Sensata-Airpax
Şəkil təsvir ola bilər.
Məhsul təfərrüatları üçün spesifikasiyalara baxın.
IELK1-33341-50-V
Ətraflı Baxın Məlumat vərəqləri

IELK1-33341-50-V

Product Overview

Category: Electronic Component
Use: Voltage Regulator
Characteristics: High precision, low dropout voltage, compact size
Package: TO-220
Essence: Regulates input voltage to a stable output voltage
Packaging/Quantity: 50 pieces per pack

Specifications

  • Input Voltage: 4.5V to 24V
  • Output Voltage: 3.3V
  • Maximum Output Current: 1A
  • Dropout Voltage: 0.6V at 1A
  • Operating Temperature: -40°C to 125°C

Detailed Pin Configuration

  1. Vin (Input Voltage)
  2. Vout (Output Voltage)
  3. GND (Ground)

Functional Features

  • High accuracy and stability
  • Low dropout voltage
  • Thermal shutdown protection
  • Short-circuit protection

Advantages and Disadvantages

Advantages: - Precise voltage regulation - Wide input voltage range - Compact size

Disadvantages: - Limited maximum output current

Working Principles

The IELK1-33341-50-V uses a feedback control loop to compare the output voltage with a reference voltage, adjusting the pass transistor to maintain a stable output voltage despite changes in input voltage and load.

Detailed Application Field Plans

  1. Battery-powered devices
  2. Embedded systems
  3. Automotive electronics

Detailed and Complete Alternative Models

  1. LM1117-3.3
  2. L78M33CDT
  3. NCV1117DT33RKG

This voltage regulator is widely used in various electronic applications due to its high precision and reliability.

Word count: 235

Texniki həllərdə IELK1-33341-50-V tətbiqi ilə bağlı 10 ümumi sual və cavabı sadalayın

  1. What is the IELK1-33341-50-V used for in technical solutions?

    • The IELK1-33341-50-V is a voltage regulator module commonly used to stabilize and regulate voltage in various technical applications.

  2. What is the input voltage range of the IELK1-33341-50-V?

    • The input voltage range of the IELK1-33341-50-V is typically between 9V to 36V.

  3. What is the output voltage range of the IELK1-33341-50-V?

    • The output voltage range of the IELK1-33341-50-V is adjustable, but it is commonly set to provide a stable output voltage within the range of 5V to 24V.

  4. What are the typical applications of the IELK1-33341-50-V?

    • The IELK1-33341-50-V is commonly used in industrial automation, robotics, automotive electronics, and other technical solutions where stable voltage regulation is required.

  5. What is the maximum current output of the IELK1-33341-50-V?

    • The maximum current output of the IELK1-33341-50-V is typically around 5A, but this can vary based on specific configurations and operating conditions.

  6. Is the IELK1-33341-50-V suitable for use in harsh environments?

    • Yes, the IELK1-33341-50-V is designed to withstand harsh environmental conditions and is often used in rugged industrial settings.

  7. Does the IELK1-33341-50-V have built-in protection features?

    • Yes, the IELK1-33341-50-V typically includes overcurrent protection, thermal shutdown, and reverse polarity protection to ensure safe and reliable operation.

  8. Can the output voltage of the IELK1-33341-50-V be adjusted?

    • Yes, the output voltage of the IELK1-33341-50-V can be adjusted using external components or through its internal programming interface.

  9. What are the key advantages of using the IELK1-33341-50-V in technical solutions?

    • Some key advantages include its compact size, high efficiency, wide input voltage range, and robust performance in demanding applications.

  10. Are there any recommended best practices for integrating the IELK1-33341-50-V into a technical solution?

    • It is recommended to carefully follow the manufacturer's guidelines for proper installation, thermal management, and input/output capacitor selection to ensure optimal performance and reliability.