NXP USA Inc.
Şəkil təsvir ola bilər.
Məhsul təfərrüatları üçün spesifikasiyalara baxın.
MPXV5100GC6U
Ətraflı Baxın Məlumat vərəqləri

MPXV5100GC6U

Introduction

The MPXV5100GC6U is a pressure sensor belonging to the category of integrated pressure sensors. It is commonly used for measuring absolute pressure in various applications. This entry provides an overview of the basic information, specifications, detailed pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models of the MPXV5100GC6U.

Basic Information Overview

  • Category: Integrated Pressure Sensor
  • Use: Measurement of Absolute Pressure
  • Characteristics: High Accuracy, Small Size, Low Power Consumption
  • Package: Surface Mount
  • Essence: Accurate Pressure Sensing
  • Packaging/Quantity: Tape & Reel (2500 units per reel)

Specifications

  • Pressure Range: 0 to 100 kPa
  • Supply Voltage: 4.75 to 5.25 V
  • Output Type: Analog
  • Operating Temperature Range: -40°C to 125°C
  • Sensitivity: 45 mV/kPa
  • Response Time: <1 ms

Detailed Pin Configuration

The MPXV5100GC6U has a total of 6 pins: 1. Vout (Analog Output) 2. Vss (Ground) 3. VDD (Supply Voltage) 4. N/C (No Connection) 5. N/C (No Connection) 6. N/C (No Connection)

Functional Features

  • High Accuracy: Provides precise pressure measurements
  • Small Size: Compact design for easy integration into various systems
  • Low Power Consumption: Energy-efficient operation

Advantages and Disadvantages

Advantages

  • Accurate pressure sensing
  • Small form factor
  • Low power consumption

Disadvantages

  • Limited pressure range
  • Analog output may require additional signal conditioning

Working Principles

The MPXV5100GC6U utilizes piezoresistive technology to measure absolute pressure. When pressure is applied, the sensor's resistive elements change, resulting in a corresponding change in the output voltage. This voltage is proportional to the applied pressure and can be calibrated to provide accurate pressure readings.

Detailed Application Field Plans

The MPXV5100GC6U is suitable for a wide range of applications, including: - Medical Devices: Blood pressure monitors, respiratory equipment - Automotive: Engine control, tire pressure monitoring - Industrial Automation: Hydraulic systems, pneumatic controls - Consumer Electronics: Smartphones, wearables

Detailed and Complete Alternative Models

Some alternative models to the MPXV5100GC6U include: - MPXV5010GC6U: Similar performance with a lower pressure range - MPX5700AP: Higher pressure range with digital output - MPX2200AP: Lower cost option with comparable accuracy

In conclusion, the MPXV5100GC6U is a versatile integrated pressure sensor with high accuracy and small form factor, making it suitable for various applications requiring precise pressure measurements.

(Word count: 498)

Texniki həllərdə MPXV5100GC6U tətbiqi ilə bağlı 10 ümumi sual və cavabı sadalayın

  1. What is the MPXV5100GC6U?

    • The MPXV5100GC6U is a pressure sensor designed to measure absolute pressure in various applications.

  2. What is the operating voltage range of the MPXV5100GC6U?

    • The operating voltage range of the MPXV5100GC6U is typically 4.75V to 5.25V.

  3. What is the pressure range that the MPXV5100GC6U can measure?

    • The MPXV5100GC6U can measure pressure within a range of 0 to 100 kPa (0 to 14.5 psi).

  4. How does the MPXV5100GC6U communicate with microcontrollers or other devices?

    • The MPXV5100GC6U communicates using an analog output signal, typically a ratiometric voltage output.

  5. What are the typical applications for the MPXV5100GC6U?

    • Typical applications include medical instrumentation, HVAC control, and industrial automation.

  6. What is the accuracy of the MPXV5100GC6U?

    • The accuracy of the MPXV5100GC6U is typically within ±1.5% over the specified temperature range.

  7. Can the MPXV5100GC6U be used in harsh environments?

    • Yes, the MPXV5100GC6U is designed to be used in harsh environments and can withstand certain levels of moisture and dust.

  8. Is the MPXV5100GC6U suitable for battery-powered applications?

    • Yes, the MPXV5100GC6U has low power consumption and can be suitable for battery-powered applications.

  9. What is the response time of the MPXV5100GC6U?

    • The response time of the MPXV5100GC6U is typically less than 1 millisecond.

  10. Does the MPXV5100GC6U require external calibration?

    • The MPXV5100GC6U is factory calibrated and typically does not require external calibration. However, it's recommended to verify its performance in the specific application.