ON Semiconductor
Şəkil təsvir ola bilər.
Məhsul təfərrüatları üçün spesifikasiyalara baxın.
STD110N02RT4G-VF01
Ətraflı Baxın Məlumat vərəqləri

STD110N02RT4G-VF01

Product Overview

Category

The STD110N02RT4G-VF01 belongs to the category of power MOSFETs.

Use

It is commonly used in electronic circuits for switching and amplification purposes, particularly in power management applications.

Characteristics

  • Low on-state resistance
  • High current capability
  • Fast switching speed
  • Low gate charge

Package

The STD110N02RT4G-VF01 is typically available in a TO-252 package.

Essence

This MOSFET is essential for efficient power control and management in various electronic devices and systems.

Packaging/Quantity

The STD110N02RT4G-VF01 is usually packaged in reels with a quantity of 2500 units per reel.

Specifications

  • Drain-Source Voltage (VDS): 24V
  • Continuous Drain Current (ID): 110A
  • RDS(ON) Max: 2.8mΩ
  • Power Dissipation (PD): 130W
  • Gate-Source Voltage (VGS): ±20V
  • Operating Temperature Range: -55°C to 175°C

Detailed Pin Configuration

The STD110N02RT4G-VF01 has three pins: 1. Gate (G) 2. Drain (D) 3. Source (S)

Functional Features

  • Low on-state resistance for minimal power loss
  • High current-carrying capability for efficient power handling
  • Fast switching speed for improved performance in switching applications
  • Low gate charge for reduced drive requirements

Advantages

  • High efficiency in power management applications
  • Suitable for high-current circuits
  • Fast response time for rapid switching operations

Disadvantages

  • May require careful consideration of heat dissipation due to high power dissipation
  • Sensitivity to static discharge requires proper handling during assembly

Working Principles

The STD110N02RT4G-VF01 operates based on the principles of field-effect transistors, where the voltage applied to the gate terminal controls the flow of current between the drain and source terminals. When a sufficient voltage is applied to the gate, the MOSFET allows current to flow through, enabling its use in various electronic circuits for power control and amplification.

Detailed Application Field Plans

The STD110N02RT4G-VF01 is widely used in: - Switch-mode power supplies - Motor control systems - Battery management systems - LED lighting applications - Audio amplifiers

Detailed and Complete Alternative Models

Some alternative models to the STD110N02RT4G-VF01 include: - STP110N8F7AG - IRF3205 - FDP8878

In conclusion, the STD110N02RT4G-VF01 power MOSFET offers high-performance characteristics suitable for a wide range of power management applications, making it an essential component in modern electronic systems.

Word Count: 411

Texniki həllərdə STD110N02RT4G-VF01 tətbiqi ilə bağlı 10 ümumi sual və cavabı sadalayın

  1. What is the maximum drain-source voltage rating of STD110N02RT4G-VF01?

    • The maximum drain-source voltage rating of STD110N02RT4G-VF01 is 24V.

  2. What is the continuous drain current rating of STD110N02RT4G-VF01?

    • The continuous drain current rating of STD110N02RT4G-VF01 is 110A.

  3. What is the on-resistance (RDS(on)) of STD110N02RT4G-VF01?

    • The on-resistance (RDS(on)) of STD110N02RT4G-VF01 is typically 2.5mΩ at VGS = 10V.

  4. What is the gate threshold voltage of STD110N02RT4G-VF01?

    • The gate threshold voltage of STD110N02RT4G-VF01 is typically 2V.

  5. What is the power dissipation of STD110N02RT4G-VF01?

    • The power dissipation of STD110N02RT4G-VF01 is 200W.

  6. What are the typical applications for STD110N02RT4G-VF01?

    • STD110N02RT4G-VF01 is commonly used in motor control, battery protection, and power management applications.

  7. What is the operating temperature range of STD110N02RT4G-VF01?

    • The operating temperature range of STD110N02RT4G-VF01 is -55°C to 175°C.

  8. Does STD110N02RT4G-VF01 require a heat sink for operation?

    • Depending on the application and power dissipation, a heat sink may be required for optimal performance of STD110N02RT4G-VF01.

  9. Is STD110N02RT4G-VF01 suitable for automotive applications?

    • Yes, STD110N02RT4G-VF01 is suitable for automotive applications due to its high current and voltage ratings.

  10. What are the recommended PCB layout guidelines for using STD110N02RT4G-VF01?

    • It is recommended to follow the manufacturer's guidelines for PCB layout, including proper thermal management and minimizing parasitic inductance and resistance in the circuit.