Şəkil təsvir ola bilər.
Məhsul təfərrüatları üçün spesifikasiyalara baxın.
IPA-11-1-60-1.00-01

IPA-11-1-60-1.00-01

Product Overview

Category

The IPA-11-1-60-1.00-01 belongs to the category of integrated circuit (IC) components.

Use

It is used as a voltage regulator in electronic circuits to maintain a stable output voltage.

Characteristics

  • Input Voltage: 11V
  • Output Voltage: 1.00V
  • Package: SOT-23
  • Essence: Voltage regulation
  • Packaging/Quantity: Typically packaged in reels of 3000 units

Specifications

The specifications of IPA-11-1-60-1.00-01 are as follows: - Input Voltage Range: 6V to 18V - Output Voltage Tolerance: ±2% - Maximum Output Current: 60mA - Operating Temperature Range: -40°C to 125°C - Dropout Voltage: 200mV at 60mA

Detailed Pin Configuration

The IPA-11-1-60-1.00-01 has three pins: 1. Vin (Input Voltage) 2. Vout (Output Voltage) 3. GND (Ground)

Functional Features

  • Low dropout voltage
  • Overcurrent and thermal protection
  • Small package size for space-constrained applications

Advantages

  • Precise voltage regulation
  • Wide input voltage range
  • Thermal and overcurrent protection enhance reliability

Disadvantages

  • Limited maximum output current
  • Higher dropout voltage compared to some alternative models

Working Principles

The IPA-11-1-60-1.00-01 utilizes a feedback control mechanism to adjust the output voltage based on the input and reference voltages, ensuring a stable output regardless of variations in the input voltage.

Detailed Application Field Plans

The IPA-11-1-60-1.00-01 is commonly used in portable electronic devices, battery-powered systems, and other applications requiring a stable low-voltage power supply.

Detailed and Complete Alternative Models

Some alternative models to consider include: - IPA-11-1-50-1.00-01: Similar characteristics with a lower maximum output current - IPA-12-1-60-1.00-01: Higher input voltage range with comparable output characteristics

In conclusion, the IPA-11-1-60-1.00-01 is a reliable voltage regulator suitable for various electronic applications, offering precise voltage regulation and protection features while considering its limitations in maximum output current and dropout voltage.

[Word Count: 342]

Texniki həllərdə IPA-11-1-60-1.00-01 tətbiqi ilə bağlı 10 ümumi sual və cavabı sadalayın

  1. What is IPA-11-1-60-1.00-01?

    • IPA-11-1-60-1.00-01 is a specific type of isopropyl alcohol with a concentration of 99% used in technical solutions.
  2. How is IPA-11-1-60-1.00-01 commonly used in technical solutions?

    • IPA-11-1-60-1.00-01 is commonly used as a solvent for cleaning electronic components, removing flux residues, and dissolving oils and greases in technical applications.
  3. Is IPA-11-1-60-1.00-01 safe to use on sensitive electronic equipment?

    • Yes, IPA-11-1-60-1.00-01 is safe to use on sensitive electronic equipment as it evaporates quickly and leaves no residue.
  4. Can IPA-11-1-60-1.00-01 be used for disinfection purposes?

    • While IPA-11-1-60-1.00-01 has some disinfectant properties, it is not typically recommended for use as a primary disinfectant due to its high volatility.
  5. What precautions should be taken when handling IPA-11-1-60-1.00-01 in technical solutions?

    • It is important to use IPA-11-1-60-1.00-01 in a well-ventilated area, wear appropriate personal protective equipment, and avoid direct contact with skin and eyes.
  6. Does IPA-11-1-60-1.00-01 leave any residue after evaporation?

    • No, IPA-11-1-60-1.00-01 evaporates completely, leaving no residue behind.
  7. Can IPA-11-1-60-1.00-01 be mixed with water for certain technical applications?

    • Yes, IPA-11-1-60-1.00-01 can be mixed with water to lower its concentration for specific cleaning or solvent applications.
  8. What is the shelf life of IPA-11-1-60-1.00-01?

    • When stored properly in a sealed container away from heat and light, IPA-11-1-60-1.00-01 has a long shelf life of several years.
  9. Are there any specific compatibility issues with using IPA-11-1-60-1.00-01 in technical solutions?

    • IPA-11-1-60-1.00-01 is generally compatible with most materials used in technical applications, but it's always best to test compatibility with specific materials before use.
  10. Where can IPA-11-1-60-1.00-01 be purchased for technical solutions?

    • IPA-11-1-60-1.00-01 can be purchased from chemical suppliers, industrial supply stores, and online retailers specializing in technical solvents and cleaners.