Məhsul təfərrüatları üçün spesifikasiyalara baxın.
NTCG163JH103JT1
Product Overview
Category
The NTCG163JH103JT1 belongs to the category of electronic components, specifically a thermistor.
Use
It is commonly used for temperature sensing and compensation in various electronic circuits and devices.
Characteristics
- Small size
- High sensitivity to temperature changes
- Wide operating temperature range
- Reliable performance
Package
The NTCG163JH103JT1 is typically available in a small surface-mount package.
Essence
This thermistor is essential for maintaining precise temperature control in electronic systems.
Packaging/Quantity
It is usually supplied in reels containing a specific quantity, such as 1000 pieces per reel.
Specifications
- Resistance: 10kΩ ±5%
- Operating Temperature Range: -40°C to 125°C
- Maximum Power Rating: 50mW at 25°C
- Thermal Time Constant: 7 seconds max.
Detailed Pin Configuration
The NTCG163JH103JT1 has two terminals, with the resistance value changing with temperature. The pin configuration is as follows: - Pin 1: Connects to the circuit ground - Pin 2: Connects to the input/output of the temperature sensing circuit
Functional Features
- Non-linear resistance response to temperature changes
- Stable and predictable behavior over the specified temperature range
- Suitable for use in various temperature compensation applications
Advantages
- Small form factor
- High sensitivity
- Wide operating temperature range
- Reliable and consistent performance
Disadvantages
- Non-linear response may require additional compensation in some applications
- Limited power handling capability
Working Principles
The NTCG163JH103JT1 operates based on the principle of negative temperature coefficient (NTC), where its resistance decreases as the temperature increases. This property allows it to be used for temperature measurement and compensation in electronic circuits.
Detailed Application Field Plans
The NTCG163JH103JT1 is widely used in the following applications: - Temperature sensors in automotive electronics - Thermal management in consumer electronics - Temperature compensation in industrial control systems - Medical devices requiring precise temperature monitoring
Detailed and Complete Alternative Models
Some alternative models to the NTCG163JH103JT1 include: - NTCG163JF103FT1 - NTCG163JH104JT1 - NTCG163JF104FT1
In summary, the NTCG163JH103JT1 thermistor is a versatile component with wide-ranging applications in temperature sensing and compensation. Its small size, high sensitivity, and reliable performance make it an essential part of many electronic systems.
Word Count: 398
Texniki həllərdə NTCG163JH103JT1 tətbiqi ilə bağlı 10 ümumi sual və cavabı sadalayın
What is NTCG163JH103JT1?
- NTCG163JH103JT1 is a type of NTC thermistor, which is a temperature-sensitive resistor that exhibits a decrease in resistance with an increase in temperature.
What are the typical applications of NTCG163JH103JT1?
- NTCG163JH103JT1 is commonly used in temperature sensing and compensation, inrush current limiting, and temperature control circuits in various electronic devices and systems.
What is the resistance value of NTCG163JH103JT1 at room temperature?
- The resistance value of NTCG163JH103JT1 at room temperature is 10k ohms (10,000 ohms).
How does NTCG163JH103JT1 behave in response to temperature changes?
- NTCG163JH103JT1 exhibits a negative temperature coefficient, meaning its resistance decreases as the temperature increases.
What is the operating temperature range of NTCG163JH103JT1?
- The operating temperature range of NTCG163JH103JT1 typically spans from -40°C to 125°C, making it suitable for a wide range of environmental conditions.
Can NTCG163JH103JT1 be used for overcurrent protection?
- Yes, NTCG163JH103JT1 can be utilized for overcurrent protection due to its property of increasing resistance when subjected to high currents, thereby limiting the inrush current.
Is NTCG163JH103JT1 suitable for battery pack temperature monitoring?
- Yes, NTCG163JH103JT1 is often employed for battery pack temperature monitoring to ensure safe and efficient operation of the battery system.
What are the key considerations when designing a circuit using NTCG163JH103JT1?
- Key considerations include selecting the appropriate biasing and conditioning circuitry, ensuring proper thermal coupling, and accounting for self-heating effects.
Are there any specific soldering or mounting requirements for NTCG163JH103JT1?
- It is important to follow the manufacturer's guidelines for soldering and mounting to prevent damage to the NTC thermistor and ensure reliable performance.
Where can I find detailed specifications and application notes for NTCG163JH103JT1?
- Detailed specifications and application notes for NTCG163JH103JT1 can be found in the product datasheet provided by the manufacturer, as well as in technical resources from reputable electronics component distributors and industry publications.