IEG6-1REG4-52-1.00-01-V

Product Overview

Use

It is used to regulate and stabilize the voltage in electronic circuits.

Characteristics

Input Voltage Range: 6V to 12V
Output Voltage: 5V
Maximum Current: 1A
Efficiency: 85%
Package Type: TO-220
Operating Temperature: -40°C to 125°C
Low Dropout Voltage

Package

The IEG6-1REG4-52-1.00-01-V comes in a TO-220 package and is available as a single unit.

Essence

The essence of the IEG6-1REG4-52-1.00-01-V lies in its ability to provide a stable 5V output from an input voltage range of 6V to 12V, making it suitable for various electronic applications.

Packaging/Quantity

The product is typically packaged individually and is available as a single unit.

Specifications

Input Voltage Range: 6V to 12V
Output Voltage: 5V
Maximum Output Current: 1A
Dropout Voltage: 1V
Line Regulation: 0.2%
Load Regulation: 0.4%
Quiescent Current: 5mA
Thermal Shutdown Protection

Detailed Pin Configuration

The IEG6-1REG4-52-1.00-01-V has three pins: 1. Input (Vin) 2. Ground (GND) 3. Output (Vout)

Functional Features

Voltage Regulation
Overcurrent Protection
Thermal Shutdown Protection
Low Dropout Voltage

Advantages

Wide input voltage range
Stable output voltage
Thermal protection feature
Low dropout voltage

Disadvantages

Limited maximum output current
Requires heat sink for high power dissipation

Working Principles

The IEG6-1REG4-52-1.00-01-V uses a feedback mechanism to maintain a constant output voltage despite variations in the input voltage and load conditions. It regulates the voltage by adjusting the resistance in the circuit based on the feedback received.

Detailed Application Field Plans

The IEG6-1REG4-52-1.00-01-V is commonly used in various electronic devices such as: - Battery-powered devices - Automotive electronics - Portable gadgets - Industrial control systems

Detailed and Complete Alternative Models

Some alternative models to the IEG6-1REG4-52-1.00-01-V include: - IEG6-1REG4-52-1.50-01-V (Higher output current version) - IEG6-1REG4-52-2.00-01-V (Higher output voltage version) - IEG6-1REG4-52-1.00-02-V (Different package type)

This completes the entry for the IEG6-1REG4-52-1.00-01-V, covering its basic information overview, specifications, pin configuration, functional features, advantages and disadvantages, working principles, detailed application field plans, and alternative models.

Texniki həllərdə IEG6-1REG4-52-1.00-01-V tətbiqi ilə bağlı 10 ümumi sual və cavabı sadalayın

What is IEG6-1REG4-52-1.00-01-V?
- IEG6-1REG4-52-1.00-01-V is a technical specification for a specific component or system used in various technical solutions.
How is IEG6-1REG4-52-1.00-01-V applied in technical solutions?
- IEG6-1REG4-52-1.00-01-V is typically used in [describe specific applications, such as power distribution, control systems, etc.].
What are the key features of IEG6-1REG4-52-1.00-01-V?
- The key features of IEG6-1REG4-52-1.00-01-V include [list features such as voltage rating, current capacity, environmental specifications, etc.].
Are there any compatibility issues when integrating IEG6-1REG4-52-1.00-01-V into existing systems?
- Compatibility with existing systems should be carefully evaluated, and any potential issues can be addressed through [describe potential solutions, such as interface modules, adapters, etc.].
What are the maintenance requirements for IEG6-1REG4-52-1.00-01-V?
- Maintenance requirements for IEG6-1REG4-52-1.00-01-V may include [list maintenance tasks such as periodic inspections, testing, cleaning, etc.].
Is IEG6-1REG4-52-1.00-01-V compliant with industry standards and regulations?
- Yes, IEG6-1REG4-52-1.00-01-V is designed to comply with relevant industry standards and regulations to ensure safety and performance.
Can IEG6-1REG4-52-1.00-01-V be customized for specific technical solutions?
- Depending on the manufacturer, customization options for IEG6-1REG4-52-1.00-01-V may be available to meet specific technical requirements.
What are the typical installation considerations for IEG6-1REG4-52-1.00-01-V?
- Installation considerations for IEG6-1REG4-52-1.00-01-V may include [describe factors such as mounting, wiring, grounding, etc.].
Are there any known performance limitations or constraints associated with IEG6-1REG4-52-1.00-01-V?
- It's important to consider factors such as temperature range, voltage fluctuations, and other environmental conditions that may impact the performance of IEG6-1REG4-52-1.00-01-V.
Where can I find technical documentation and support for IEG6-1REG4-52-1.00-01-V?
- Technical documentation and support for IEG6-1REG4-52-1.00-01-V can typically be obtained from the manufacturer or supplier, including datasheets, application notes, and customer support channels.