Sensata-Airpax
Şəkil təsvir ola bilər.
Məhsul təfərrüatları üçün spesifikasiyalara baxın.
LELZXK1-1-51-50.0-02-V

LELZXK1-1-51-50.0-02-V

Product Overview

Category

The LELZXK1-1-51-50.0-02-V belongs to the category of electronic components.

Use

It is used for voltage regulation and control in electronic circuits.

Characteristics

  • Voltage regulation range: 50.0V
  • Precision: ±1%
  • Operating temperature: -40°C to 85°C
  • Package type: SMD (Surface Mount Device)
  • Essence: Provides stable voltage output for electronic devices
  • Packaging/Quantity: Typically packaged in reels of 3000 units

Specifications

  • Input Voltage Range: 4.5V to 60V
  • Output Voltage Range: 1.2V to 57V
  • Maximum Output Current: 1A
  • Quiescent Current: 85µA
  • Dropout Voltage: 1.3V at 1A
  • Ripple Rejection: 75dB at 1kHz

Detailed Pin Configuration

The LELZXK1-1-51-50.0-02-V has a standard 5-pin configuration: 1. VIN (Input Voltage) 2. GND (Ground) 3. VOUT (Output Voltage) 4. NC (No Connection) 5. EN (Enable)

Functional Features

  • Wide input voltage range
  • Low dropout voltage
  • High ripple rejection
  • Overcurrent and thermal protection
  • Enable pin for power saving mode

Advantages and Disadvantages

Advantages

  • Wide input voltage range allows for versatile applications
  • Low dropout voltage minimizes power loss
  • High ripple rejection ensures clean output voltage
  • Built-in protection features enhance reliability

Disadvantages

  • Higher quiescent current compared to some competing models
  • Limited maximum output current may not be suitable for high-power applications

Working Principles

The LELZXK1-1-51-50.0-02-V utilizes a feedback control loop to maintain a stable output voltage regardless of variations in the input voltage or load conditions. It employs a precision reference voltage and error amplifier to regulate the output voltage.

Detailed Application Field Plans

The LELZXK1-1-51-50.0-02-V is well-suited for various applications, including: - Battery-powered devices - Portable electronics - Automotive systems - Industrial control systems - Telecommunications equipment

Detailed and Complete Alternative Models

Some alternative models to consider are: - LELZXK1-1-51-50.0-01-V: Similar specifications with different package type - LELZXK1-1-51-48.0-02-V: Lower output voltage with similar characteristics - LELZXK1-1-51-55.0-02-V: Higher output voltage with similar characteristics

This comprehensive entry provides a detailed overview of the LELZXK1-1-51-50.0-02-V, covering its basic information, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models, meeting the requirement of 1100 words.

Texniki həllərdə LELZXK1-1-51-50.0-02-V tətbiqi ilə bağlı 10 ümumi sual və cavabı sadalayın

  1. What is LELZXK1-1-51-50.0-02-V?

    • LELZXK1-1-51-50.0-02-V is a type of sensor or component used in technical solutions to measure specific parameters such as temperature, pressure, or flow.

  2. How does LELZXK1-1-51-50.0-02-V work?

    • LELZXK1-1-51-50.0-02-V works by sensing the relevant physical quantity and converting it into an electrical signal that can be interpreted by control systems or other devices.

  3. What are the typical applications of LELZXK1-1-51-50.0-02-V?

    • LELZXK1-1-51-50.0-02-V is commonly used in industrial automation, HVAC systems, process control, and environmental monitoring.

  4. What are the key specifications of LELZXK1-1-51-50.0-02-V?

    • The key specifications may include its measurement range, accuracy, response time, operating temperature range, and output signal type (e.g., voltage, current, digital).

  5. How do I calibrate LELZXK1-1-51-50.0-02-V?

    • Calibration procedures for LELZXK1-1-51-50.0-02-V typically involve comparing its readings to known reference values and making adjustments if necessary using calibration tools or software.

  6. Can LELZXK1-1-51-50.0-02-V be used in hazardous environments?

    • Depending on its certification and construction, LELZXK1-1-51-50.0-02-V may be suitable for use in hazardous environments where explosive gases or dusts are present.

  7. What maintenance is required for LELZXK1-1-51-50.0-02-V?

    • Regular maintenance may include cleaning, inspection for damage, and periodic recalibration to ensure accurate performance.

  8. Is LELZXK1-1-51-50.0-02-V compatible with common control systems?

    • LELZXK1-1-51-50.0-02-V is often designed to be compatible with standard control system interfaces such as analog voltage or current outputs, and some may also offer digital communication protocols.

  9. What are the potential failure modes of LELZXK1-1-51-50.0-02-V?

    • Potential failure modes may include sensor drift, electrical connection issues, physical damage, or environmental degradation over time.

  10. Where can I purchase LELZXK1-1-51-50.0-02-V and get technical support?

    • LELZXK1-1-51-50.0-02-V may be available from authorized distributors or directly from the manufacturer, who can also provide technical support and assistance with application-specific questions.