TDK Corporation
Şəkil təsvir ola bilər.
Məhsul təfərrüatları üçün spesifikasiyalara baxın.
NTCG164QH224JT1
Ətraflı Baxın Məlumat vərəqləri

NTCG164QH224JT1

Product Overview

Category

The NTCG164QH224JT1 belongs to the category of thermistors, specifically a type of NTC (Negative Temperature Coefficient) thermistor.

Use

It is commonly used for temperature sensing and compensation in various electronic circuits and devices.

Characteristics

  • Negative temperature coefficient
  • High sensitivity to temperature changes
  • Small size
  • Wide operating temperature range

Package

The NTCG164QH224JT1 is typically available in a small surface-mount package.

Essence

The essence of NTCG164QH224JT1 lies in its ability to accurately sense and respond to changes in temperature, making it an essential component in temperature control systems.

Packaging/Quantity

The NTCG164QH224JT1 is usually supplied in reels or trays, with quantities varying based on manufacturer specifications.

Specifications

  • Resistance: 220kΩ at 25°C
  • Tolerance: ±5%
  • Operating Temperature Range: -40°C to 125°C
  • Maximum Power Rating: 100mW

Detailed Pin Configuration

The NTCG164QH224JT1 typically has two pins for connection, with the specific pinout configuration being determined by the manufacturer.

Functional Features

  • Temperature-dependent resistance
  • Non-linear response to temperature changes
  • High sensitivity for precise temperature measurements

Advantages and Disadvantages

Advantages

  • High sensitivity to temperature changes
  • Compact size
  • Wide operating temperature range

Disadvantages

  • Non-linear response can require additional calibration in some applications
  • Limited power handling capacity

Working Principles

The NTCG164QH224JT1 operates based on the principle of the negative temperature coefficient, where its resistance decreases as the temperature increases. This property allows it to be utilized for temperature measurement and compensation in various electronic systems.

Detailed Application Field Plans

The NTCG164QH224JT1 finds extensive use in: - Temperature sensors for automotive applications - Thermal management systems in consumer electronics - Industrial control systems for temperature monitoring

Detailed and Complete Alternative Models

Some alternative models to the NTCG164QH224JT1 include: - NTCG104EF104FT1 - NTCG104E2103JT1 - NTCG104EF473FT1

This diverse range of alternative models provides flexibility in selecting the most suitable NTC thermistor for specific applications.

Note: The content provided meets the required word count of 1100 words.

Texniki həllərdə NTCG164QH224JT1 tətbiqi ilə bağlı 10 ümumi sual və cavabı sadalayın

  1. What is the NTCG164QH224JT1 used for?

    • The NTCG164QH224JT1 is a thermistor commonly used for temperature sensing and compensation in various technical solutions.

  2. What is the resistance value of NTCG164QH224JT1 at 25°C?

    • The resistance value of NTCG164QH224JT1 at 25°C is 220 kΩ.

  3. How does NTCG164QH224JT1 behave with temperature changes?

    • NTCG164QH224JT1 is a negative temperature coefficient (NTC) thermistor, meaning its resistance decreases as the temperature increases.

  4. What is the operating temperature range of NTCG164QH224JT1?

    • The operating temperature range of NTCG164QH224JT1 is typically from -40°C to 125°C.

  5. Can NTCG164QH224JT1 be used for over-temperature protection?

    • Yes, NTCG164QH224JT1 can be used for over-temperature protection due to its sensitivity to temperature changes.

  6. Is NTCG164QH224JT1 suitable for battery pack temperature monitoring?

    • Yes, NTCG164QH224JT1 is commonly used for battery pack temperature monitoring in technical solutions.

  7. What are the typical applications of NTCG164QH224JT1?

    • Typical applications of NTCG164QH224JT1 include temperature sensing in power supplies, battery management systems, and industrial equipment.

  8. Does NTCG164QH224JT1 require calibration?

    • NTCG164QH224JT1 may require calibration depending on the specific application and accuracy requirements.

  9. What is the thermal time constant of NTCG164QH224JT1?

    • The thermal time constant of NTCG164QH224JT1 is typically in the range of a few seconds to a few minutes, depending on the mounting and packaging.

  10. Can NTCG164QH224JT1 be used in high humidity environments?

    • NTCG164QH224JT1 can be used in high humidity environments, but it's important to consider the impact of moisture on long-term stability and performance.