TDK Corporation
Şəkil təsvir ola bilər.
Məhsul təfərrüatları üçün spesifikasiyalara baxın.
NTCG164LH223JT1
Ətraflı Baxın Məlumat vərəqləri

NTCG164LH223JT1

Product Overview

Category

The NTCG164LH223JT1 belongs to the category of electronic components, specifically a thermistor.

Use

It is commonly used for temperature sensing and compensation in various electronic circuits and devices.

Characteristics

  • Temperature-sensitive resistor
  • Small size
  • High accuracy
  • Wide operating temperature range

Package

The NTCG164LH223JT1 is typically available in a surface mount package.

Essence

This thermistor is essential for maintaining precise temperature control in electronic systems.

Packaging/Quantity

It is usually supplied in reels containing a specific quantity, such as 1000 units per reel.

Specifications

  • Resistance: 22kΩ at 25°C
  • Tolerance: ±5%
  • Operating Temperature Range: -40°C to 125°C
  • Maximum Power Rating: 150mW

Detailed Pin Configuration

The NTCG164LH223JT1 has two terminals, with the resistance value measured across these terminals. The pin configuration is as follows: - Pin 1: Terminal A - Pin 2: Terminal B

Functional Features

  • Non-linear resistance response to temperature changes
  • High sensitivity to temperature variations
  • Stable performance over a wide temperature range

Advantages

  • Accurate temperature measurement
  • Compact size
  • Suitable for various applications
  • Reliable performance

Disadvantages

  • Non-linear response may require additional calibration in some applications
  • Limited power handling capacity

Working Principles

The NTCG164LH223JT1 operates based on the principle of negative temperature coefficient (NTC), where its resistance decreases as the temperature increases. This property allows it to be used for temperature sensing and compensation in electronic circuits.

Detailed Application Field Plans

The NTCG164LH223JT1 is widely used in the following applications: - Temperature monitoring and control in consumer electronics - Thermal management in automotive systems - Temperature compensation in industrial equipment - Medical devices requiring precise temperature sensing

Detailed and Complete Alternative Models

Some alternative models to the NTCG164LH223JT1 include: - NTCG164LH103JT1 - NTCG164LH104JT1 - NTCG164LH473JT1 - NTCG164LH474JT1

These alternative models offer similar temperature sensing capabilities with varying resistance values.

In conclusion, the NTCG164LH223JT1 thermistor is a crucial component in electronic systems, providing accurate temperature sensing and compensation. Its compact size, high sensitivity, and wide operating temperature range make it suitable for diverse applications across different industries.

[Word Count: 366]

Texniki həllərdə NTCG164LH223JT1 tətbiqi ilə bağlı 10 ümumi sual və cavabı sadalayın

Sure, here are 10 common questions and answers related to the application of NTCG164LH223JT1 in technical solutions:

  1. What is the NTCG164LH223JT1 used for?

    • The NTCG164LH223JT1 is a thermistor commonly used for temperature sensing and compensation in various electronic circuits.

  2. What is the resistance value of NTCG164LH223JT1 at room temperature?

    • The resistance value of NTCG164LH223JT1 at room temperature is 22k ohms.

  3. How does NTCG164LH223JT1 behave with changes in temperature?

    • NTCG164LH223JT1 is a negative temperature coefficient (NTC) thermistor, meaning its resistance decreases as the temperature increases.

  4. What is the operating temperature range of NTCG164LH223JT1?

    • The operating temperature range of NTCG164LH223JT1 is typically from -55°C to 150°C.

  5. Can NTCG164LH223JT1 be used for temperature compensation in power supplies?

    • Yes, NTCG164LH223JT1 can be used for temperature compensation in power supplies to stabilize the output voltage over a range of temperatures.

  6. Is NTCG164LH223JT1 suitable for battery pack temperature monitoring?

    • Yes, NTCG164LH223JT1 is suitable for battery pack temperature monitoring to ensure safe and efficient operation.

  7. What are the typical applications of NTCG164LH223JT1 in automotive electronics?

    • NTCG164LH223JT1 is commonly used in automotive electronics for temperature sensing in engine control systems, battery management, and climate control.

  8. Can NTCG164LH223JT1 be used in medical devices for temperature measurement?

    • Yes, NTCG164LH223JT1 can be used in medical devices for accurate temperature measurement and control.

  9. Does NTCG164LH223JT1 require any calibration before use?

    • NTCG164LH223JT1 may require initial calibration to ensure accurate temperature measurements in specific applications.

  10. Are there any special considerations for PCB layout when using NTCG164LH223JT1?

    • It's important to consider proper PCB layout techniques to minimize self-heating effects and ensure accurate temperature sensing with NTCG164LH223JT1.

I hope these questions and answers provide helpful information about the application of NTCG164LH223JT1 in technical solutions. Let me know if you need further assistance!