NXP USA Inc.
Şəkil təsvir ola bilər.
Məhsul təfərrüatları üçün spesifikasiyalara baxın.
MPXV5050GP
Ətraflı Baxın Məlumat vərəqləri

MPXV5050GP

Introduction

The MPXV5050GP is a pressure sensor designed for use in various applications. This entry provides an overview of the product, including its category, use, characteristics, packaging, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.

Product Overview

  • Category: Pressure Sensor
  • Use: The MPXV5050GP is used to measure absolute air pressure in a variety of applications, including automotive, industrial, and consumer electronics.
  • Characteristics: This sensor is known for its high sensitivity, accuracy, and reliability. It operates on a single 5V supply and provides a ratiometric output signal.
  • Package: The MPXV5050GP is available in a small outline package (SOP) with a port for pressure connection.
  • Essence: The essence of this sensor lies in its ability to accurately measure air pressure and convert it into an electrical signal.
  • Packaging/Quantity: The sensor is typically sold individually or in small quantities suitable for prototyping and small-scale production.

Specifications

  • Pressure Range: 0 to 50 kPa
  • Supply Voltage: 4.75V to 5.25V
  • Output Type: Analog
  • Operating Temperature: -40°C to 125°C
  • Accuracy: ±2.5% Full Scale Span (typical)

Detailed Pin Configuration

The MPXV5050GP has a total of 6 pins: 1. Vout: Analog Output 2. Vss: Ground 3. V+: Supply Voltage 4. N/C: No Connection 5. N/C: No Connection 6. N/C: No Connection

Functional Features

  • High Sensitivity: The sensor provides a high sensitivity to changes in air pressure, making it suitable for precise measurements.
  • Ratiometric Output: The output signal varies proportionally with the supply voltage, allowing for easy interfacing with microcontrollers and analog-to-digital converters.

Advantages and Disadvantages

Advantages

  • High sensitivity
  • Ratiometric output
  • Wide operating temperature range

Disadvantages

  • Limited pressure range
  • Moderate accuracy compared to higher-end sensors

Working Principles

The MPXV5050GP utilizes a piezoresistive sensing element to detect changes in air pressure. When pressure is applied, the resistance of the sensing element changes, resulting in a corresponding change in the output voltage.

Detailed Application Field Plans

The MPXV5050GP is commonly used in the following applications: - Automotive: Engine control, exhaust gas recirculation (EGR) systems - Industrial: HVAC systems, pneumatic controls - Consumer Electronics: Smartphones, tablets (for altitude measurement)

Detailed and Complete Alternative Models

Some alternative models to the MPXV5050GP include: - MPXV5004GC: Similar performance with a lower pressure range - MPXV5010DP: Higher pressure range with comparable characteristics - MPXV7002DP: Dual-port sensor for differential pressure measurements

In conclusion, the MPXV5050GP is a versatile pressure sensor with a wide range of applications, offering high sensitivity and reliable performance within its specified pressure range.

Word Count: 498

Texniki həllərdə MPXV5050GP tətbiqi ilə bağlı 10 ümumi sual və cavabı sadalayın

  1. What is the MPXV5050GP pressure sensor used for?

    • The MPXV5050GP is commonly used to measure air or gas pressure in various technical solutions.

  2. What is the operating voltage range of the MPXV5050GP?

    • The operating voltage range of the MPXV5050GP is typically 4.75V to 5.25V.

  3. How does the MPXV5050GP communicate its pressure readings?

    • The MPXV5050GP outputs an analog voltage signal that is proportional to the pressure it measures.

  4. Can the MPXV5050GP be used for measuring liquid pressure?

    • No, the MPXV5050GP is specifically designed for air and gas pressure measurements.

  5. What is the pressure range that the MPXV5050GP can measure?

    • The MPXV5050GP can measure pressure within a range of 0 to 50 kPa (kilopascals).

  6. Is the MPXV5050GP suitable for high-temperature environments?

    • The MPXV5050GP has a temperature compensation feature that makes it suitable for use in a wide range of temperatures.

  7. What is the output format of the MPXV5050GP's pressure readings?

    • The MPXV5050GP provides a linear analog output, making it compatible with most microcontrollers and data acquisition systems.

  8. Does the MPXV5050GP require calibration before use?

    • The MPXV5050GP may require initial calibration to ensure accurate pressure readings in specific applications.

  9. Can the MPXV5050GP be used in medical devices?

    • The MPXV5050GP is not typically recommended for medical applications due to specific regulatory requirements for medical-grade sensors.

  10. What are some common applications of the MPXV5050GP in technical solutions?

    • The MPXV5050GP is often used in HVAC systems, pneumatic controls, industrial automation, and automotive applications for pressure monitoring and control.