STMicroelectronics
Şəkil təsvir ola bilər.
Məhsul təfərrüatları üçün spesifikasiyalara baxın.
STM8S207C6T6TR
Ətraflı Baxın Məlumat vərəqləri

STM8S207C6T6TR

Product Overview

  • Category: Microcontroller
  • Use: Embedded systems, IoT devices, consumer electronics
  • Characteristics:
    • High-performance 8-bit microcontroller
    • Low power consumption
    • Wide operating voltage range
    • Rich peripheral set
  • Package: TQFP-48
  • Essence: Advanced microcontroller for various applications
  • Packaging/Quantity: Tape and reel, 2500 units per reel

Specifications

  • Architecture: 8-bit
  • CPU Frequency: Up to 16 MHz
  • Flash Memory: 32 KB
  • RAM: 2 KB
  • Operating Voltage Range: 2.95V to 5.5V
  • I/O Pins: 37
  • Timers: 4
  • Communication Interfaces: UART, SPI, I2C
  • ADC Channels: 10-bit, 10 channels
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The STM8S207C6T6TR microcontroller has a total of 48 pins. The pin configuration is as follows:

  1. VSSA: Analog ground
  2. VDDA: Analog power supply
  3. VSS: Ground
  4. NRST: Reset pin
  5. PA0: General-purpose I/O pin
  6. PA1: General-purpose I/O pin
  7. PA2: General-purpose I/O pin
  8. PA3: General-purpose I/O pin
  9. PA4: General-purpose I/O pin
  10. PA5: General-purpose I/O pin
  11. PA6: General-purpose I/O pin
  12. PA7: General-purpose I/O pin
  13. PB0: General-purpose I/O pin
  14. PB1: General-purpose I/O pin
  15. PB2: General-purpose I/O pin
  16. PB3: General-purpose I/O pin
  17. PB4: General-purpose I/O pin
  18. PB5: General-purpose I/O pin
  19. PB6: General-purpose I/O pin
  20. PB7: General-purpose I/O pin
  21. PC0: General-purpose I/O pin
  22. PC1: General-purpose I/O pin
  23. PC2: General-purpose I/O pin
  24. PC3: General-purpose I/O pin
  25. PC4: General-purpose I/O pin
  26. PC5: General-purpose I/O pin
  27. PC6: General-purpose I/O pin
  28. PC7: General-purpose I/O pin
  29. PD0: General-purpose I/O pin
  30. PD1: General-purpose I/O pin
  31. PD2: General-purpose I/O pin
  32. PD3: General-purpose I/O pin
  33. PD4: General-purpose I/O pin
  34. PD5: General-purpose I/O pin
  35. PD6: General-purpose I/O pin
  36. PD7: General-purpose I/O pin
  37. PE0: General-purpose I/O pin
  38. PE1: General-purpose I/O pin
  39. PE2: General-purpose I/O pin
  40. PE3: General-purpose I/O pin
  41. PE4: General-purpose I/O pin
  42. PE5: General-purpose I/O pin
  43. PE6: General-purpose I/O pin
  44. PE7: General-purpose I/O pin
  45. VCAP: External capacitor connection for internal voltage regulator
  46. VSSD: Digital ground
  47. VDD: Digital power supply
  48. OSCIN/OSCOUT: Oscillator input/output

Functional Features

  • High-performance 8-bit microcontroller with advanced architecture
  • Low power consumption for energy-efficient applications
  • Wide operating voltage range allows flexibility in power supply options
  • Rich peripheral set including UART, SPI, and I2C interfaces
  • 10-bit ADC channels for accurate analog measurements
  • 4 timers for precise timing control

Advantages and Disadvantages

Advantages: - High-performance and low power consumption - Wide operating voltage range for flexibility - Rich peripheral set for versatile applications - Accurate analog measurements with the 10-bit ADC

Disadvantages: - Limited flash memory (32 KB) compared to some other microcontrollers - Limited RAM (2 KB) may restrict complex applications

Working Principles

The STM8S207C6T6TR microcontroller operates based on an 8-bit architecture. It executes instructions stored in its flash memory and interacts with various peripherals to perform desired tasks. The CPU frequency can reach up to 16 MHz, allowing for fast and efficient processing. The microcontroller can communicate with external devices through UART, SPI, and I2C interfaces. It also features a 10-bit ADC for accurate analog measurements. The low power

Texniki həllərdə STM8S207C6T6TR tətbiqi ilə bağlı 10 ümumi sual və cavabı sadalayın

Sure! Here are 10 common questions and answers related to the application of STM8S207C6T6TR in technical solutions:

  1. Q: What is the STM8S207C6T6TR microcontroller used for? A: The STM8S207C6T6TR is a microcontroller commonly used in various technical solutions, including industrial automation, consumer electronics, and automotive applications.

  2. Q: What is the maximum clock frequency supported by the STM8S207C6T6TR? A: The STM8S207C6T6TR supports a maximum clock frequency of 16 MHz.

  3. Q: How much flash memory does the STM8S207C6T6TR have? A: The STM8S207C6T6TR has 32 KB of flash memory for program storage.

  4. Q: Can I interface the STM8S207C6T6TR with other devices using serial communication protocols? A: Yes, the STM8S207C6T6TR supports various serial communication protocols such as UART, SPI, and I2C, allowing easy interfacing with other devices.

  5. Q: Does the STM8S207C6T6TR have built-in analog-to-digital converters (ADCs)? A: Yes, the STM8S207C6T6TR has two 10-bit ADCs, which can be used for analog signal acquisition.

  6. Q: What is the operating voltage range of the STM8S207C6T6TR? A: The STM8S207C6T6TR operates within a voltage range of 2.95V to 5.5V.

  7. Q: Can I use the STM8S207C6T6TR for low-power applications? A: Yes, the STM8S207C6T6TR features various low-power modes, allowing it to be used in battery-powered or energy-efficient applications.

  8. Q: Does the STM8S207C6T6TR have any built-in hardware timers? A: Yes, the STM8S207C6T6TR has multiple 16-bit timers, which can be used for tasks such as generating PWM signals or measuring time intervals.

  9. Q: Is there a development environment available for programming the STM8S207C6T6TR? A: Yes, STMicroelectronics provides an integrated development environment (IDE) called "ST Visual Develop" for programming and debugging STM8 microcontrollers.

  10. Q: Are there any application-specific reference designs or example code available for the STM8S207C6T6TR? A: Yes, STMicroelectronics provides various application notes, reference designs, and example code that can help developers get started with the STM8S207C6T6TR in different technical solutions.

Please note that these answers are general and may vary depending on specific requirements and use cases.