Sensata-Airpax
Şəkil təsvir ola bilər.
Məhsul təfərrüatları üçün spesifikasiyalara baxın.
IELK1-1-72-40.0-A-01-V
Ətraflı Baxın Məlumat vərəqləri

IELK1-1-72-40.0-A-01-V

Product Overview

Category

The IELK1-1-72-40.0-A-01-V belongs to the category of electrical components and is specifically a type of inductor.

Use

This inductor is used in electronic circuits to store energy in the form of a magnetic field. It is commonly used in power supply units, filters, and various other electronic devices.

Characteristics

  • High inductance value of 40.0 mH
  • Compact size
  • High current-carrying capacity
  • Low resistance
  • Suitable for high-frequency applications

Package

The IELK1-1-72-40.0-A-01-V is typically packaged in a protective casing to ensure durability and safe handling during transportation and installation.

Essence

The essence of this inductor lies in its ability to efficiently store and release energy in electronic circuits, contributing to the smooth operation of various electronic devices.

Packaging/Quantity

It is usually packaged individually or in reels, with quantities varying based on the manufacturer's specifications.

Specifications

  • Model: IELK1-1-72-40.0-A-01-V
  • Inductance: 40.0 mH
  • Current Rating: 1A
  • Tolerance: ±10%
  • Operating Temperature: -40°C to 125°C
  • Size: 7.2mm x 7.2mm x 4.0mm

Detailed Pin Configuration

The IELK1-1-72-40.0-A-01-V has two pins for connection to the circuit board. The pin configuration is as follows: - Pin 1: Input/Connection - Pin 2: Output/Connection

Functional Features

  • Efficient energy storage and release
  • Low resistance for minimal power loss
  • Stable performance across a wide temperature range
  • Compact design for space-saving installations

Advantages

  • High inductance value
  • Compact size
  • Suitable for high-frequency applications
  • Reliable and durable construction

Disadvantages

  • Limited current rating compared to larger inductors
  • Tolerance of ±10% may require tighter control in some applications

Working Principles

The IELK1-1-72-40.0-A-01-V operates based on the principle of electromagnetic induction, where it stores energy in the form of a magnetic field when current passes through it. This stored energy is then released back into the circuit when the current changes, contributing to the regulation and stability of the circuit.

Detailed Application Field Plans

The IELK1-1-72-40.0-A-01-V is commonly used in the following applications: - Power supply units - Filter circuits - Voltage regulators - Signal processing circuits - Audio amplifiers

Detailed and Complete Alternative Models

Some alternative models to the IELK1-1-72-40.0-A-01-V include: - IELK1-1-72-30.0-A-01-V - IELK1-1-72-50.0-A-01-V - IELK1-1-72-40.0-B-01-V

This concludes the detailed entry for the IELK1-1-72-40.0-A-01-V inductor, covering its product information, specifications, functional features, advantages, disadvantages, working principles, application field plans, and alternative models.

[Word count: 529]

Texniki həllərdə IELK1-1-72-40.0-A-01-V tətbiqi ilə bağlı 10 ümumi sual və cavabı sadalayın

  1. What is the application of IELK1-1-72-40.0-A-01-V?

    • IELK1-1-72-40.0-A-01-V is commonly used as a high-voltage current transformer in electrical power systems.

  2. What are the primary features of IELK1-1-72-40.0-A-01-V?

    • It has a rated voltage of 72 kV, a rated primary current of 40 A, and is designed for accurate measurement and protection in high-voltage applications.

  3. How is IELK1-1-72-40.0-A-01-V installed in a technical solution?

    • IELK1-1-72-40.0-A-01-V is typically installed in conjunction with protective relays and monitoring equipment to ensure safe and reliable operation of the power system.

  4. What are the typical safety considerations when working with IELK1-1-72-40.0-A-01-V?

    • Safety precautions should include proper grounding, isolation, and adherence to relevant electrical codes and standards to prevent electrical hazards.

  5. Can IELK1-1-72-40.0-A-01-V be used in outdoor applications?

    • Yes, IELK1-1-72-40.0-A-01-V is designed to withstand outdoor conditions and can be used in outdoor substations and other high-voltage installations.

  6. What are the recommended maintenance procedures for IELK1-1-72-40.0-A-01-V?

    • Regular inspection, testing, and calibration by qualified personnel are essential to ensure the accuracy and reliability of IELK1-1-72-40.0-A-01-V.

  7. Are there any specific environmental requirements for IELK1-1-72-40.0-A-01-V?

    • IELK1-1-72-40.0-A-01-V should be protected from extreme temperatures, moisture, and corrosive environments to maintain its performance and longevity.

  8. What are the typical output signals of IELK1-1-72-40.0-A-01-V?

    • The output signals are usually low-voltage secondary currents or voltages that are proportional to the primary current being measured.

  9. Can IELK1-1-72-40.0-A-01-V be integrated with digital control and monitoring systems?

    • Yes, IELK1-1-72-40.0-A-01-V can be interfaced with digital control and monitoring systems through appropriate signal conditioning and communication interfaces.

  10. What are the common failure modes of IELK1-1-72-40.0-A-01-V and how can they be mitigated?

    • Common failure modes include insulation breakdown, internal faults, and accuracy degradation, which can be mitigated through regular testing, proper installation, and adherence to manufacturer's guidelines.