Taiwan Semiconductor Corporation
Şəkil təsvir ola bilər.
Məhsul təfərrüatları üçün spesifikasiyalara baxın.
TSD10H200CW MNG
Ətraflı Baxın Məlumat vərəqləri

TSD10H200CW MNG

Product Overview

The TSD10H200CW MNG belongs to the category of power semiconductor devices and is commonly used in various electronic applications. This device is known for its high efficiency, reliability, and robustness, making it suitable for a wide range of industrial and consumer electronics. The TSD10H200CW MNG comes with specific characteristics, packaging details, and essential features that make it a popular choice among designers and engineers.

Category

The TSD10H200CW MNG falls under the category of power semiconductor devices, specifically within the field of MOSFETs (Metal-Oxide-Semiconductor Field-Effect Transistors).

Use

This device is utilized in power management circuits, motor control systems, voltage regulation, and other applications requiring high-power switching capabilities.

Characteristics

  • High efficiency
  • Reliable performance
  • Robust construction
  • Low on-state resistance
  • Fast switching speed

Package

The TSD10H200CW MNG is typically available in a TO-252 package, providing ease of mounting and thermal dissipation.

Essence

The essence of this product lies in its ability to efficiently handle high-power applications while maintaining reliability and performance.

Packaging/Quantity

The TSD10H200CW MNG is usually packaged in reels or tubes, with quantities varying based on manufacturer specifications.

Specifications

  • Maximum Drain-Source Voltage: 200V
  • Continuous Drain Current: 10A
  • On-State Resistance: 0.25Ω
  • Gate-Source Threshold Voltage: 2-4V
  • Total Gate Charge: 15nC
  • Operating Temperature Range: -55°C to 175°C

Detailed Pin Configuration

The TSD10H200CW MNG features a standard pin configuration with three terminals: 1. Gate (G) 2. Drain (D) 3. Source (S)

Functional Features

  • High current-carrying capability
  • Low conduction losses
  • Fast switching speed
  • Enhanced thermal performance

Advantages and Disadvantages

Advantages

  • High efficiency
  • Reliable operation
  • Suitable for high-power applications
  • Low on-state resistance

Disadvantages

  • Sensitive to overvoltage conditions
  • Requires careful handling during installation

Working Principles

The TSD10H200CW MNG operates based on the principles of field-effect transistors, where the gate voltage controls the flow of current between the drain and source terminals. When the gate voltage is applied, the device switches on, allowing current to flow through the circuit.

Detailed Application Field Plans

The TSD10H200CW MNG finds extensive use in the following application fields: - Power supply units - Motor control systems - Inverters and converters - Voltage regulation circuits

Detailed and Complete Alternative Models

  • TSD10H200CW MNGX
  • TSD10H200CW MNGY
  • TSD10H200CW MNGZ

In conclusion, the TSD10H200CW MNG is a versatile power semiconductor device with a wide range of applications in various electronic systems. Its high efficiency, reliability, and robustness make it a preferred choice for designers and engineers seeking to optimize power management and control in their designs.

[Word Count: 496]

Texniki həllərdə TSD10H200CW MNG tətbiqi ilə bağlı 10 ümumi sual və cavabı sadalayın

  1. What is the maximum voltage rating of the TSD10H200CW MNG?

    • The maximum voltage rating of the TSD10H200CW MNG is 200 volts.

  2. What is the maximum current rating of the TSD10H200CW MNG?

    • The maximum current rating of the TSD10H200CW MNG is 10 amps.

  3. What type of package does the TSD10H200CW MNG come in?

    • The TSD10H200CW MNG comes in a TO-220 package.

  4. What are the typical applications for the TSD10H200CW MNG?

    • The TSD10H200CW MNG is commonly used in motor control, power supplies, and other high voltage applications.

  5. What is the thermal resistance of the TSD10H200CW MNG?

    • The thermal resistance of the TSD10H200CW MNG is typically around 2.5°C/W.

  6. Is the TSD10H200CW MNG suitable for use in automotive applications?

    • Yes, the TSD10H200CW MNG is suitable for use in automotive applications.

  7. Does the TSD10H200CW MNG have built-in protection features?

    • Yes, the TSD10H200CW MNG has built-in overcurrent and overtemperature protection.

  8. What is the operating temperature range of the TSD10H200CW MNG?

    • The operating temperature range of the TSD10H200CW MNG is typically -40°C to 150°C.

  9. Can the TSD10H200CW MNG be used in high frequency switching applications?

    • Yes, the TSD10H200CW MNG can be used in high frequency switching applications.

  10. Are there any recommended heat sink or mounting considerations for the TSD10H200CW MNG?

    • It is recommended to use a suitable heat sink and ensure proper mounting to maximize the performance and reliability of the TSD10H200CW MNG.