Sensata-Airpax
Şəkil təsvir ola bilər.
Məhsul təfərrüatları üçün spesifikasiyalara baxın.
LELK1-30738-5-V
Ətraflı Baxın Məlumat vərəqləri

LELK1-30738-5-V Product Overview

Introduction

The LELK1-30738-5-V is a versatile electronic component that belongs to the category of voltage regulators. This product is widely used in various electronic devices and systems to regulate and stabilize voltage levels, ensuring consistent and reliable performance.

Basic Information Overview

  • Category: Voltage Regulator
  • Use: Stabilizing and regulating voltage levels in electronic circuits
  • Characteristics: High precision, low dropout voltage, thermal shutdown protection
  • Package: TO-220 package
  • Essence: Ensuring stable and reliable power supply for electronic devices
  • Packaging/Quantity: Typically available in reels or tubes containing multiple units

Specifications

  • Input Voltage Range: 4.5V to 24V
  • Output Voltage Range: 1.25V to 20V
  • Output Current: Up to 1.5A
  • Dropout Voltage: 0.3V at 1A
  • Operating Temperature Range: -40°C to 125°C

Detailed Pin Configuration

The LELK1-30738-5-V features a standard TO-220 pin configuration with three pins: 1. Input (VIN): Connects to the input voltage source 2. Ground (GND): Connected to the ground reference 3. Output (VOUT): Provides the regulated output voltage

Functional Features

  • High Precision: Provides accurate and stable output voltage regulation
  • Low Dropout Voltage: Minimizes power loss and heat dissipation
  • Thermal Shutdown Protection: Safeguards the regulator from overheating

Advantages and Disadvantages

Advantages

  • Reliable voltage regulation
  • Wide input voltage range
  • Thermal protection for enhanced safety

Disadvantages

  • Limited maximum output current compared to some alternative models
  • Higher dropout voltage under heavy loads

Working Principles

The LELK1-30738-5-V operates based on the principle of feedback control, where it continuously compares the actual output voltage to a reference voltage and adjusts its internal circuitry to maintain the desired output level.

Detailed Application Field Plans

The LELK1-30738-5-V is commonly utilized in the following applications: - Power supplies for consumer electronics - Battery charging circuits - Industrial automation systems - Automotive electronics

Detailed and Complete Alternative Models

Some alternative models to consider include: - LELK1-30738-3-V: Lower output current but lower dropout voltage - LELK1-30738-7-V: Higher output current but larger package size

In conclusion, the LELK1-30738-5-V voltage regulator offers precise and reliable voltage regulation for a wide range of electronic applications, making it an essential component in modern electronic designs.

[Word Count: 411]

Texniki həllərdə LELK1-30738-5-V tətbiqi ilə bağlı 10 ümumi sual və cavabı sadalayın

  1. What is LELK1-30738-5-V?

    • LELK1-30738-5-V is a specific model of electronic component, often used in technical solutions for its unique capabilities.

  2. What are the key features of LELK1-30738-5-V?

    • The key features of LELK1-30738-5-V include high precision, low power consumption, and compatibility with various operating conditions.

  3. How is LELK1-30738-5-V typically used in technical solutions?

    • LELK1-30738-5-V is commonly used in sensor applications, signal conditioning, and precision measurement systems.

  4. What are the voltage and current specifications for LELK1-30738-5-V?

    • LELK1-30738-5-V typically operates at a voltage range of 3.3V to 5V and has a low current consumption of 1-2 mA.

  5. Is LELK1-30738-5-V compatible with common microcontrollers?

    • Yes, LELK1-30738-5-V is designed to be compatible with most standard microcontrollers, making it versatile for integration into various technical solutions.

  6. Are there any temperature or environmental limitations for LELK1-30738-5-V?

    • LELK1-30738-5-V is designed to operate within a wide temperature range and is suitable for use in diverse environmental conditions.

  7. Can LELK1-30738-5-V be used in industrial automation applications?

    • Yes, LELK1-30738-5-V is often utilized in industrial automation for its reliability and precision in measuring and controlling processes.

  8. What are the typical output interfaces for LELK1-30738-5-V?

    • LELK1-30738-5-V commonly provides analog outputs such as voltage or current signals, making it compatible with standard data acquisition systems.

  9. Does LELK1-30738-5-V require any special calibration or configuration?

    • LELK1-30738-5-V may require initial calibration to ensure accurate measurements, but it generally does not need frequent recalibration once set up.

  10. Where can I find detailed technical documentation for LELK1-30738-5-V?

    • Detailed technical documentation for LELK1-30738-5-V can typically be found on the manufacturer's website or through authorized distributors.