ON Semiconductor
Şəkil təsvir ola bilər.
Məhsul təfərrüatları üçün spesifikasiyalara baxın.
NTHD5904NT3
Ətraflı Baxın Məlumat vərəqləri

NTHD5904NT3

Product Overview

Category

The NTHD5904NT3 belongs to the category of high-speed, low-side power switches.

Use

It is commonly used for controlling inductive loads in automotive and industrial applications.

Characteristics

  • High-speed switching capability
  • Low on-resistance
  • Overcurrent protection
  • Thermal shutdown protection

Package

The NTHD5904NT3 is available in a compact and robust DPAK (TO-252) package.

Essence

This product is essential for efficient and reliable control of inductive loads in various electronic systems.

Packaging/Quantity

It is typically packaged in reels with a quantity of 2500 units per reel.

Specifications

  • Maximum Continuous Drain Current: 10A
  • On-State Resistance: 50mΩ
  • Input Voltage Range: 5V to 18V
  • Operating Temperature Range: -40°C to 150°C

Detailed Pin Configuration

The NTHD5904NT3 has a standard pin configuration with three pins: 1. Gate (G) 2. Drain (D) 3. Source (S)

Functional Features

  • Fast switching speed
  • Built-in protection features for enhanced reliability
  • Low power dissipation
  • Compatibility with microcontroller outputs

Advantages and Disadvantages

Advantages

  • High-speed switching reduces switching losses
  • Integrated protection enhances system robustness
  • Low on-resistance minimizes power dissipation

Disadvantages

  • Limited maximum continuous drain current compared to some alternative models
  • Higher cost compared to traditional discrete solutions

Working Principles

The NTHD5904NT3 operates by controlling the flow of current through the inductive load based on the input signal applied to the gate pin. When the gate-source voltage exceeds the threshold, the device turns on, allowing current to flow from the drain to the source.

Detailed Application Field Plans

Automotive Applications

  • Electronic fuel injection systems
  • Transmission control modules
  • Electric power steering systems

Industrial Applications

  • Motor control in robotics
  • HVAC systems
  • Industrial automation equipment

Detailed and Complete Alternative Models

Some alternative models to the NTHD5904NT3 include: - NTHD5901NT1 - NTHD5902NT2 - NTHD5903NT3

These alternatives offer similar functionality with variations in specifications and package options.

In conclusion, the NTHD5904NT3 is a high-speed, low-side power switch designed for efficient and reliable control of inductive loads in automotive and industrial applications. Its integrated protection features, fast switching speed, and low on-resistance make it a valuable component in electronic systems requiring precise current control.

[Word Count: 410]

Texniki həllərdə NTHD5904NT3 tətbiqi ilə bağlı 10 ümumi sual və cavabı sadalayın

  1. What is NTHD5904NT3?

    • NTHD5904NT3 is a high-speed, low-power, quad differential line driver designed for applications requiring high data rates and minimal power consumption.

  2. What are the key features of NTHD5904NT3?

    • The key features include high-speed operation, low power consumption, quad differential outputs, and wide operating voltage range.

  3. What is the typical application of NTHD5904NT3?

    • NTHD5904NT3 is commonly used in applications such as high-speed data transmission, industrial automation, and communication systems.

  4. What is the operating voltage range of NTHD5904NT3?

    • The operating voltage range is typically from 3.0V to 3.6V.

  5. What is the maximum data rate supported by NTHD5904NT3?

    • NTHD5904NT3 supports data rates of up to 3.125Gbps per channel.

  6. Does NTHD5904NT3 have built-in protection features?

    • Yes, it includes built-in ESD protection and thermal shutdown protection.

  7. Can NTHD5904NT3 be used in automotive applications?

    • Yes, it is suitable for automotive applications due to its robustness and reliability.

  8. What is the package type of NTHD5904NT3?

    • It is available in a small footprint, lead-free QFN package.

  9. Is NTHD5904NT3 compatible with standard industry interfaces?

    • Yes, it is compatible with various industry-standard interfaces such as LVDS, M-LVDS, and others.

  10. Where can I find more detailed technical information about NTHD5904NT3?

    • Detailed technical information can be found in the product datasheet provided by the manufacturer or on their official website.