflı Baxın Məlumat vərəqləri

MPXV5050DP

Introduction

The MPXV5050DP is a pressure sensor belonging to the category of integrated pressure sensors. It is commonly used for measuring absolute pressure in various applications. This entry provides an overview of the basic information, specifications, detailed pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models of the MPXV5050DP.

Basic Information Overview

  • Category: Integrated Pressure Sensor
  • Use: Measurement of Absolute Pressure
  • Characteristics: High Accuracy, Small Size, Low Power Consumption
  • Package: Dual Inline Package (DIP)
  • Essence: Accurate Pressure Sensing
  • Packaging/Quantity: Typically Packaged Individually

Specifications

  • Pressure Range: 0 to 50 kPa
  • Supply Voltage: 4.75 to 5.25 V
  • Output Type: Analog
  • Operating Temperature Range: -40°C to 125°C
  • Sensitivity: 45 mV/kPa
  • Accuracy: ±1.5% Full Scale Span (Typical)

Detailed Pin Configuration

The MPXV5050DP has a dual inline package with a total of 6 pins. The pin configuration is as follows: 1. Vout (Analog Output) 2. Vss (Ground) 3. Vsupply (Supply Voltage) 4. NC (No Connection) 5. NC (No Connection) 6. NC (No Connection)

Functional Features

  • High Accuracy: Provides precise pressure measurements.
  • Low Power Consumption: Suitable for battery-powered applications.
  • Small Size: Enables integration into compact designs.

Advantages and Disadvantages

Advantages

  • Accurate pressure sensing
  • Low power consumption
  • Small form factor

Disadvantages

  • Limited pressure range
  • Analog output requires additional signal conditioning

Working Principles

The MPXV5050DP utilizes piezoresistive technology to measure absolute pressure. When pressure is applied, the sensor's resistive elements change, resulting in a corresponding change in the analog output voltage.

Detailed Application Field Plans

The MPXV5050DP is suitable for various applications, including: - Medical Devices: Blood pressure monitors, respiratory equipment - Automotive: Engine control systems, tire pressure monitoring - Industrial Automation: HVAC systems, pneumatic controls

Detailed and Complete Alternative Models

Some alternative models to the MPXV5050DP include: - MPXV5010DP: Lower pressure range (0 to 10 kPa) - MPXV7002DP: Differential pressure sensor - MPX5700AP: Higher pressure range (0 to 700 kPa)

In conclusion, the MPXV5050DP is a versatile integrated pressure sensor with high accuracy and low power consumption, making it suitable for a wide range of applications.

Word Count: 410

Texniki həllərdə MPXV5050DP tətbiqi ilə bağlı 10 ümumi sual və cavabı sadalayın

  1. What is the MPXV5050DP?

    • The MPXV5050DP is a pressure sensor designed to measure absolute pressure in various applications.

  2. What is the operating voltage range of the MPXV5050DP?

    • The operating voltage range of the MPXV5050DP is typically 4.75V to 5.25V.

  3. What is the pressure range that the MPXV5050DP can measure?

    • The MPXV5050DP can measure pressure within the range of 0 to 50 kPa.

  4. How does the MPXV5050DP communicate with microcontrollers or other devices?

    • The MPXV5050DP typically communicates using an analog voltage output proportional to the measured pressure.

  5. What are the typical applications of the MPXV5050DP?

    • The MPXV5050DP is commonly used in medical devices, HVAC systems, and industrial automation for pressure monitoring and control.

  6. Is the MPXV5050DP suitable for measuring air or liquid pressure?

    • The MPXV5050DP is suitable for measuring both air and non-corrosive liquid pressures.

  7. What is the accuracy of the MPXV5050DP?

    • The MPXV5050DP has a typical accuracy of ±2.5% over the specified temperature range.

  8. Can the MPXV5050DP withstand harsh environmental conditions?

    • The MPXV5050DP is designed to operate within specified temperature and pressure ranges, but it may not be suitable for extreme environmental conditions without additional protection.

  9. Does the MPXV5050DP require calibration before use?

    • It is recommended to calibrate the MPXV5050DP according to the manufacturer's guidelines before use to ensure accurate measurements.

  10. Are there any special considerations for PCB layout when using the MPXV5050DP?

    • Proper PCB layout techniques, such as minimizing noise and ensuring proper grounding, should be followed to achieve optimal performance when using the MPXV5050DP.