ON Semiconductor
Şəkil təsvir ola bilər.
Məhsul təfərrüatları üçün spesifikasiyalara baxın.
NVGS4141NT1G
Ətraflı Baxın Məlumat vərəqləri

NVGS4141NT1G

Product Overview

The NVGS4141NT1G belongs to the category of semiconductor devices and is commonly used as a voltage level translator. It is characterized by its high-speed operation, low power consumption, and compact package design. The essence of this product lies in its ability to facilitate seamless communication between devices operating at different voltage levels. The NVGS4141NT1G is typically available in small surface-mount packages and is often sold in reels or tubes containing a specific quantity of units.

Specifications

  • Input Voltage Range: 0.7V to 5.5V
  • Output Voltage Range: 0.7V to 5.5V
  • Maximum Data Rate: 100 Mbps
  • Operating Temperature Range: -40°C to 125°C
  • Package Type: SOT-553

Detailed Pin Configuration

The NVGS4141NT1G features a total of six pins, with each pin serving a specific function. The detailed pin configuration is as follows: 1. A1: VCCA (Input Voltage A) 2. A2: GND (Ground) 3. A3: B1 (Output Voltage B) 4. B3: VCCB (Input Voltage B) 5. B2: OE (Output Enable) 6. B4: B2 (Output Voltage B)

Functional Features

  • Bidirectional Voltage Translation
  • Automatic Direction Sensing
  • Low Standby Current
  • High-Speed Operation

Advantages and Disadvantages

Advantages

  • Wide Input Voltage Range
  • Small Package Size
  • High-Speed Data Transmission

Disadvantages

  • Limited Maximum Data Rate
  • Sensitive to Electrostatic Discharge

Working Principles

The NVGS4141NT1G operates by utilizing a combination of MOSFET and CMOS technology to achieve bidirectional voltage translation. When the OE pin is enabled, the device automatically senses the direction of data flow and translates the voltage levels accordingly. This enables seamless communication between devices operating at different voltage domains.

Detailed Application Field Plans

The NVGS4141NT1G finds extensive application in various electronic systems, including but not limited to: - I2C, SMBus, and PMBus Level Translation - Battery-Powered Equipment - Consumer Electronics - Industrial Control Systems

Detailed and Complete Alternative Models

Some alternative models that can be considered as substitutes for the NVGS4141NT1G include: - TXS0102 - SN74LVC1T45 - PCA9306

In conclusion, the NVGS4141NT1G serves as a crucial component in modern electronic systems, enabling seamless voltage level translation and facilitating interoperability between devices operating at different voltage domains.

[Word Count: 387]

Texniki həllərdə NVGS4141NT1G tətbiqi ilə bağlı 10 ümumi sual və cavabı sadalayın

  1. What is NVGS4141NT1G?

    • NVGS4141NT1G is a high-performance, low capacitance TVS (transient voltage suppressor) diode designed to protect sensitive electronics from voltage transients and ESD (electrostatic discharge).

  2. What are the key features of NVGS4141NT1G?

    • The key features include low capacitance, low clamping voltage, high surge capability, and compatibility with high-speed data interfaces.

  3. In what applications can NVGS4141NT1G be used?

    • NVGS4141NT1G is commonly used in applications such as USB ports, HDMI interfaces, Ethernet ports, and other high-speed data lines to protect against transient voltage events.

  4. What is the maximum clamping voltage of NVGS4141NT1G?

    • The maximum clamping voltage of NVGS4141NT1G is typically very low, providing effective protection for sensitive electronic components.

  5. How does NVGS4141NT1G help in protecting electronic devices?

    • NVGS4141NT1G diverts transient currents away from sensitive components, preventing damage from voltage spikes and ESD events.

  6. Is NVGS4141NT1G suitable for high-speed data applications?

    • Yes, NVGS4141NT1G is designed to be compatible with high-speed data interfaces, offering low capacitance to minimize signal distortion.

  7. What is the operating temperature range of NVGS4141NT1G?

    • NVGS4141NT1G typically operates within a wide temperature range, making it suitable for various environmental conditions.

  8. Can NVGS4141NT1G be used in automotive applications?

    • Yes, NVGS4141NT1G is often used in automotive electronics to protect against voltage transients and ESD in vehicle systems.

  9. Does NVGS4141NT1G comply with industry standards for surge protection?

    • Yes, NVGS4141NT1G is designed to meet industry standards for surge protection, ensuring reliable performance in demanding applications.

  10. Where can I find detailed technical specifications for NVGS4141NT1G?

    • Detailed technical specifications for NVGS4141NT1G can be found in the product datasheet provided by the manufacturer or distributor.