ON Semiconductor
Şəkil təsvir ola bilər.
Məhsul təfərrüatları üçün spesifikasiyalara baxın.
NTMFS4935NCT1G
Ətraflı Baxın Məlumat vərəqləri

NTMFS4935NCT1G

Product Overview

Category

The NTMFS4935NCT1G belongs to the category of power MOSFETs.

Use

It is commonly used in power management applications, such as voltage regulation and power switching.

Characteristics

  • High efficiency
  • Low on-resistance
  • Fast switching speed
  • Low gate charge

Package

The NTMFS4935NCT1G is typically available in a small footprint, surface-mount package.

Essence

This MOSFET is essential for efficient power control and management in various electronic devices and systems.

Packaging/Quantity

It is usually packaged in reels with a specific quantity per reel, typically 3000 or 5000 units per reel.

Specifications

  • Drain-Source Voltage (VDS): [specification]
  • Continuous Drain Current (ID): [specification]
  • On-Resistance (RDS(on)): [specification]
  • Gate-Source Voltage (VGS): [specification]
  • Power Dissipation (PD): [specification]

Detailed Pin Configuration

The NTMFS4935NCT1G has a standard pin configuration with clearly defined drain, source, and gate terminals. It is important to refer to the datasheet for the exact pinout and layout.

Functional Features

  • Low power dissipation
  • High current handling capability
  • Enhanced thermal performance
  • Compatibility with low-voltage control signals

Advantages

  • High efficiency leading to reduced power losses
  • Fast switching speed enabling high-frequency operation
  • Compact package size for space-constrained designs
  • Suitable for both low-side and high-side configurations

Disadvantages

  • Sensitivity to static electricity
  • Limited voltage and current ratings compared to some higher-power MOSFETs
  • Higher cost compared to standard bipolar junction transistors (BJTs)

Working Principles

The NTMFS4935NCT1G operates based on the principles of field-effect transistors, utilizing the electric field at the gate terminal to control the flow of current between the drain and source terminals.

Detailed Application Field Plans

The NTMFS4935NCT1G is widely used in: - Switching power supplies - DC-DC converters - Motor control circuits - Battery management systems - LED lighting applications

Detailed and Complete Alternative Models

  • NTMFS4936NCT1G
  • NTMFS4937NCT1G
  • NTMFS4938NCT1G
  • NTMFS4939NCT1G

These alternative models offer similar performance characteristics and can be used as substitutes depending on specific design requirements.

Note: The specifications, pin configuration, and alternative models should be filled in with the actual data from the product datasheet to complete the entry.

[Word count: 439]

Texniki həllərdə NTMFS4935NCT1G tətbiqi ilə bağlı 10 ümumi sual və cavabı sadalayın

  1. What is the NTMFS4935NCT1G?

    • The NTMFS4935NCT1G is a power MOSFET designed for use in high-performance applications, offering low on-resistance and high current-handling capabilities.

  2. What are the key features of the NTMFS4935NCT1G?

    • The key features include a low on-resistance, high current-handling capability, and a small form factor, making it suitable for space-constrained designs.

  3. In what technical solutions can the NTMFS4935NCT1G be used?

    • The NTMFS4935NCT1G can be used in various technical solutions such as power supplies, motor control, battery management, and LED lighting applications.

  4. What is the maximum current rating of the NTMFS4935NCT1G?

    • The NTMFS4935NCT1G has a maximum current rating of [insert value] amps, making it suitable for high-power applications.

  5. What is the voltage rating of the NTMFS4935NCT1G?

    • The NTMFS4935NCT1G has a voltage rating of [insert value] volts, allowing it to be used in both low and high voltage applications.

  6. Does the NTMFS4935NCT1G require a heatsink?

    • Depending on the application and power dissipation, a heatsink may be required for the NTMFS4935NCT1G to ensure optimal thermal performance.

  7. What are the recommended operating conditions for the NTMFS4935NCT1G?

    • The recommended operating conditions typically include a specified range of voltages, currents, and temperatures to ensure reliable performance.

  8. Is the NTMFS4935NCT1G RoHS compliant?

    • Yes, the NTMFS4935NCT1G is RoHS compliant, meeting environmental standards for lead-free and hazardous substance-free manufacturing.

  9. Are there any application notes or reference designs available for the NTMFS4935NCT1G?

    • Yes, the manufacturer provides application notes and reference designs to assist with the integration of the NTMFS4935NCT1G into various technical solutions.

  10. Where can I find detailed specifications and datasheets for the NTMFS4935NCT1G?

    • Detailed specifications and datasheets for the NTMFS4935NCT1G can be found on the manufacturer's website or through authorized distributors.