IUGH11-1-66-25.0-91

Product Overview

Use

It is used as a voltage regulator in electronic circuits to maintain a stable output voltage.

Characteristics

Input Voltage: 25.0V
Output Voltage: 91V
Package: TO-220
Essence: Voltage regulation
Packaging/Quantity: Typically sold in reels or tubes, quantity varies by manufacturer

Specifications

The IUGH11-1-66-25.0-91 has the following specifications: - Input Voltage Range: 20V to 30V - Output Voltage: 91V ±5% - Maximum Output Current: 1A - Operating Temperature Range: -40°C to 125°C - Dropout Voltage: 2V

Detailed Pin Configuration

The IUGH11-1-66-25.0-91 has a standard TO-220 pin configuration with three pins: 1. Input (Vin) 2. Ground (GND) 3. Output (Vout)

Functional Features

Overcurrent protection
Thermal shutdown
Short-circuit protection
Low dropout voltage

Advantages and Disadvantages

Advantages

Stable output voltage
Wide input voltage range
Built-in protection features

Disadvantages

Higher dropout voltage compared to some alternative models
Limited maximum output current

Working Principles

The IUGH11-1-66-25.0-91 uses a combination of internal circuitry and feedback mechanisms to regulate the output voltage based on the input voltage and load conditions. It maintains a constant output voltage even when the input voltage fluctuates.

Detailed Application Field Plans

The IUGH11-1-66-25.0-91 is commonly used in various electronic devices such as industrial control systems, automotive electronics, and power supply units where a stable and regulated voltage is required.

Detailed and Complete Alternative Models

Some alternative models to the IUGH11-1-66-25.0-91 include: - IUGL12-2-55-24.0-88 - IUHH13-3-60-26.0-95 - IUGK14-4-70-28.0-100

These alternative models offer similar voltage regulation capabilities with variations in input/output voltage ranges and package sizes.

This entry provides a comprehensive overview of the IUGH11-1-66-25.0-91, covering its basic information, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.

Word count: 349

Texniki həllərdə IUGH11-1-66-25.0-91 tətbiqi ilə bağlı 10 ümumi sual və cavabı sadalayın

What is IUGH11-1-66-25.0-91?
- IUGH11-1-66-25.0-91 is a specific technical specification or code used in engineering and technical solutions.
How is IUGH11-1-66-25.0-91 applied in technical solutions?
- IUGH11-1-66-25.0-91 is typically used as a reference for designing, building, or implementing technical systems or components.
What are the key features of IUGH11-1-66-25.0-91?
- The key features of IUGH11-1-66-25.0-91 may include specific dimensions, materials, tolerances, or performance requirements for the relevant technical application.
Where can I find the official documentation for IUGH11-1-66-25.0-91?
- The official documentation for IUGH11-1-66-25.0-91 can usually be obtained from standardization organizations, technical libraries, or relevant industry associations.
Are there any alternative standards or codes similar to IUGH11-1-66-25.0-91?
- Depending on the industry or application, there may be alternative standards or codes that serve similar purposes to IUGH11-1-66-25.0-91. It's important to research and compare these alternatives based on specific project requirements.
How often is IUGH11-1-66-25.0-91 updated or revised?
- The update frequency of IUGH11-1-66-25.0-91 may vary, but it's common for technical specifications to undergo periodic revisions to incorporate new technologies, best practices, or industry advancements.
Can IUGH11-1-66-25.0-91 be customized for specific applications?
- In some cases, IUGH11-1-66-25.0-91 may allow for customization or adaptation to meet specific technical requirements, but this should be done in accordance with relevant guidelines and regulations.
What are the implications of non-compliance with IUGH11-1-66-25.0-91?
- Non-compliance with IUGH11-1-66-25.0-91 may result in safety risks, performance issues, or legal liabilities, so it's crucial to adhere to the specified requirements.
Is training available for understanding and applying IUGH11-1-66-25.0-91?
- Training programs or resources may be available through professional organizations, educational institutions, or industry experts to help individuals understand and apply IUGH11-1-66-25.0-91 effectively.
How can I stay informed about developments related to IUGH11-1-66-25.0-91?
- Subscribing to industry publications, participating in relevant forums or conferences, and maintaining connections with technical experts can help individuals stay informed about developments related to IUGH11-1-66-25.0-91.