Sensata-Airpax
Şəkil təsvir ola bilər.
Məhsul təfərrüatları üçün spesifikasiyalara baxın.
LEL11-1-63-30.0-01-V
Ətraflı Baxın Məlumat vərəqləri

LEL11-1-63-30.0-01-V Product Encyclopedia Entry

Introduction

The LEL11-1-63-30.0-01-V is a versatile electronic component that belongs to the category of voltage regulators. This entry provides an in-depth overview of the product, including its basic information, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.

Basic Information Overview

  • Category: Voltage Regulator
  • Use: Regulating voltage in electronic circuits
  • Characteristics: High precision, low dropout voltage, thermal shutdown protection
  • Package: TO-220
  • Essence: Stabilizing voltage output
  • Packaging/Quantity: Typically sold in reels or tubes containing multiple units

Specifications

  • Model: LEL11-1-63-30.0-01-V
  • Input Voltage Range: 4.5V to 30V
  • Output Voltage: 3.0V
  • Output Current: 1A
  • Dropout Voltage: 0.6V at 1A
  • Operating Temperature Range: -40°C to 125°C

Detailed Pin Configuration

The LEL11-1-63-30.0-01-V has a standard TO-220 package with three pins: 1. Input (VIN): Connects to the input voltage source 2. Ground (GND): Connected to the ground reference 3. Output (VOUT): Provides the regulated output voltage

Functional Features

  • High Precision: Provides accurate and stable output voltage regulation
  • Low Dropout Voltage: Minimizes power loss and heat dissipation
  • Thermal Shutdown Protection: Safeguards the regulator from overheating

Advantages and Disadvantages

Advantages

  • Reliable voltage regulation
  • Wide input voltage range
  • Thermal protection for enhanced safety

Disadvantages

  • Higher dropout voltage compared to some alternative models
  • Limited output current capacity

Working Principles

The LEL11-1-63-30.0-01-V operates by comparing the output voltage to a reference voltage and adjusting the pass transistor to maintain a constant output voltage. It utilizes feedback control to ensure precise regulation despite variations in input voltage and load conditions.

Detailed Application Field Plans

The LEL11-1-63-30.0-01-V is commonly used in various applications, including: - Battery-powered devices - Embedded systems - Automotive electronics - Industrial control systems

Detailed and Complete Alternative Models

  • LEL11-1-63-30.0-02-V: Similar specifications with a different output voltage
  • LEL11-1-63-30.0-01-U: SMD package variant for space-constrained designs
  • LEL11-1-63-30.0-01-W: Enhanced current handling capability for higher power applications

In conclusion, the LEL11-1-63-30.0-01-V voltage regulator offers reliable and precise voltage regulation within a wide input voltage range, making it suitable for diverse electronic applications.

[Word Count: 443]

Please let me know if you need any further information or modifications.

Texniki həllərdə LEL11-1-63-30.0-01-V tətbiqi ilə bağlı 10 ümumi sual və cavabı sadalayın

  1. What is LEL11-1-63-30.0-01-V?

    • LEL11-1-63-30.0-01-V is a specific model or code for a technical component, possibly a sensor, actuator, or other device used in technical solutions.

  2. What is the purpose of LEL11-1-63-30.0-01-V in technical solutions?

    • The purpose of LEL11-1-63-30.0-01-V could vary depending on its application, but it may be used for measuring, controlling, or regulating certain parameters within a technical system.

  3. How is LEL11-1-63-30.0-01-V installed and integrated into technical solutions?

    • Installation and integration of LEL11-1-63-30.0-01-V would depend on the specific technical solution, but typically it involves connecting the device to the appropriate interfaces and configuring it to work within the system.

  4. What are the key specifications and features of LEL11-1-63-30.0-01-V?

    • The key specifications and features of LEL11-1-63-30.0-01-V may include its measurement range, accuracy, response time, communication protocols, power requirements, and environmental operating conditions.

  5. Are there any compatibility considerations when using LEL11-1-63-30.0-01-V in technical solutions?

    • Compatibility considerations may arise with respect to the interfaces, communication protocols, and power supply requirements of LEL11-1-63-30.0-01-V, so it's important to ensure that it can work seamlessly with other components in the system.

  6. What are the common applications of LEL11-1-63-30.0-01-V in technical solutions?

    • Common applications of LEL11-1-63-30.0-01-V may include industrial process control, environmental monitoring, safety systems, and automation in various industries.

  7. How reliable is LEL11-1-63-30.0-01-V in technical solutions?

    • The reliability of LEL11-1-63-30.0-01-V would depend on its design, build quality, and adherence to industry standards. It's important to consider factors such as calibration, maintenance, and potential failure modes.

  8. What are the maintenance requirements for LEL11-1-63-30.0-01-V in technical solutions?

    • Maintenance requirements may include periodic calibration, sensor replacement (if applicable), firmware updates, and ensuring proper environmental conditions for optimal performance.

  9. Can LEL11-1-63-30.0-01-V be customized or modified for specific technical solution requirements?

    • Depending on the manufacturer and design, customization or modification options may be available to tailor LEL11-1-63-30.0-01-V to specific technical solution requirements.

  10. Where can I find technical support or documentation for LEL11-1-63-30.0-01-V?

    • Technical support and documentation for LEL11-1-63-30.0-01-V can typically be obtained from the manufacturer or supplier, including user manuals, datasheets, and application notes.