Məhsul təfərrüatları üçün spesifikasiyalara baxın.
EFM32WG280F256-QFP100
Product Overview
Category
The EFM32WG280F256-QFP100 belongs to the category of microcontrollers.
Use
This microcontroller is commonly used in various electronic devices and systems for embedded applications.
Characteristics
- High-performance 32-bit ARM Cortex-M4 core
- Low power consumption
- Wide operating voltage range
- Rich peripheral set for versatile applications
- Extensive connectivity options
- Advanced security features
Package
The EFM32WG280F256-QFP100 comes in a Quad Flat Package (QFP) with 100 pins.
Essence
The essence of this microcontroller lies in its ability to provide high performance, low power consumption, and a wide range of features for embedded applications.
Packaging/Quantity
The EFM32WG280F256-QFP100 is typically packaged individually and is available in various quantities depending on the manufacturer's specifications.
Specifications
- Microcontroller Core: ARM Cortex-M4
- Clock Speed: Up to 48 MHz
- Flash Memory: 256 KB
- RAM: 32 KB
- Operating Voltage Range: 1.8V - 3.8V
- Digital I/O Pins: 80
- Analog Input Channels: 16
- Communication Interfaces: UART, SPI, I2C, USB, CAN
- Timers/Counters: 6
- ADC Resolution: 12-bit
- PWM Outputs: 6
- Operating Temperature Range: -40°C to +85°C
Detailed Pin Configuration
The EFM32WG280F256-QFP100 has a total of 100 pins. The pin configuration is as follows:
- Pin 1: VDD
- Pin 2: PA0
- Pin 3: PA1
- ...
- Pin 99: PC14
- Pin 100: PC15
For a complete pin configuration diagram, please refer to the datasheet provided by the manufacturer.
Functional Features
- High-performance ARM Cortex-M4 core for efficient processing
- Low power consumption for extended battery life
- Rich peripheral set including UART, SPI, I2C, USB, and CAN interfaces for versatile connectivity options
- Advanced security features to protect sensitive data
- Extensive timer/counters and PWM outputs for precise timing and control
- Analog input channels for sensor interfacing
- Flash memory for program storage
- RAM for data storage
Advantages and Disadvantages
Advantages
- High-performance processing capabilities
- Low power consumption for energy-efficient designs
- Versatile connectivity options for various applications
- Advanced security features for data protection
- Precise timing and control with timer/counters and PWM outputs
Disadvantages
- Limited flash memory and RAM capacity compared to some other microcontrollers in the market
- Higher cost compared to lower-end microcontrollers
Working Principles
The EFM32WG280F256-QFP100 operates based on the principles of the ARM Cortex-M4 architecture. It executes instructions stored in its flash memory and processes data using its internal registers and peripherals. The microcontroller interacts with external devices through its various communication interfaces and GPIO pins. It can be programmed using software development tools and programming languages compatible with the ARM Cortex-M4 architecture.
Detailed Application Field Plans
The EFM32WG280F256-QFP100 is suitable for a wide range of applications, including but not limited to: - Industrial automation systems - Internet of Things (IoT) devices - Home automation systems - Medical devices - Consumer electronics - Automotive electronics
Detailed and Complete Alternative Models
- EFM32WG230F256-QFP100
- EFM32WG380F256-QFP100
- EFM32WG280F128-QFP100
- EFM32WG280F512-QFP100
These alternative models offer similar features and capabilities, but may vary in terms of memory capacity, pin count, or other specifications. It is recommended to refer to the datasheets of these alternative models for detailed information.
Note: The content provided above is a general overview and should be verified with the manufacturer's datasheet for accurate and up-to-date information.
Texniki həllərdə EFM32WG280F256-QFP100 tətbiqi ilə bağlı 10 ümumi sual və cavabı sadalayın
Sure! Here are 10 common questions and answers related to the application of EFM32WG280F256-QFP100 in technical solutions:
Q: What is EFM32WG280F256-QFP100? A: EFM32WG280F256-QFP100 is a microcontroller from Silicon Labs' EFM32 Wonder Gecko series, featuring an ARM Cortex-M4 core.
Q: What are the key features of EFM32WG280F256-QFP100? A: Some key features include 256KB Flash memory, 32KB RAM, QFP100 package, low power consumption, and a wide range of peripherals.
Q: What applications can EFM32WG280F256-QFP100 be used for? A: EFM32WG280F256-QFP100 is suitable for various applications such as IoT devices, industrial automation, smart energy, and consumer electronics.
Q: How can I program EFM32WG280F256-QFP100? A: You can program EFM32WG280F256-QFP100 using the Silicon Labs' Simplicity Studio IDE, which supports C programming language.
Q: What communication interfaces are available on EFM32WG280F256-QFP100? A: EFM32WG280F256-QFP100 offers several communication interfaces, including UART, SPI, I2C, USB, and Ethernet.
Q: Can EFM32WG280F256-QFP100 operate on low power? A: Yes, EFM32WG280F256-QFP100 is designed for low power operation, with multiple energy modes and sleep modes to conserve power.
Q: Does EFM32WG280F256-QFP100 support real-time operating systems (RTOS)? A: Yes, EFM32WG280F256-QFP100 is compatible with various RTOS options like FreeRTOS and Micrium OS.
Q: Are there any development boards available for EFM32WG280F256-QFP100? A: Yes, Silicon Labs offers development boards like the EFM32WG-STK3800, which can be used for prototyping and evaluation.
Q: Can I use EFM32WG280F256-QFP100 for battery-powered applications? A: Absolutely! EFM32WG280F256-QFP100's low power features make it suitable for battery-powered applications, extending battery life.
Q: Where can I find more technical documentation and resources for EFM32WG280F256-QFP100? A: You can find detailed technical documentation, datasheets, application notes, and software examples on Silicon Labs' website or Simplicity Studio.