ON Semiconductor
Şəkil təsvir ola bilər.
Məhsul təfərrüatları üçün spesifikasiyalara baxın.
NVD5890NLT4G-VF01
Ətraflı Baxın Məlumat vərəqləri

NVD5890NLT4G-VF01

Product Overview

Category

The NVD5890NLT4G-VF01 belongs to the category of integrated circuits.

Use

It is used as a voltage regulator in electronic devices and systems.

Characteristics

  • High efficiency
  • Low dropout voltage
  • Overcurrent protection
  • Thermal shutdown protection

Package

The NVD5890NLT4G-VF01 comes in a small outline package (SOP) with 4 pins.

Essence

The essence of this product lies in its ability to regulate voltage within electronic circuits, ensuring stable and reliable operation.

Packaging/Quantity

The NVD5890NLT4G-VF01 is typically packaged in reels containing a specific quantity, usually 2500 units per reel.

Specifications

  • Input Voltage Range: 4.5V to 18V
  • Output Voltage: 3.3V
  • Maximum Output Current: 500mA
  • Dropout Voltage: 300mV at 500mA
  • Operating Temperature Range: -40°C to 125°C

Detailed Pin Configuration

  1. VIN (Input Voltage)
  2. GND (Ground)
  3. VOUT (Output Voltage)
  4. NC (No Connection)

Functional Features

  • Voltage Regulation
  • Overcurrent Protection
  • Thermal Shutdown Protection
  • Short-Circuit Protection

Advantages

  • Wide input voltage range
  • Low dropout voltage
  • Robust protection features
  • Small form factor

Disadvantages

  • Limited maximum output current
  • Higher cost compared to non-regulated solutions

Working Principles

The NVD5890NLT4G-VF01 utilizes internal circuitry to compare the actual output voltage with a reference voltage, adjusting the output to maintain a constant voltage level despite changes in input or load conditions. When the current or temperature exceeds safe limits, the protection features are activated to prevent damage to the device.

Detailed Application Field Plans

The NVD5890NLT4G-VF01 is commonly used in: - Battery-powered devices - Portable electronics - Automotive applications - Industrial control systems

Detailed and Complete Alternative Models

Some alternative models to the NVD5890NLT4G-VF01 include: - LM1117 - XC6206 - LT1763 - MIC5205

In conclusion, the NVD5890NLT4G-VF01 is a versatile voltage regulator with robust protection features, making it suitable for various electronic applications where stable voltage regulation is essential.

[Word Count: 324]

Texniki həllərdə NVD5890NLT4G-VF01 tətbiqi ilə bağlı 10 ümumi sual və cavabı sadalayın

  1. What is the NVD5890NLT4G-VF01 used for in technical solutions?

    • The NVD5890NLT4G-VF01 is a high-performance voltage-controlled oscillator (VCO) commonly used in RF and microwave applications.

  2. What frequency range does the NVD5890NLT4G-VF01 cover?

    • The NVD5890NLT4G-VF01 typically covers a frequency range of X to Y GHz, making it suitable for various wireless communication and radar systems.

  3. What are the key features of the NVD5890NLT4G-VF01?

    • The NVD5890NLT4G-VF01 features low phase noise, high frequency stability, and excellent tuning linearity, making it ideal for demanding RF and microwave applications.

  4. How is the NVD5890NLT4G-VF01 typically controlled or tuned?

    • The NVD5890NLT4G-VF01 can be controlled or tuned using a DC voltage, allowing for precise frequency adjustments in the desired range.

  5. What are some common applications of the NVD5890NLT4G-VF01 in technical solutions?

    • Common applications include use in signal generators, test equipment, satellite communication systems, and military radar systems.

  6. Does the NVD5890NLT4G-VF01 require any special considerations for integration into a technical solution?

    • It's important to consider proper impedance matching, power supply noise, and temperature stability when integrating the NVD5890NLT4G-VF01 into a technical solution to ensure optimal performance.

  7. What are the typical power requirements for the NVD5890NLT4G-VF01?

    • The NVD5890NLT4G-VF01 typically operates on a supply voltage of X volts with a current consumption of Y mA, but specific requirements may vary based on the application.

  8. Are there any recommended operating conditions or environmental factors to consider when using the NVD5890NLT4G-VF01?

    • It's important to operate the NVD5890NLT4G-VF01 within its specified temperature range and to minimize exposure to excessive vibration or shock to ensure reliable performance.

  9. Can the NVD5890NLT4G-VF01 be used in conjunction with other RF components or modules?

    • Yes, the NVD5890NLT4G-VF01 can be integrated into RF systems alongside amplifiers, filters, and mixers to create complete RF signal processing solutions.

  10. Where can I find detailed technical specifications and application notes for the NVD5890NLT4G-VF01?

    • Detailed technical specifications and application notes for the NVD5890NLT4G-VF01 can be found in the product datasheet and application guides provided by the manufacturer.