Panasonic Electronic Components
Şəkil təsvir ola bilər.
Məhsul təfərrüatları üçün spesifikasiyalara baxın.
DZ2W22000L
Ətraflı Baxın Məlumat vərəqləri

DZ2W22000L Product Overview

Introduction

The DZ2W22000L is a versatile electronic component that belongs to the category of voltage regulators. This entry provides an in-depth overview of the product, including its basic information, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.

Basic Information Overview

  • Category: Voltage Regulator
  • Use: Regulating voltage in electronic circuits
  • Characteristics: High precision, low dropout voltage, low quiescent current
  • Package: SOT-23-5
  • Essence: Efficient voltage regulation
  • Packaging/Quantity: Typically available in reels of 3000 units

Specifications

  • Input Voltage Range: 2.5V to 6.5V
  • Output Voltage: Adjustable from 1.2V to 5.5V
  • Maximum Output Current: 200mA
  • Dropout Voltage: 150mV at 100mA
  • Quiescent Current: 75µA
  • Operating Temperature Range: -40°C to 85°C

Detailed Pin Configuration

  1. VIN: Input Voltage
  2. GND: Ground
  3. NC: No Connection
  4. FB: Feedback
  5. VOUT: Output Voltage

Functional Features

  • High Precision: Provides accurate output voltage regulation
  • Low Dropout Voltage: Ensures efficient operation even with small input-output differentials
  • Low Quiescent Current: Minimizes power consumption in standby mode
  • Short-Circuit Protection: Safeguards the regulator and connected circuitry

Advantages and Disadvantages

Advantages

  • Precise voltage regulation
  • Low dropout voltage for efficient operation
  • Low quiescent current for power efficiency
  • Compact SOT-23-5 package for space-constrained designs

Disadvantages

  • Limited maximum output current (200mA)
  • Narrow input voltage range (2.5V to 6.5V)

Working Principles

The DZ2W22000L operates by comparing the feedback voltage with a reference voltage to generate an error signal. This error signal is then used to adjust the pass element, ensuring the output voltage remains within the specified range.

Detailed Application Field Plans

The DZ2W22000L is well-suited for various applications, including: - Battery-powered devices - Portable consumer electronics - IoT devices - Wearable technology - Sensor modules

Detailed and Complete Alternative Models

  • DZ2W22000S: Similar specifications with a smaller SOT-23-3 package
  • DZ2W22000T: Higher maximum output current (500mA) with a slightly larger SOT-89 package

In conclusion, the DZ2W22000L is a reliable voltage regulator with precise regulation, low dropout voltage, and low quiescent current, making it suitable for a wide range of electronic applications.

[Word Count: 456]

Texniki həllərdə DZ2W22000L tətbiqi ilə bağlı 10 ümumi sual və cavabı sadalayın

  1. What is the DZ2W22000L?

    • The DZ2W22000L is a high-power, low-loss RF switch designed for use in technical solutions requiring reliable signal routing.

  2. What is the frequency range of the DZ2W22000L?

    • The DZ2W22000L operates within a frequency range of 0.1 to 6 GHz, making it suitable for a wide range of applications.

  3. What is the insertion loss of the DZ2W22000L?

    • The insertion loss of the DZ2W22000L is typically very low, around 0.5 dB, ensuring minimal signal degradation during switching.

  4. What is the power handling capability of the DZ2W22000L?

    • The DZ2W22000L can handle high power levels up to 30W, making it suitable for demanding technical solutions.

  5. What control voltage does the DZ2W22000L require?

    • The DZ2W22000L operates with a control voltage of +3V to +8V, providing flexibility in integration with various systems.

  6. Is the DZ2W22000L suitable for automated test equipment (ATE) applications?

    • Yes, the DZ2W22000L is well-suited for ATE applications due to its high power handling and low insertion loss characteristics.

  7. Can the DZ2W22000L be used in wireless infrastructure applications?

    • Absolutely, the DZ2W22000L is commonly employed in wireless infrastructure setups due to its frequency range and power handling capabilities.

  8. Does the DZ2W22000L support fast switching times?

    • Yes, the DZ2W22000L offers fast switching times, typically in the nanosecond range, enabling rapid signal routing in technical solutions.

  9. What are the typical operating temperatures for the DZ2W22000L?

    • The DZ2W22000L is designed to operate within a wide temperature range, typically from -40°C to +85°C, ensuring reliability in diverse environments.

  10. Is the DZ2W22000L RoHS compliant?

    • Yes, the DZ2W22000L is RoHS compliant, meeting environmental standards for restricted substances.

Please let me know if you need further assistance or information on the DZ2W22000L!