ON Semiconductor
Şəkil təsvir ola bilər.
Məhsul təfərrüatları üçün spesifikasiyalara baxın.
NTD4804N-35G
Ətraflı Baxın Məlumat vərəqləri

NTD4804N-35G

Product Overview

Category

The NTD4804N-35G belongs to the category of power MOSFETs.

Use

It is used for high-power switching applications in various electronic circuits and systems.

Characteristics

  • High voltage capability
  • Low on-resistance
  • Fast switching speed
  • Low gate charge

Package

The NTD4804N-35G is typically available in a TO-252 (DPAK) package.

Essence

This product is essential for efficient power management and control in electronic devices and systems.

Packaging/Quantity

The NTD4804N-35G is usually packaged in reels or tubes, with quantities varying based on manufacturer specifications.

Specifications

  • Drain-Source Voltage (VDS): 40V
  • Continuous Drain Current (ID): 60A
  • On-Resistance (RDS(on)): 3.5mΩ
  • Gate-Source Voltage (VGS): ±20V
  • Total Gate Charge (Qg): 50nC
  • Operating Temperature Range: -55°C to 175°C

Detailed Pin Configuration

The NTD4804N-35G typically has three pins: 1. Gate (G) 2. Drain (D) 3. Source (S)

Functional Features

  • High voltage capability allows for use in various power applications.
  • Low on-resistance minimizes power losses and improves efficiency.
  • Fast switching speed enables rapid control of power flow.

Advantages and Disadvantages

Advantages

  • High voltage capability
  • Low on-resistance
  • Fast switching speed

Disadvantages

  • Sensitivity to static electricity
  • Limited maximum operating temperature

Working Principles

The NTD4804N-35G operates based on the principles of field-effect transistors, where the voltage applied to the gate terminal controls the flow of current between the drain and source terminals.

Detailed Application Field Plans

The NTD4804N-35G is commonly used in the following applications: - Power supplies - Motor control - DC-DC converters - Inverters

Detailed and Complete Alternative Models

Some alternative models to the NTD4804N-35G include: - IRF4905PbF - FDP8878 - AOD4184

In conclusion, the NTD4804N-35G power MOSFET offers high voltage capability, low on-resistance, and fast switching speed, making it suitable for a wide range of power management applications. However, its sensitivity to static electricity and limited maximum operating temperature should be considered when designing with this component.

[Word Count: 345]

Texniki həllərdə NTD4804N-35G tətbiqi ilə bağlı 10 ümumi sual və cavabı sadalayın

  1. What is the NTD4804N-35G?

    • The NTD4804N-35G is a high-voltage, high-current N-channel Power MOSFET designed for various technical solutions requiring efficient power management.

  2. What are the key specifications of the NTD4804N-35G?

    • The NTD4804N-35G features a voltage rating of 40V, a continuous drain current of 160A, and a low on-resistance for high efficiency.

  3. In what applications can the NTD4804N-35G be used?

    • This MOSFET is commonly used in applications such as motor control, power supplies, and DC-DC converters due to its high current and voltage capabilities.

  4. What are the thermal characteristics of the NTD4804N-35G?

    • The NTD4804N-35G has low thermal resistance and is designed to efficiently dissipate heat, making it suitable for high-power applications.

  5. Does the NTD4804N-35G require any special driving considerations?

    • It is recommended to use proper gate driving techniques to ensure fast switching and minimize power losses in high-frequency applications.

  6. What protection features does the NTD4804N-35G offer?

    • The NTD4804N-35G provides built-in protection against overcurrent, overvoltage, and thermal overload, enhancing system reliability.

  7. Can the NTD4804N-35G be used in automotive applications?

    • Yes, this MOSFET is suitable for automotive systems such as electric power steering, battery management, and traction control due to its robust design.

  8. Are there any application notes or reference designs available for the NTD4804N-35G?

    • Yes, application notes and reference designs are available to assist with the implementation of the NTD4804N-35G in various technical solutions.

  9. What are the advantages of using the NTD4804N-35G in power electronics?

    • The NTD4804N-35G offers low conduction and switching losses, high efficiency, and excellent ruggedness, making it ideal for demanding power electronic applications.

  10. Where can I find detailed technical documentation for the NTD4804N-35G?

    • Detailed technical specifications, datasheets, and application information for the NTD4804N-35G can be found on the manufacturer's website or through authorized distributors.